0815223
Service Bulletin Details
Public Details for: 0815223
Fuel pump connector replacement the technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2016
2016 CHRYSLER 300 |
2016 DODGE CHALLENGER |
2016 DODGE CHARGER |
Models from 2015
2015 CHRYSLER 300 |
2015 DODGE CHALLENGER |
2015 DODGE CHARGER |
Models from 2014
2014 CHRYSLER 300 |
2014 DODGE CHALLENGER |
2014 DODGE CHARGER |
Models from 2013
2013 CHRYSLER 300 |
2013 DODGE CHALLENGER |
2013 DODGE CHARGER |
Models from 2012
2012 CHRYSLER 300 |
2012 DODGE CHALLENGER |
2012 DODGE CHARGER |
Models from 2011
2011 CHRYSLER 300 |
2011 DODGE CHALLENGER |
2011 DODGE CHARGER |
Models from 2010
2010 CHRYSLER 300 |
2010 DODGE CHALLENGER |
Technical Service Bulletin (TSB) Fuel Pump Connector Replacement REFERENCE: TSB: 08-152-23 GROUP 08 - Electrical VEHICLES AFFECTED: **2010** - 2016 (LX) Chrysler 300 2011 - 2016 (LD) Dodge Charger 2015 - 2016 (LA) Dodge Challenger **2010** - 2014 (LC) Dodge Challenger Date: June 23, 2023 REVISION: 08-032-17 MARKET APPLICABILITY: HNA HMEA □SA □IAP HEE □CH CUSTOMER SYMPTOM: The technician may experience a crank/no start after the fuel pump module was replaced. CAUSE: Updated fuel pump and connector This bulletin supersedes Technical Service Bulletin (TSB) 08-032-17, date of issue April 11, 2017, which should be removed from your files. All revisions are highlighted with **asterisks** and include additional model years, updated photos and call-outs. REPAIR SUMMARY: This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module. Old Fuel Pump Kit Part Numbers New Fuel Pump Kit Part Numbers 05136022AI 05136022AJ 68102700AB 68102700AC 68103913AC 68103913AD 68145815AB 68145815AC DISCUSSION: When replacing the fuel pump module for any reason, the revised fuel pump kit will come with an updated harness connector. The harness connector MUST be replaced, even if there are no issues with the old connector. The new pump has the electrical terminals (pins) in different locations, as shown in (**Fig. 1) , (Fig. 2) and (Fig. 3) . 08-152-23 -2- Fig. 1 Old Harness Connector (LA/LD/LX) 1 2 3 4 5 - Fuel Fuel Fuel Fuel Fuel level signal 2 level sense return level sensor signal pump ground (-) pump control output (B+) Fig. 2 Old Harness Connector (LC) 1 2 3 4 5 - Fuel level sensor signal Ground (-) Fuel level signal 2 Fuel pump ground (-) Fuel pump control output (B+) -3- 08-152-23 Fig. 3 New Harness Connector 1 2 3 4 5 - Fuel Fuel Fuel Fuel Fuel level signal 2 level sense return pump ground (-) level sensor signal pump control output (B+)** The new fuel pump module kit comes with an instruction sheet (K6855971), showing how to install the new connector. POLICY: Reimbursable within the provisions of the warranty. This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.