Oshkosh S Series 1979
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 1979 OSHKOSH S Series.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
OSHKOSH |
OSHKOSH VIN Decoder
Use the box here to look up VINs from OSHKOSH as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 1979 OSHKOSH S Series?
- There are no recalls in our database for the 1979 OSHKOSH S Series.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- FDM-SVC-030 - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin provides instruction for installing a hydraulic system charge pump filter.
- FDM-TSIB-043 - EQUIPMENT: This bulletin provides information on updating hydraulic hose clamping below the cab to match current production. Engineering recommends changing out the front stauff clamp using the following procedure. The second stauff clamp can be cha
- FDM-TSIB-027 - POWER TRAIN: This bulletin provides information for vehicle owners that have a dana series 172 or 175 rear axle without a lubricant drain plug in the bottom of the axle housing.
- FDM-TSIB-026 - POWER TRAIN: This bulletin provides instruction for replacing the mixer pump pto shaft, mixer pump input yoke, and mixer pump input yoke bearing u-bolts to the current production configuration. The new pto shaft is larger with greaseable crosses and r
- FDM-TSIB-025 - EQUIPMENT: This bulletin provides instructions for bolting the water tank mounting feet to the water tank if the bonded feet become loose.
- FDM-SVC-002 - EQUIPMENT: This bulletin provides instruction for replacing the water pump impeller due to corrosion. Oshkosh has received reports of non-working water pumps due to the pump impeller becoming corroded and seized, causing the pump not to spin. A new
- FDM-TSIB-024 - ELECTRICAL SYSTEM: This bulletin provides instruction for checking electrical connections at various critical locations. Loose electrical connections can cause false readings and lead to electrical system errors.
- FDM-TSIB-023 - ELECTRICAL SYSTEM: This bulletin provides instruction on replacing the frame ground stud nut located at the rear of the vehicle on the inside right-hand frame rail. Engineering has changed the nut from a jam nut to a lock nut after receiving reports of the