MACK MS-SERIESMack Ms-series

Vehicle Details: Service Bulletins

Below you will find all available information on the MACK MS-SERIES, manufacturered by Mack Canada Inc..

ManufacturerKnown WMI(s)Fuel Type
MACK2M1 VG6
MACK VIN Decoder

Use the box here to look up VINs from MACK as well as other manufacturers

#
Frequently Asked Questions
  • Where is the MACK MS-SERIES produced?
     - The MACK MS-SERIES is produced in Toronto , Canada.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • KC-733 - ENGINE AND ENGINE COOLING: Back office mack chassis - secondary gauge set up - model year 2018 and newer.
  • KC-2107 - ENGINE AND ENGINE COOLING: Def level (uqls) sensor troubleshooting guide - us17+obd16 emissions and newer.
  • KC-2112 - ELECTRICAL SYSTEM: Programming failure - chassis with cummins engine and an allison transmission
  • KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions.
  • KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
  • KC-2157 - FUEL SYSTEM, GASOLINE: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions.
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions.
  • KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions.
  • KC-399 - ELECTRICAL SYSTEM: Vehicle overspeed warning comes active at a lower speed than expected; vehicle overspeed warning in driver information display (did) - model year 2018 and newer with new style instrument cluster.
  • KC-405 - POWER TRAIN: Warranty automated manual transmission ( amt, i-shift, mdrive ) control housing assembly; guidelines for filing a claim for chassis return visit with transmission issues after a repair requiring control housing removal and reinstallation -
  • KC-561 - ENGINE AND ENGINE COOLING: 11l, 13l, and 16l engine oil analysis specifications - us10 and newer emissions
  • KC-735 - EQUIPMENT: Premium tech tool (ptt) - message for data mismatch, product configuration mismatch; instruction to run an accessory kit displayed when attempting to run diagnostics for diagnostic trouble codes (dtc) or programming - us10+obd13 and newer e
  • KC-736 - ENGINE AND ENGINE COOLING: (back office only) - engine brake vibration when in high setting - 13l engine with variable geometry turbo ( vgt ) - us17 and newer emissions (common rail fuel system).
  • KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
  • KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
  • KC-751 - POWER TRAIN: Vehicles equipped with an automated manual transmission model d or f ( amt-d, amt-f ) - transmission oil leakage from transmission input shaft seal or output shaft seal - us10 and newer emissions, common model years 2010 and newer.
  • KC-2149 - ENGINE AND ENGINE COOLING: Particulate matter (pm) sensor troubleshooting guide - us14+obd16 and newer emissions
  • KC-2157 - ENGINE AND ENGINE COOLING: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
  • KC-399 - VEHICLE SPEED CONTROL: Vehicle overspeed warning comes active at a lower speed than expected; vehicle overspeed warning in driver information display (did) - model year 2018 and newer with new style instrument cluster
  • KC-561 - ENGINE AND ENGINE COOLING: 11l, 13l, and 16l engine oil analysis specifications - us10 and newer emissions
  • KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
  • KC-644 - ENGINE AND ENGINE COOLING: Manual compression test adapter for engines with stainless steel injector sleeves (conical tip injectors) - us07 and newer emissions, model year 2008 and newer
  • KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
  • KC-2172 - UNKNOWN OR OTHER: No start condition after over the air programing - vecu5 no start "safe state"
  • KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
  • KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
  • KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
  • KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
  • KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
  • KC-2157 - ENGINE AND ENGINE COOLING: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions
  • KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
  • KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
  • KC-633 - WHEELS: Mack chassis - front hub with unit-bearings ( unitized wheel bearings ), inspection information and guidelines - commonly model year 2008 and newer
  • KC-648 - UNKNOWN OR OTHER: Mack - pto pump speed calculator
  • KC-651 - EQUIPMENT: Mack dealer support communication - selecting the proper sr area for creating an eservice
  • KC-652 - ENGINE AND ENGINE COOLING: Mack low oil pressure diagnostic process for 11 liter engines
  • KC-659 - FUEL SYSTEM, DIESEL: Mack chassis - oil diluted with fuel; fuel in oil, diagnostic information - all emissions prior to us17+obd16 (common rail fuel system), model year 2017 and older
  • KC-686 - VEHICLE SPEED CONTROL: (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
  • KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
  • KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
  • KC-700 - POWER TRAIN: Mack chassis - automated manual transmission model f ( amt-f, mdrive ) - short transmission replacement; calibration and/or shifting problems following replacement of a short transmission - us17+obd2016 and newer emissions, model year 2018
  • KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
  • KC-731 - POWER TRAIN: Mack chassis - equipped with an automated manual transmission model d or f (mdrive, amt-d, amt-f) - transmission oil leakage from transmission input shaft seal or output shaft seal - us10 and newer emissions, common model years 2010 and new
  • KC-587 - ENGINE (PWS): Mack chassis - snm15-027 a/c compressor inspection required for warranty repairs
  • KC-354 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Volvo chassis - certain volvo trucks built after january 11, 2016 may experience an issue with the instrument cluster display
  • KC-286 - UNKNOWN OR OTHER: Mack chassis - fsb 563-008 plugs, pressure protection manifold - new brass plugs for noregon pressure protection manifold (ppm)
  • KC-145 - POWER TRAIN: Automated manual transmission (amt) (spigot bearing) input shaft repair kit and shim kit, part number information, reference guide - us07 and newer emissions, model year 2008 and newer
  • KC-124 - POWER TRAIN: Automated manual transmission gearbox will not shift to high range after gearbox repair; mid 130 psid 24 fmi 1, P1072-92 unintentional disengagement of high range - us07 and newer emissions, model year 2008 and newer
  • SLM21-007 - EQUIPMENT: Service literature published and released in july, 2021
  • P040200 - ENGINE AND ENGINE COOLING: Engine exhaust gas recirculation 1 valve position flow excessive detected
  • S7432 - EQUIPMENT: Vecu reprogramming
  • S7431 - STEERING: Steering drag link castle nut inspection
  • S7416 - EQUIPMENT: Wait to start icon-cummins l9
  • S7415 - EQUIPMENT: 8x4 gr-air dryer relocation
  • S7413 - ENGINE AND ENGINE COOLING: My13-16 eats replacement-phase 1
  • K36340146 - ELECTRICAL SYSTEM: Tech tool returns error code 140 failed to run on-vehicle test; programming, calibration, or test operations fail in premium tech tool (ptt), ptt displays control unit information correctly - us10+obd13 and newer emissions, common model yea
  • K24413634 - ELECTRICAL SYSTEM: Mack chassis - diagnostic trouble code ( dtc ) / fault code spn 1231 fmi 9 inactive on dtc readout, counts in multiples of three - us10 emissions.Reworded for clarity, added link to related cbr solution.
  • K11533602 - ELECTRICAL SYSTEM: Diagnostic tool ( j-pro, premium tech tool ( ptt ) ) displays incorrect timestamp for diagnostic trouble code ( dtc ) / fault code occurrences; system date and time information.Improved title and description for better searchability
  • K93039325 - FUEL SYSTEM, GASOLINE: Mack chassis - diesel exhaust fluid ( def ) contamination in fuel system, inspection and repair - us10 and newer; includes us17 chassis (ghg17 only document in development)
  • K91214678 - POWER TRAIN:MANUAL TRANSMISSION: Automated manual transmission ( amt ) faults - diagnostic trouble codes ( dtcs ) P1052 - 18 , pid 33 fmi 5 intermittent fault in cold weather.Updated with new information and procedure
  • 210007 - ENGINE AND ENGINE COOLING:ENGINE: Torque specification changes. *tt
  • 233002 - ENGINE AND ENGINE COOLING:ENGINE: Air filter retaining lockout and washer. *tt
  • MB273002 - ELECTRICAL SYSTEM: Subject regarding the injection timing control (itc) boost pressure sensor. *tt
  • MB131002 - SUSPENSION: Subject regarding ms chassis lean - some ms chassis manufactured from 1994 on, a distinct lean to the left or right front may be noticed. Nlm
  • MB2000022 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE: Subject regarding specifications for mid-liner midr 06.02.26 aa711 and ab711 engines. *tt
  • 200200126901 - ENGINE AND ENGINE COOLING:COOLING SYSTEM: Subject regarding engine coolant color change. *tt
  • 200200114501 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN: Subject regarding midliner fan shroud seal failures. *tt
  • MB221008 - VEHICLE SPEED CONTROL:CRUISE CONTROL: Information on setting idle speed on vehicles equipped with an allison automatic transmission exhibiting a stall condition while idling at operating temperatures with the transmission in gear. *tt
  • MB700003 - ELECTRICAL SYSTEM:WIRING: This bulletin has been reissued because the wiring diagram was changed to make the heater blower motor circuit easier to understand, and to eliminate the two blower motor relays. *tt
  • MB221006 - ENGINE AND ENGINE COOLING:ENGINE: Subject regarding additional information used when diagnosing a 3-8 code on certain model chassis outlined in the injection timing control service manual. *tt
  • MB723002 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM): This bulletin supplies the wiring diagrams for chassis equipped with the allison md3060 world transmission. *tt
  • MB211004 - ENGINE AND ENGINE COOLING:ENGINE: Information on oil pan leakage. *tt
  • MB700003 - ELECTRICAL SYSTEM: Subject regarding electrical wiring diagrams for chassis beginning with february 17, 1999 production. *tt
  • MB732003 - POWER TRAIN: Subject regarding electronic speedometer speed output signal. *tt
  • MB212012 - ENGINE AND ENGINE COOLING:ENGINE: Subject regarding three-groove crankshaft pulley for midr 06.02.26 l711 / m711 / ab711 engines. *tt
  • MB212005 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE: Information regarding the piston/sleeve mating on selected engines. *mjs
  • MB732002 - POWER TRAIN: Information regarding the mid-liner electronic speedometer wiring diagram, production implementation for the electronic speedometer was january 1999. *mjs
  • MB136001 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM: Information regarding the mid-liner air suspension system. *mjs
  • MB234005 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information regarding the exhaust pipe support bracket on the midr 06.02.26 l 510/511 engines, model production as of march 1998. *mjs
  • MB651001 - SEATS: Subject regarding driver's seat back rails and scuff plates. *tt
  • MB723001 - SERVICE BRAKES, AIR:ANTILOCK: Information on performing wheelbase changes on chasis equipped with anti-lock brakes. *tt
  • MB233001 - FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM: Information on plastic canister air cleaner replacement kit. *tt
  • MB723001 - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP: Information on performing wheelbase changes on chassis equipped with anti-lock brakes. *tt
  • MB231001 - FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM: Brief information regarding fuel tank sending unit. *tt
  • MB234005 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Information on exhaust pipe support bracket. *tt
  • MB271002 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR: Subject regarding the mitsubishi 70 amp alternator. *tt
  • MB234005 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Subject regarding the availability of exhaust pipe support bracket. *tt

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.