Temsa Ts45 2013
Vehicle Details: Recalls, Service Bulletins
TEMSA VIN Decoder
Use the box here to look up VINs from TEMSA as well as other manufacturers
Frequently Asked Questions
-
Where is the 2013 TEMSA Ts45 produced?
- The 2013 TEMSA Ts45 is produced in ADANA Adana, Turkey.
-
Are there recalls for the 2013 TEMSA Ts45?
- There are 2 recall(s) for the 2013 TEMSA Ts45, additional information is below.
NHTSA Mandated Recalls
Recall 145873 [USA]: Delays in opening emergency exits can increase the risk of an injury in the event of an emergency.
Recall 112161 [USA]: The low air pressure may cause the parking brakes to drag while the vehicle is in motion resulting in the overheating of the disc brakes, increasing the risk of a fire.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
- TS-M114 - STRUCTURE: This bulletin is made to replace body levelling system by the new one on ts45 vehicles. Avoiding flip of leveling valve.
- TS-C116 - SUSPENSION: This bulletin defines alignment specifications of the ts45 vehicle. Alignment specifications of the ts45 vehicles.
- No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
- TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
- TS35E - EQUIPMENT: The lift
- TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
- TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
- Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
- TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
- TS-S112 - WHEELS: This bulletin is prepared to replace the current steel rims of the drive axle with the new ones on ts45 vehicles
- TS-U111 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-U107 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-C105 - EQUIPMENT: Relocating transmission oil dipstick
- RAS SYSTEM BLEED - EQUIPMENT: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
- KIBES Interface - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Kibes interface pin-out diagram.
- TS-S112 - WHEELS: Steel rims offset problem. This bulletin is prepared to replace the current steel rims of the drive axle with the new ones on ts45 vehicles.
- TS-M114 - EQUIPMENT: Avoiding flip of leveling valve. This bulletin is made to replace body levelling system by the new one on ts45 vehicles.
- Information Docu - POWER TRAIN:AUTOMATIC TRANSMISSION: Information document sheet.
- TS-S112 - WHEELS: Steel rims offset improvement. This bulletin is prepared to replace the current steel rims of the drive axle with the new ones on ts45 vehicles.
- TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
- RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
- TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
- Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
- TS-M127 - STRUCTURE:BODY: Zf service information bulletin for retrofitting seal carrier and readjustment of king pin