2005 HYUNDAI AzeraHyundai Azera 2005

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2005 HYUNDAI Azera, manufacturered by Hyundai-kia America Technical Center Inc (hatci).

ManufacturerKnown WMI(s)Fuel Type
HYUNDAI5NM 5NP KM8 KMH 5NM
HYUNDAI VIN Decoder

Use the box here to look up VINs from HYUNDAI as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2005 HYUNDAI Azera produced?
     - The 2005 HYUNDAI Azera is produced in Superior Township Mi, United States (usa).
  • Are there recalls for the 2005 HYUNDAI Azera?
     - There are 1 recall(s) for the 2005 HYUNDAI Azera, additional information is below.
NHTSA Mandated Recalls

  • Recall 74283 [USA]: Any of these malfunctions could lead to a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 24-BD-001H - VISIBILITY/WIPER (PWS): This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming
  • 23-EM-005H - ENGINE AND ENGINE COOLING: This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
  • 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
  • 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
  • 22-GI-006H - TIRES: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale
  • 22-EM-010H - ENGINE AND ENGINE COOLING: Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
  • 21-EM-004H - ENGINE AND ENGINE COOLING: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps
  • 21-BR-002H - BRAKES (PWS): This bulletin provides best practice recommendations when performing brake service procedures.
  • 21-EM-003H - EQUIPMENT: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
  • 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
  • 20-SS-004H - TIRES: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the a??Tire balance data sheeta?? Must be fully completed including imbalance and road for
  • 20-BD-014H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. The tsb illustrates the various causes of condensation inside the la
  • 20-SS-002H(1) - TIRES: This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
  • 20-BD-007H-1 - EQUIPMENT: This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
  • 20-EE-003H - ELECTRICAL SYSTEM: This bulletin provides information on identifying dealer stock vehicles with either: ⿢ a battery soc alert - low battery state of charge (soc) at or below 50%. ⿢ a 30 day alert - vehicle has not started and reported an soc in 30 days.
  • 20-AT-016H - POWER TRAIN: The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both oem (new) and remanufactured automatic transmissions:
  • 20-BD-007H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
  • 20-SS-001H - SUSPENSION: This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
  • 20-BE-001H - ELECTRICAL SYSTEM: This bulletin provides guidelines to inspect the usb, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common android auto and apple carplay connection conditions. 3. This bullet
  • 19-BE-011H-1 - LANE DEPARTURE: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
  • 19-GI-006H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides instruction detailing the proper methodology for scanning and uploading captured gds data files to the techline repository. Compliance with this bulletin ensures that the gds data files are correctly transferred and m
  • 19-FL-003H - POWER TRAIN: This bulletin provides the procedure to write the vehicle identification number (vin) during the replacement of the engine control module (ecm) or powertrain control module (pcm). Once the vin has been programmed to the ecm/pcm, it cannot b
  • 5NP-B6E2P-10 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): "the pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm
  • TSB-09-AT-013 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: automatic transaxle range switch diagnostic trouble codes P0705 (range switch signal problems), P0707 (range switch open circuit), and P0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly op
Vehicle Documentation
[pdf] Accessories Catalog
CAR AUDIO New EN tme eu u |||
ACCESSORIES CARAUDIO 2013 CATALOGUE OF NEW PRODUCTS Transfer Multisort Elektronik This is just one of our catalogues Order other catalogues on: www.tme.EU Introduction Introduction Transfer Multisort Elektronik Sp. z o.o. ul. Ustronna 41 93-350 Ld, Polska 48 42 645 55 55 dso tme.pl tme.pl TM...
lang:en score:14 filesize: 15.53 M page_count: 54 document date: 2013-05-15

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.