ITB13002A
Service Bulletin Details
Public Details for: ITB13002A
Service information dtc B2190 (nats antenna amp) can be stored for the following reasons: 1. Something other than an intelligent key is inserted into the key-slot. 2. An intelligent key issue. 3. A wiring issue between the key-slot and th
- 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2015
2015 INFINITI Q50 |
2015 INFINITI Q60 |
2015 INFINITI Q70 |
2015 INFINITI QX50 |
2015 INFINITI QX60 |
2015 INFINITI QX70 |
2015 INFINITI QX80 |
Models from 2014
2014 INFINITI Q50 |
2014 INFINITI Q60 |
2014 INFINITI Q70 |
2014 INFINITI QX50 |
2014 INFINITI QX60 |
2014 INFINITI QX70 |
2014 INFINITI QX80 |
Models from 2011
2011 INFINITI EX35 |
2011 INFINITI G37 |
2011 INFINITI QX56 |
Models from 2009
2009 INFINITI EX35 |
2009 INFINITI G37 |
2009 INFINITI QX56 |
Models from 2007
2007 INFINITI G35 |
Classification: Reference: Date: EL13-005a ITB13-002a January 15, 2015 INTELLIGENT KEY WARNING LAMP ON, WITH DTC B2190 The Title of this bulletin has been amended. Please discard previous versions. APPLIED VEHICLES: All Infiniti equipped with a Key-Slot for an Intelligent Key SERVICE INFORMATION DTC B2190 (NATS ANTENNA AMP) can be stored for the following reasons: 1. Something other than an Intelligent Key is inserted into the Key-Slot. 2. An Intelligent Key issue. 3. A wiring issue between the Key-Slot and the BCM. 4. A Key-Slot issue. If DTC B2190 is stored due to 1 or 2 above, it will not erase or go to “PAST”, until a known good registered Intelligent Key is inserted into the Key-Slot. For DTC B2190 diagnosis; first perform the Service Manual DTC Confirmation Procedure. Service Manual DTC CONFIRMATION PROCEDURE for DTC B2190 1.PERFORM DTC CONFIRMATION PROCEDURE 1 1. Insert Intelligent Key into the key slot. 2. Check “Self-diagnostic result” using CONSULT-III plus. Make sure to use a known good registered Intelligent Key Is DTC detected? YES >> Go to "Diagnosis Procedure" – in the Service Manual. NO >> GO TO 2. 2.PERFORM DTC CONFIRMATION PROCEDURE 2 1. Press the push-button ignition switch. 2. Check “Self-diagnostic result” using CONSULT-III plus. Is DTC detected? YES >> Go to "Diagnosis Procedure" – in the Service Manual. NO >> INSPECTION END Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this applies to your vehicle. 1/1