Temsa Ts30 2016
Vehicle Details: Decoded VIN Details, Service Bulletins
TEMSA VIN Decoder
Use the box here to look up VINs from TEMSA as well as other manufacturers
Frequently Asked Questions
-
Where is the 2016 TEMSA TS30 produced?
- The 2016 TEMSA TS30 is produced in Adana Adana, Turkey.
-
What is the GVWR of a 2016 TEMSA TS30?
- The 2016 TEMSA TS30 has a GVWR of Class 7: 26,001 - 33,000 lb (11,794 - 14,969 kg) lbs.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
- TS-C115 - SUSPENSION: This bulletin defines alignment specifications of the ts35 vehicle. Alignment of ts 30.
- TC-C113 - SUSPENSION: This bulletin defines alignment specifications of the ts30 vehicle. Alignment specifications of ts 35.
- No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
- TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
- TS35E - EQUIPMENT: The lift
- TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
- TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
- Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
- TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
- TS-U111 - FUEL SYSTEM, GASOLINE: New flap is to be installed in fuel tank filler cap
- TS-U107 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-C105 - EQUIPMENT: Relocating transmission oil dipstick
- RAS SYSTEM BLEED - STEERING: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
- No comms 2020-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2020 for temsa.
- TS-C113 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Alignment sepcifications of ts30. This bulletin defines alignment specifications of the ts30 vehicle.
- TS-C109 - POWER TRAIN: Relocating transmission oil dipstick. For ease of access to oil dipstick of the transmission, filling rod has been rerouted.
- Information Docu - EQUIPMENT: Information document sheet.
- TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
- RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
- TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
- Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
- 9020-230Y - ELECTRICAL SYSTEM: Ts 35 epa13 wiring. Refer to section 6 and section for hardware pin-out of moki, zr32, multiplexers, and can lines. As the multiplex unites are controlled by special algorithm, in case needed, the latest vehicle program should be downloade
NHTSA decoded information from VIN
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Class | Bus |
Brake System Type | Air |
Bus Type | Tourist Coach |
Cooling Type | Water |
DisplacementCC | 6700.0 |
DisplacementCI | 408.85908543470 |
DisplacementL | 6.7 |
Engine Configuration | In-Line |
Engine Cycles | 4 |
Engine Cylinders | 6 |
Engine Manufacturer | Cummins |
Engine Model | EPA16 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Diesel |
Fuel Type Secondary | Diesel |
GVWR | Class 7: 26,001 - 33,000 lb (11,794 - 14,969 kg) |
Make | TEMSA |
MakeID | 563 |
Manufacturer | TEMSA SKODA SABANCI ULASIM ARACLARI A.S. |
Manufacturer Id | 1129 |
Model | TS30 |
ModelID | 9772 |
Model Year | 2016 |
NCSA Body Type | Cross Country/Intercity Bus |
NCSA Make | Other Make |
NCSA Model | Bus: Rear engine, Flat front |
Other Bus Info | Length: 9.01~9.50 meters, Body - Decker: STD Decker Stainless Steel, Motorcoach |
Other Engine Info | 245~329 BHP; High-Pressure common rail (HPCR) system |
Plant City | ADANA |
Plant Country | TURKEY |
Plant State | ADANA |
Turbo | Yes |
VIN | NLTAPLY58G1000170 |
Valve Train Design | Overhead Valve (OHV) |
Vehicle Descriptor | NLTAPLY5*G1 |
Vehicle Type | BUS |
Latest VINs Decoded for this Manufacturer
VIN | Year | Model | Manufactured In |
---|---|---|---|
NLTAPLY5XG1000168 | 2016 | TS30 | ADANA ADANA, TURKEY |
NLTAPLY58G1000170 | 2016 | TS30 | ADANA ADANA, TURKEY |