S-SB-0005-15
Service Bulletin Details
Public Details for: S-SB-0005-15
Ssb: the procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable repair manual for vehicle specific repair procedures and parts.
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 -
Models from 2016
2016 SCION FR-S |
2016 SCION IA |
2016 SCION IM |
2016 SCION TC |
Models from 2015
2015 SCION FR-S |
2015 SCION IQ |
2015 SCION TC |
2015 SCION XB |
Models from 2012
2012 SCION IQ |
2012 SCION TC |
2012 SCION XB |
2012 SCION XD |
Models from 2011
2011 SCION TC |
2011 SCION XB |
2011 SCION XD |
Models from 2010
2010 SCION TC |
2010 SCION XB |
2010 SCION XD |
Models from 2009
2009 SCION TC |
2009 SCION XB |
2009 SCION XD |
Models from 2008
2008 SCION TC |
2008 SCION XB |
2008 SCION XD |
Models from 2007
2007 SCION TC |
2007 SCION XB |
Models from 2006
2006 SCION TC |
2006 SCION XA |
2006 SCION XB |
Models from 2005
2005 SCION TC |
2005 SCION XA |
2005 SCION XB |
Models from 2004
2004 SCION XA |
2004 SCION XB |
May 13, 2015 S-SB-0005-15 A/C System Diagnosis After Component Failure Service Category Vehicle Interior Section Heating/Air Conditioning Market USA Applicability YEAR(S) MODEL(S) 2004 – 2016 FR-S, iA, iM, iQ, iQ EV, tC, xA, xB, xD ADDITIONAL INFORMATION Introduction The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Repair Procedure 1. After all proper service procedures have been followed, check for potential contamination by disassembling the system in the following locations: A. Check the A/C compressor for debris. • If NO debris is found in the inlet or outlet lines, go to step 3 and replace Parts Group B. • If debris is found in BOTH the compressor inlet and outlet lines at the A/C compressor, go to step 2 and replace Parts Group A. • If debris is found only in the compressor outlet, go to step 1B. B. Remove the receiver/drier filter and check for debris. • If debris is NOT found, go to step 4 and replace Parts Group C. • If debris IS found, go to step 1C. C. Remove the expansion valve and check for debris. • If NO debris is present, go to step 5 and replace Parts Group D. • If debris IS present, go to step 2 and replace Parts Group A. © 2015 Toyota Motor Sales, USA Page 1 of 2 S-SB-0005-15 May 13, 2015 Page 2 of 2 A/C System Diagnosis After Component Failure Repair Procedure (Continued) 2. Replace the following A/C system components (Parts Group A): • Compressor • Evaporator • Condenser • Expansion Valve • All A/C Lines 3. Replace the A/C Compressor (Parts Group B). 4. Replace the following A/C system components (Parts Group C): • Compressor • Discharge Hose • Condenser 5. Replace the following A/C system components (Parts Group D): • Condenser • Discharge Hose • High Side Hose • Compressor 6. After the repair has been completed, using the vehicle specific Repair Manual, verify the A/C system operates properly. © 2015 Toyota Motor Sales, USA