Oshkosh S-series 2015

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2015 OSHKOSH S-series.

ManufacturerKnown WMI(s)Fuel Type
OSHKOSH
OSHKOSH VIN Decoder

Use the box here to look up VINs from OSHKOSH as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2015 OSHKOSH S-series?
     - There are 4 recall(s) for the 2015 OSHKOSH S-series, additional information is below.
NHTSA Mandated Recalls
  • Recall 134511 [USA]: Strobe lights in this location may be wrongly interpreted when signaling others, increasing the risk of crash.

  • Recall 115243 [USA]: If the prd does not activate in the event of a buildup of pressure, the cng tank may explode, increasing the risk of fire and injury.

  • Recall 110208 [USA]: If the mounting bolts loosen, the bolts on the torque converter bolt flange may shear, resulting in a sudden loss of drive power, and increasing the risk of a crash.

  • Recall 107393 [USA]: With the air tank volume being less than required, in certain situations the vehicle may have an insufficient quantity of air to operate the brakes, increasing the risk of a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • FDM_TSIB-047 - EQUIPMENT: This bulletin provides instructions for installing rubber hose stauff clamps in areas of the vehicle that have hard line stauff clamps installed on rubber hoses. Rubber hose stauff clamps have a smooth inner contact surface and filleted
  • FDM-TSIB-046 - SUSPENSION: This bulletin provides instructions for installing new updated front shock absorbers and upper mounting brackets. The updated shock absorber and mounting bracket lowers the top of the shock absorber improving the allowable maximum trave
  • FDM-SVC-030 - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin provides instruction for installing a hydraulic system charge pump filter.
  • FDM-TSIB-043 - EQUIPMENT: This bulletin provides information on updating hydraulic hose clamping below the cab to match current production. Engineering recommends changing out the front stauff clamp using the following procedure. The second stauff clamp can be cha
  • FDM-TSIB-041 - POWER TRAIN: This bulletin provides information on topics specific to transmission high temperature warnings reported in the field. The topics listed were helpful in preventing transmission high temperature warning conditions.
  • FDM-TSIB-027 - POWER TRAIN: This bulletin provides information for vehicle owners that have a dana series 172 or 175 rear axle without a lubricant drain plug in the bottom of the axle housing.
  • FDM-TSIB-026 - POWER TRAIN: This bulletin provides instruction for replacing the mixer pump pto shaft, mixer pump input yoke, and mixer pump input yoke bearing u-bolts to the current production configuration. The new pto shaft is larger with greaseable crosses and r
  • FDM-TSIB-025 - EQUIPMENT: This bulletin provides instructions for bolting the water tank mounting feet to the water tank if the bonded feet become loose.
  • FDM-SVC-002 - EQUIPMENT: This bulletin provides instruction for replacing the water pump impeller due to corrosion. Oshkosh has received reports of non-working water pumps due to the pump impeller becoming corroded and seized, causing the pump not to spin. A new
  • FDM-TSIB-024 - ELECTRICAL SYSTEM: This bulletin provides instruction for checking electrical connections at various critical locations. Loose electrical connections can cause false readings and lead to electrical system errors.
  • FDM-TSIB-023 - ELECTRICAL SYSTEM: This bulletin provides instruction on replacing the frame ground stud nut located at the rear of the vehicle on the inside right-hand frame rail. Engineering has changed the nut from a jam nut to a lock nut after receiving reports of the
  • TB-H807-REV C - SUSPENSION:MULTIPLE AXLE: This technical bulletin is for some oshkosh s-series front discharge concrete mixer trucks that are fitted with an optional hendrickson load span tag axle (lsta). This publication is intended to assist with the identification and replacemen
  • Hendrickson TB-H - POWER TRAIN:AXLE ASSEMBLY: This document is a sample customer letter and the technical service bulletin from hendrickson. Hendrickson has determined that load span tag axles on oshkosh s-series concrete mixers develop cracking in the axle seat connections. Cracking w

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.