22-GI-006H

GROUP
NUMBER
GENERAL
Technical Service Bulletin
SUBJECT:
DATE
22-GI-006H
MODEL(S)
July 2022
ALL
LOAD CAPACITY LABEL REQUIREMENTS FOR VEHICLE
LOADING TO COMPLY WITH FMVSS 110
This TSB revises TSB # 19-GI-002H to include additional information to the Description
section.
Description:
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a
threshold for correcting load carrying capacity information indicated on tire placards when vehicle
weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100
pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driverside B-pillar within 25mm (1 inch) of the original tire placard.
NOTE: Effective immediately, all ports will stop the installation of the Load Capacity Label when there
are no port accessories installed.
Applicable Vehicles:
All Hyundai brand vehicles that meet the additional weight criteria above.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
LOAD CAPACITY LABEL REQUIREMENTS TO COMPLY WITH FMVSS110
Parts Information:
PART NAME
Load Carrying Capacity
Reduced Label
Part #
NP070-09003
Revision 4/08
QTY
40/
Sheet
Service Procedure:
All Dealers must determine if the weight they have added in the form of a single or multiple option(s)
or accessory(s), when added to the weight of any Port installed option(s) or accessory(s), exceeds
the lesser of 1.5% of GVWR or 45.4kg (100 lbs). All Port installed or Dealer installed options must be
included in the weight analysis. If the additional weight does exceed the lesser of the indicated
thresholds, a 'Load Carrying Capacity Reduced” Label must be installed. A black, fine point, indelible
marker must be used to write by hand onto the label the reduced carrying capacity in kilograms and
pounds, which is the total weight of all the added option(s) or accessory(s).
Example:
Vehicle
Year: 2022
Model: Santa Fe
Trim: Limited
GVWR
5,512
Port Installed
Accessory Weight
Dealer Installed
Accessory Weight
Total
Accessory
Weight
1.5% of
GVWR
24 kg
(53 lbs)
15 kg
(33 lbs)
39 kg
(86 lbs)
38 kg
(84 lbs)
The added accessories weigh 39kg (86 lbs) and exceed the listed 1.5% (GVWR) threshold
of 38kg (84 lbs). Therefore, a “Load Carrying Capacity Reduced” Label must be added with
a value of 39kg (86 lbs) written with a black, fine point indelible marker. The label must be
applied within 25mm (1 inch) of the existing tire placard.
TSB #: 22-GI-006H
Page 2 of 4
SUBJECT:
SUBJECT:
LOAD CAPACITY LABEL REQUIREMENTS TO COMPLY WITH FMVSS110
1.
To determine if a “Load Carrying
Capacity Reduced” label is required go to
the following website:
HyundaiTechInfo.com.
On the left side of the screen you will find
a link to the “Accessory Part Weight
Calculation” worksheet.
Selecting this link will initiate a download
of the “Part Accessory Weight
Calculation” Excel worksheet.
2.
The downloaded sheet has an automated calculation that will determine if the vehicle
requires the “Load Carrying Capacity Reduced” Label. It will also indicate the weight to
be recorded on the label.
Example: Label Required (write both 115lbs and 52.2kg on the label)
Example: Label NOT Required
3.
Step 1: Enter GVWR
From the provided table select subject
vehicle (Model, Year, Trim). Enter the
weight below the cell labeled “Select your
Model and record in the GVWR box
BELOW (lbs.)”.
 NOTE
If the subject vehicle is not listed refer to
the VIN placard on the vehicle B-Pillar.
Record the GVWR weight rating.
TSB #: 22-GI-006H
Page 3 of 4
SUBJECT:
SUBJECT:
LOAD CAPACITY LABEL REQUIREMENTS TO COMPLY WITH FMVSS110
4.
Step 2: Entering Accessory Weights
•
Enter Port Installed Accessory
Weight from the Monroney Label
•
From the table provided add all
applicable Dealer Installed
Accessories. The weights are also
indicated on the accessory
installation instructions.
Enter the weight below the cell
labeled “Applicable Dealer Installed
Accessories (lbs.).
•
 NOTE
When Dealers add accessory(s) or option(s) before retail sale, Dealers are required
to add the weights of Port installed accessory(s) listed on the Monroney Label to the
weights of accessories added at the Dealer. The total weight of port installed
accessories will be printed in the box containing the VIN and Engine # in the lower
portion of the Monroney Label. Dealers must add the listed accessory weight
to the weights of any Dealer installed accessory(s) or option(s) to determine the total
accessory weight. If a label was already applied at the Ports containing a reduced
load carrying capacity, the Dealer may need to apply a new label to take into account
additional option(s) or accessory(s) added by the Dealer.
5.
The worksheet will indicate if a “Load
Carrying Capacity Reduced” label is
required. If the label is required the
worksheet will indicate the weight that
must be written on the label.
6.
Label must be added with the indicated
weight in lbs. written with a black, fine
point indelible marker. The label must be
applied within 25mm (1 inch) of the
existing tire placard.
Example
Example:
TSB #: 22-GI-006H
Page 4 of 4
SUBJECT: