ITB09041A
Service Bulletin Details
Public Details for: ITB09041A
If you confirm a refrigerant leak at a refrigerant pipe/hose joint location, actions 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. Note: do not replace a refrigerant pipe, hose, or other a/c compon
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 -
Models from 2016
2016 INFINITI Q50 |
2016 INFINITI Q70 |
2016 INFINITI QX50 |
2016 INFINITI QX60 |
2016 INFINITI QX70 |
2016 INFINITI QX80 |
Models from 2015
2015 INFINITI Q40 |
2015 INFINITI Q50 |
2015 INFINITI Q60 |
2015 INFINITI Q70 |
2015 INFINITI QX50 |
2015 INFINITI QX60 |
2015 INFINITI QX70 |
2015 INFINITI QX80 |
Models from 2014
2014 INFINITI Q50 |
2014 INFINITI Q60 |
2014 INFINITI Q70 |
2014 INFINITI QX50 |
2014 INFINITI QX60 |
2014 INFINITI QX70 |
2014 INFINITI QX80 |
Models from 2011
2011 INFINITI EX35 |
2011 INFINITI G37 |
2011 INFINITI QX56 |
Models from 2008
2008 INFINITI EX35 |
2008 INFINITI G35 |
2008 INFINITI G37 |
2008 INFINITI M45 |
2008 INFINITI QX56 |
Models from 2007
2007 INFINITI G35 |
2007 INFINITI M45 |
2007 INFINITI QX56 |
Models from 2005
2005 INFINITI G35 |
2005 INFINITI Q45 |
2005 INFINITI QX56 |
Models from 2004
2004 INFINITI G35 |
2004 INFINITI I35 |
2004 INFINITI M45 |
2004 INFINITI Q45 |
2004 INFINITI QX56 |
Classification: Reference: Date: HA09-004a ITB09-041a April 18, 2016 A/C SYSTEM O-RING SEAL LEAKS This bulletin has been amended. The publication date has been updated to include current models. Please discard previous versions of this bulletin. APPLIED VEHICLES: All Infiniti vehicles with A/C system IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location. NOTE: Follow the leak detection information in the Electronic Service Manual to determine the source of refrigerant leaks. ACTIONS NOTE: The O-ring seal is the most common cause of a refrigerant leak at an A/C joint. 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. CAUTION: When replacing O-ring seals, use lint-free gloves. Make sure no foreign material is introduced into the system when the joint is open. Apply A/C oil to the O-ring before installation. After recharging the system, recheck for leaks. PARTS INFORMATION Reference an electronic parts catalog (FAST or equivalent) for any needed parts. CLAIMS INFORMATION Reference the current Infiniti Warranty Flat Rate Manual and use the correct coding for repairs performed. Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to determine if this applies to your vehicle. 1/1