KC-395
Service Bulletin Details
Public Details for: KC-395
Instrument cluster programming - programming fails or errors display when replacing an instrument cluster with a newer part number (conversion kit) - us04 to us10 chassis (9-pin diagnostic connector)
- 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -
Models from 2010
2010 VOLVO VAH |
2010 VOLVO VHD |
2010 VOLVO VN |
Models from 2009
2009 VOLVO VAH |
2009 VOLVO VHD |
2009 VOLVO VN |
Models from 2008
2008 VOLVO VAH |
2008 VOLVO VHD |
2008 VOLVO VN |
Models from 2007
2007 VOLVO VAH |
2007 VOLVO VHD |
2007 VOLVO VN |
Models from 2006
2006 VOLVO VHD |
2006 VOLVO VN |
Models from 2005
2005 VOLVO VHD |
2005 VOLVO VN |
Models from 2004
2004 VOLVO VHD |
2004 VOLVO VN |
Models from 2003
2003 VOLVO VHD |
2003 VOLVO VN |
3/1/23, 10:34 AM Article Instrument Cluster Programming - Programming Fails Or Errors Display When Replacing An Instrument Cluster With A Newer Part Number (Conversion Kit) - US04 To US10 Chassis (9Pin Diagnostic Connector) Internal Content CREATED BY: RU4469V CREATED: Jan 05, 2018, 07:59PM LAST CHANGED BY: RU4469V LAST CHANGED: Feb 14, 2020, 06:26PM To program a Conversion Kit and update Central Systems with proper part information: 1. Check the part number of the original Module, and the Module being installed. Make note of both numbers. - Obtain part numbers from the label on the Modules. Do not use numbers from product packaging for reference. - Verify that the new Module is compatible with the chassis. 2. In PTT, go to the Program tab. Select 1700-22-03-04 - Conversion Kit. Press the Start button in the lower right-hand corner of the screen to start the operation. ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 1/7 3/1/23, 10:34 AM Article 3. Press the Play button in the upper left-hand corner of the screen. The Conditions window will open. Ensure that both conditions are met and check the boxes. 4. A list of all Conversion Kits available will open. Find the available kits for Information Display. The part number of the Module currently installed should appear next to the section header. - NOTE: If there are no Conversion Kits displayed for the Module, power, ground, and data links will need to be checked to ensure a communication or power supply issue is not preventing programming. ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 2/7 3/1/23, 10:34 AM Article 5. Refer to the new Module part number. Each Conversion Kit listed will need to be run one at a time starting from the lowest part number, up to but not past the part number of the new Module. - DO NOT go straight to the conversion kit that matches the part number. Older kits must be run FIRST. - NOTE: If the new Module has a part number that is not shown on the list, run the Conversion Kits up to the closest number to but lower than the new Module part number. Contact Tech Support through eService for the part number to be updated in Central Systems once conversion kits have been run. Required information for the eService case can be found at the end of this solution. A. Select the first Kit on the list. Click Okay. ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 3/7 3/1/23, 10:34 AM Article B. An alert will open advising that the Kit is ordered and VDA updated. Click OK C. Wait for all steps to complete. It may take several minutes for the "Saving to job card" step to complete the first time through. D. Once the operation completes, press the Play button again. Repeat steps A and B as necessary. i. Once a kit has been run, the current part number will be updated and the previously run kit will no longer be present on the list. ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 4/7 3/1/23, 10:34 AM Article E. DO NOT RUN ANY KITS PAST THE PART NUMBER BEING INSTALLED. 6. Once all of the necessary kits have been run, exit the operation. Refresh product data. 7. Program the Module as normal. NOTE: It may be necessary for direct changes to be made once all available Conversion Kits are run if programming still will not complete. Swapping a Standard ( MPH ) Module to a Metric ( KPH ) Module is a common example of this. If programming will not complete after all Conversion Kits have been run: • Start an eService case. • In the case, provide: - The new Module part number - The old Module part number - Advise that Conversion Kits have been run. - Provide a screenshot (preferred) or a complete description of the error code observed when programming. Tags k41105570 mack volvo Categories Volvo > US07 > VHD > Control Systems (ECUs) > ICM - Instrument Cluster Module ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 5/7 3/1/23, 10:34 AM Article Volvo > US07 > VNL > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US07 > VNM > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US07 > VT > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US10 > VHD > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US10 > VNL > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US10 > VNM > Control Systems (ECUs) > ICM - Instrument Cluster Module Volvo > US10 > VAH > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US07 > GU > Control Systems (ECUs) Mack > US07 > CXU/CHU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US07 > GU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US07 > LEU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US07 > MRU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US07 > TD > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US10 > CXU/CHU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US10 > GU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US10 > LEU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US10 > MRU > Control Systems (ECUs) > ICM - Instrument Cluster Module Mack > US10 > TD > Control Systems (ECUs) > ICM - Instrument Cluster Module ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 6/7 3/1/23, 10:34 AM Article Volvo > US04 > VHD > Control Systems (ECUs) Volvo > US04 > VNL > Control Systems (ECUs) Volvo > US04 > VNM > Control Systems (ECUs) Related links and attachments No links or attachments available Feedback Give feedback to help improve the content of this article ; Live UI https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD4?pyActivity=%40basec… 7/7