Ford F-650 Sd 2007

• Recall 74676 [USA]: This could result in bending of the hitch channel or the hitch could be pulled off the vehicle, increasing the risk of a crash.
  Knapheide is recalling 108 my 2006-2008 pro series truck beds equipped with an icc bumper which included a provision for a ball hitch. There may be an insufficient weld attaching the hitch channel to the supporting structure.
  knapheide will offer two remedies to its customers: (1) for those customers who do not use the hitch, the hitch will be removed from the truck bed and replaced with an icc bumper; or (2) for those customers who need a hitch, a receiver hitch assembly will be added to the existing hitch assembly and all suspect weld joints will be re welded. The recall began on august 15, 2008. Owners may contact knapheide at 1-877-473-5763.
  customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 32363 [USA]: Through normal use, the axle housing could fatigue and develop a crack which could result in a wheel end lock-up or separation, possibly resulting in a crash.
  On certain trucks built with dana rear axles, the rear axle may have a housing that was built using steel that was thinner than specified.
  dealers will replace the axle free of charge. The recall began on june 12, 2007. Owners may contact ford at 1-800-248-0186.
  ford recall no. 07s53.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2007180 [Canada]: Other
  On certain trucks, the rear drive axle housing was manufactured with steel below the specified thickness, which could result in fatigue failure over time. If failure occurs, the outboard end of the housing could eventually separate, allowing the hub, axle shaft, and/or wheel and brake assembly to separate from the vehicle. This could cause a vehicle crash with injury or death. Correction: dealers will inspect and, if required, replace the axle assembly.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Tl* the contact owns a 2007 ford f-650. The contact stated that while driving 35 mph, the axle seized without warning. The contact was able to maintain control of the vehicle. The vehicle was not taken to the dealer. The manufacturer was made aware of the failure who did not offer any assistance since the vehicle was not included in campaign id number: 07v238000 (power train:axle assembly). The vehicle was not repaired. The vin was not available. The failure and the current mileage was 42,300.

Tl*the contact owns a 2007 ford f-650 superduty. The contact stated that an electrical fire ignited in the battery compartment. The wiring within the ecm melted down which caused the fire. The fire was put out with an extinguisher. The vehicle was towed to an authorized dealership where the dealer called the manufacturer who refused to assist in repair costs. The vehicle was repaired at that time. The current and failure mileages were 19,760.

Fuel tank defect. 2007 ford f650 xlt super duty truck. Vin # it has come to our attention that numerous truck of this description have had replacement of fuel tanks that have a design flaw. We, " aa susie's limousine and coach and carriage limousine" operate as a livery transportation provider in jacksonville florida. We transport our customers locally, intrastate and interstate as this vehicle was purchased as a bus designed by glaval. This is a concern to us regarding this matter because it is a know fact that there is a flaw in the design or operation of the fuel tanks used on this vehicle. We are requesting that the vehicle be recalled so corrections can be made by ford. We have talked to mike davidson ford in jacksonville florida and were told that they have had problems with the tanks on other trucks of the same model and have had to replace them. If this is a problem, it is a safety hazard weather operating as a cargo truck or livery transportation. *tr

Tl* the contact owns a 2007 ford f-650 sd. While driving 70 mph, the vehicle failed to accelerate when the accelerator pedal was depressed. In addition, the anti-brake system warning light illuminated. The contact mentioned that smoke fumes were seen coming from all tires. The failure recurred intermittently. The vehicle was taken to the dealer where it was diagnosed, but the cause of the failure was undetermined. The brake calibers and pads were replaced, but the remedy failed. The manufacturer was made aware of the failure. The failure mileage was 2,000.

Tl*the contact owns a 2007 ford f650. While driving 65 mph during fair weather conditions the check engine light came on and shut off. The vehicle continued to function normally. The check tran light also illuminated at a lower speeds of 45-50 mph and the vehicle shut off intermittently while driving. The vehicle was taken to several mechanics who confirmed that the failure was electrical. The manufacturer was not notified. The failure mileage was 38,000 and the current mileage was 96,000.

Common OBD-II Error Codes

• P0401 [1] Exhaust Gas Recirculation Flow Insufficient Detected
• P0402 [1] Exhaust Gas Recirculation Flow Excessive Detected
• P0404 [2] Exhaust Gas Recirculation Circuit Range/Performance
• P1335 [1] Fuel injection pump control module - CKP signal missing
• P0300 [2] Random/Multiple Cylinder Misfire Detected
• P0500 [1] Vehicle Speed Sensor "A" Malfunction
• P0503 [1] Vehicle Speed Sensor "A" Intermittent/Erratic/High
• C1175 [1] Speed Wheel Sensor LR Input Circuit Failure
• C1236 [1] Speed Wheel LR Input Signal Missing
• P0103 [1] Mass or Volume Air Flow "A" Circuit High Input
• P2138 [1] Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation
• P2139 [1] Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation
• P2140 [1] Throttle/Pedal Pos Sensor/Switch E / F Voltage Correlation
• P2263 [1] Turbocharger/Supercharger Boost System Performance
• P0238 [1] Turbocharger Boost Sensor A Circuit High
• P0299 [1] Turbocharger/Supercharger "A" Underboost Condition
• P2262 [1] Turbocharger/Supercharger Boost Pressure Not Detected - Mechanical