Volvo Wah 1994

• Recall 13118 [USA]: This condition would result in increased stopping distances.
  Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
  dealers will install the necessary air pressure protection valve.
  owner notification began during november 1998. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1-800-528-6586.Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 17732 [USA]: Undercoating on the plunger may cause the plunger to stick resulting in increased brake pedal effort and/or slow release of the brakes increasing the potential for a vehicle accident.
  Undercoating applied to the inside of the cab shell squeezed out during assembly onto the brake pedal plunger.
  dealers will clean the undercoating from the brake pedal plunger assembly, lubricate and reinstall the brake pedal plunger assembly.
  system: brakes; air; pedals; linkages and valves.Vehicle description: heavy duty class 8 trucks.Note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo gm heavy truck at 1-800-528-6586. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 1998246 [Canada]: Brakes
  On certain vehicles, the air ride suspension control valve supply line is not plumbed through an air pressure protection valve. In the event of an air suspension bag failure, there will be loss of air pressure in the "b" system which supplies air pressure to the front steer axle brakes. This could result in loss of front steer axle brakes and increased stopping distances. Correction: air pressure protection valve will be installed.

  Show Content

• Recall 1995225 [Canada]: Brakes
  Some of the undercoating applied to the inside of the cab shell may have squeezed out during assembly onto the brake pedal plunger. This may cause the pedal to stick resulting in increased brake pedal effort and/or slow release of the brakes. Correction: brake pedal plunger assembly will be cleaned, then lubricated and reassembled.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.