2058173/2

Technical product information
Electrical switch replacement guidelines
Russische Föderation (5RU),Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing
(6796),Germany E02 Bentley rest Europe (6E02),Japan E03 Bentley Japan (6E03),Korea, (South) E08 Bentley South Korea
(6E08),United Arab Emirates E06 Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States
E05 Bentley USA and rest America (6E05)
Bentley
Topic
Market
area
Brand
Transaction 2058173/2
No.
Level
EH
Status
Approval
Release
date
New customer code
Object of complaint
electrical power, electric system, data transfer -> power supply
vehicle service -> vehicle diagnosis -> guided fault finding
vehicle service -> vehicle diagnosis -> guided fault finding
whole vehicle -> vehicle areas
electrical power, electric system, data transfer -> power supply
Complaint type
Position
functionality
control units, services -> with event log entry
control units, services -> without event log entry
high-volume parts
electrics
Vehicle data
All models
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Documents
Document name
master.xml
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Technical product information
Electrical switch replacement guidelines
Transaction No.: 2058173/2
Customer statement / workshop findings
Electrical switch suspected as defective
This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular
the airbag system
Technical background
Prior to replacing an electrical switch refer to the Measure section of this TPI
Production change
Not applicable
Measure
1) Confirm the switch is not functioning correctly when fitted in location
•
Check for spilt drinks/substances on or around the switch
•
Check and confirm that there is no evidence of damage to the switch
•
Record a clear video of the switch sticking/not functioning when fitted in location
2) Disconnect the 12 volt battery Rep.Gr 27 - Disconnect the electrical connection(s) to the switch
3) Remove the switch from its location
•
Record a clear video of the switch sticking/not functioning (Away from its fitting location)
4) Reconnect the electrical switch – Connect the 12 volt battery Rep.Gr 27
5) Check the operation of the switch whilst free from its original fitting location
•
Record a clear video of the switch sticking/not functioning (Away from location - with the electrical switch reconnected)
6) Check the switch aperture for abnormalities or damage
IMPORTANT NOTE: In the event the switch is deemed to be faulty after steps 1 through to 6 were conducted (including video evidence
showing the switch to be at fault) - The switch should be replaced, please ensure the requested videos are attached to a new or existing DISS
query
Warranty accounting instructions
In the event that the switch is deemed to be faulty due to an issue caused by the customer for example - spilt drinks/substances or food, the
switch must be replaced however this cannot be replaced under Warranty
Should the switch be replaced due to a genuine/actual fault, Warranty payment will not be approved or the payment will be cancelled in the event
that the videos are not provided within a new or existing DISS query
Parts information
Refer to the ETKA parts catalogue