FSB-357-002
Service Bulletin Details
Public Details for: FSB-357-002
Volvo: light control module (lcm), reprogramming. On some volvo units equipped with clear led clearance lights in the sun visor, the may exhibit an active fault code mid 216 psid 49 fmi 5. This fault indicates a trailer marker open issue wh
- 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 -
Models from 2012
2012 VOLVO VAH |
2012 VOLVO VHD |
Models from 2011
2011 VOLVO VAH |
2011 VOLVO VHD |
2011 VOLVO VN |
Models from 2010
2010 VOLVO VHD |
2010 VOLVO VN |
2010 VOLVO VT |
Models from 2009
2009 VOLVO VHD |
2009 VOLVO VN |
2009 VOLVO VT |
Models from 2008
2008 VOLVO VHD |
2008 VOLVO VN |
2008 VOLVO VT |
Models from 2007
2007 VOLVO VHD |
2007 VOLVO VN |
2007 VOLVO VT |
Models from 2006
2006 VOLVO VHD |
2006 VOLVO VN |
2006 VOLVO VT |
Models from 2005
2005 VOLVO VHD |
2005 VOLVO VN |
2005 VOLVO VT |
Models from 2004
2004 VOLVO VHD |
2004 VOLVO VN |
2004 VOLVO VT |
Models from 2003
2003 VOLVO VHD |
2003 VOLVO VN |
2003 VOLVO VT |
Models from 2002
2002 VOLVO VHD |
2002 VOLVO VN |
2002 VOLVO VT |
Models from 2001
2001 VOLVO VHD |
2001 VOLVO VN |
2001 VOLVO VT |
Models from 2000
2000 VOLVO VHD |
2000 VOLVO VN |
Models from 1999
1999 VOLVO VHD |
1999 VOLVO VN |
Models from 1998
1998 VOLVO VN |
Models from 1997
1997 VOLVO VN |
Models from 1996
1996 VOLVO VN |
Models from 1995
1995 VOLVO VN |
Models from 1994
1994 VOLVO VN |
Field Service Bulletin Trucks Volvo Trucks North America Greensboro, NC USA Date Group No. Release Page 4.2012 357 002 01 1( 2 ) Light Control Module (LCM), Reprogramming SB-10044250-1143 VN, VHD, VT, VAH FSB 357-002, Light Control Module (LCM), Reprogramming (April 2012) On some Volvo units equipped with clear LED clearance lights in the sun visor, they may exhibit an active fault code MID 216 PSID 49 FMI 5. This fault indicates a trailer marker open issue which is incorrect for the issue present on the vehicle. The issue is that the sun visor clearance lights are not drawing enough current and an active fault code is created. To resolve this issue follow the procedure below. Note: This issue may occur if replacing Amber or Clear lens in the sun visor. You must read and understand the precautions and guidelines in Service Information, group 20, "General Safety Practices, Engine" before performing this procedure. If you are not properly trained and certified in this procedure, ask your supervisor for training before you perform it. Repair 1 Perform accessory kit number 85134081 in Premium Tech Tool (PTT) service tool for the LCM. 2 Reprogram the LCM (MID 216) to the latest software. 3 Verify there are no active faults for LCM MID 216 after programming is complete. Service personnel: Please circulate, read and initial Service Manager Warranty Administrator PV729-FSB357-002 Workshop Foreman Service Technicians USA53162 Volvo Trucks North America Field Service Bulletin Date 4.2012 Group No. Release 357 002 01 Reimbursement This repair may be eligible for reimbursement if a product failure was experienced within time and mileage limits of the applicable Warranty coverage. Reimbursement is obtained via the normal claim handling process. Claim Type (used only when uploading from the Dealer Bus. Sys.) 01 Labor Code Primary Labor Code 35702-2-00 — 0.6 hrs. Causal Part 82713504 Volvo Trucks North America engages in a comprehensive program of testing and evaluating to provide the best possible product. Volvo Trucks North America however, is not committed to, or liable for updating existing vehicles. Page 2( 2 )