651009

Page 1 of 3
SI B65 10 09
Audio, Navigation, Monitors, Alarms, SRS
January 2015
Technical Service
This Service Information bulletin supersedes SI B65 10 09 dated March 2013.
designates changes to this revision
SUBJECT
CIC head unit: Vehicle Position Is Missing or Incorrect on Navigation Map
MODEL
.
E60 (5 Series Sedan)
E61 (5 Series Sports Wagon)
E63 (6 Series Coupe)
E64 (6 Series Convertible)
E70 (X5)
E71 (X6)
E72 (X6 ActiveHybrid)
E82 (1 Series Coupe)
E84 (X1)
E88 (1 Series Convertible)
E89 (Z4)
E90 (3 Series Sedan)
E91 (3 Series Sports Wagon)
E92 (3 Series Coupe)
E93 (3 Series Convertible)
F01 (7 Series Sedan)
F02 (7 Series Sedan)
F02H (7 Series ActiveHybrid)
F04H (7 Series ActiveHybrid)
F06 (6 Series Gran Coupe)
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/20560.1.B651009.... 3/2/2015
Page 2 of 3
F07 (5 Series Gran Turismo)
F10 (5 Series Sedan)
F10H (5 Series ActiveHybrid)
F12 (6 Series Convertible)
F13 (6 Series Coupe)
F25 (X3)
F30 (3 Series Sedan)
F30H (3 Series ActiveHybrid)
Vehicles with option 609 (Navigation System Professional, CIC)
SITUATION
The vehicle position is missing or incorrect on the navigation map.
CAUSE
The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
CORRECTION
Recalibrate the CIC navigation system.
PROCEDURE
Do not replace parts!
Refer to the attachment.
NOTE: Before returning the vehicle to the customer, perform a “calibration drive” for 15 minutes at a
minimum speed of 30 mph.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle/SAV Limited Warranty.
Defect Code:
65 12 65 02 00
Labor Operation:
Labor Allowance:
Description:
00 00 006
Refer to KSD2
Performing “vehicle test” (with vehicle
diagnosis system – checking faults)
Refer to KSD2
Connect an approved battery
charger/power supply (indicated in
KSD2 as “Charging battery”)
5 FRU
Work time to check CIC head unit for
function including the “calibration
drive”
And:
61 21 528
And:
65 99 000
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/20560.1.B651009.... 3/2/2015
Page 3 of 3
Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair,
use the Plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of
the last 7 digits of the Vehicle Identification Number (VIN). Click on the “Search” button, and then enter the
applicable flat rate labor operation in the FR code field.
Even though work time labor operation code 65 99 000 ends in “000,” it is not considered a Main labor operation.
Also, since the “work time” FRU allowance to be claimed is specified, a separate punch time is not required.
ATTACHMENTS
View PDF attachment B651009_Attachment.
[ Copyright ©2015 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/20560.1.B651009.... 3/2/2015