NTB18-017a

Service Bulletin Details

Public Details for: NTB18-017a

Nissan; service information for dtcs B2EF0 and B130C this bulletin applies only to vehicles equipped with telematics. This bulletin has been amended. Applied vehicles was updated and a dtc listed in the service information was correct

- 2018 - 2017 - 2016 -

Models from 2018

2018 NISSAN PATHFINDER

Models from 2017

2017 NISSAN PATHFINDER

Models from 2016

Classification:
Reference:
EL18-003a
Date:
NTB18-017a
March 26, 2018
NISSAN; SERVICE INFORMATION
FOR DTCS B2EF0 AND B130C
This bulletin has been amended. APPLIED VEHICLES was updated and a DTC listed in the
SERVICE INFORMATION was corrected. No other changes have been made.
Discard all previous versions of this bulletin.
2017-2018 Pathfinder (R52)
APPLIED VEHICLES: 2016-2018 Altima (L33)
2018 Armada (Y62)
2016-2018 Rogue (T32)
2017-2018 GT-R (R35)
2017 Rogue Hybrid (T32)
2016-2018 Maxima (A36) 2017-2018 Rogue Sport (J11)
2017-2018 Murano (Z52) 2016-2018 Sentra (B17)
2018 LEAF (ZE1)
2016-2018 Titan and Titan XD (A61)
Vehicles equipped with Telematics
APPLIED SYSTEM:
SERVICE INFORMATION
Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may
be missing or incorrect:

B2EF0 – INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD)

B130C – TCU (Telematics Control Unit) PAIRING ERROR
If one of these DTCs is stored, follow the steps on the next page along with the Electronic
Service Manual (ESM) to compete the required repairs.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
DTC B2EF0 – INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD):
1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal
battery).

2018 LEAF only: Put the vehicle in Ready to Drive mode (depress the brake
pedal and depress the power [“ignition”] switch) for 30 minutes.
2. Verify the DTC can be erased.
3. If the DTC will not erase, replace the TCU.
DTC B130C:
1. Collect all keys, and then re-register them to the vehicle.
2. Verify the DTC can be erased.
3. If the DTC will not erase, replace the TCU.
NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date.
CLAIMS INFORMATION
Refer to the current Nissan Warranty Flat Rate Manual and submit a claim for the repairs
performed.
2/2
NTB18-017a