Hyundai Excel 2001
Vehicle Details: Consumer Complaints, Service Bulletins
HYUNDAI VIN Decoder
Use the box here to look up VINs from HYUNDAI as well as other manufacturers
Frequently Asked Questions
-
Where is the 2001 HYUNDAI EXCEL produced?
- The 2001 HYUNDAI EXCEL is produced in Seoul Korea, South Korea.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 24-BD-001H - VISIBILITY/WIPER (PWS): This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming
- 23-EM-005H - ENGINE AND ENGINE COOLING: This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
- 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
- 22-GI-006H - TIRES: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale
- 22-EM-010H - ENGINE AND ENGINE COOLING: Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 21-EM-004H - EQUIPMENT: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps
- 21-BR-002H - EQUIPMENT: This bulletin provides best practice recommendations when performing brake service procedures.
- 21-EM-003H - EQUIPMENT: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 20-SS-004H - TIRES: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the a??Tire balance data sheeta?? Must be fully completed including imbalance and road for
- 20-BD-014H - EXTERIOR LIGHTING: This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. The tsb illustrates the various causes of condensation inside the la
- 20-SS-002H(1) - TIRES: This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 20-BD-007H-1 - EQUIPMENT: This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 20-EE-003H - ELECTRICAL SYSTEM: This bulletin provides information on identifying dealer stock vehicles with either: a battery soc alert - low battery state of charge (soc) at or below 50%. a 30 day alert - vehicle has not started and reported an soc in 30 days.
- 20-AT-016H - EQUIPMENT ADAPTIVE/MOBILITY: The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both oem (new) and remanufactured automatic transmissions:
- 20-BD-007H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 20-SS-001H - SUSPENSION: This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 20-BE-001H - ELECTRICAL SYSTEM: This bulletin provides guidelines to inspect the usb, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common android auto and apple carplay connection conditions. 3. This bullet
- 19-BE-011H-1 - LANE DEPARTURE: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
- 19-GI-006H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides instruction detailing the proper methodology for scanning and uploading captured gds data files to the techline repository. Compliance with this bulletin ensures that the gds data files are correctly transferred and m
- TSB-09-AT-013 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: automatic transaxle range switch diagnostic trouble codes P0705 (range switch signal problems), P0707 (range switch open circuit), and P0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly op
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| Crash | No | N | 2 Injured | None | 20020908 |
While driving at 35mph vehicle involved in a frontal collision and none of the air bags deployed on impact.All occupants in vehicle were injured.*ak
| No | No | N | None | None | 20010904 |
Transmission goes into neutral by it self when making turns and when gas is applied, engine keeps revving. Transmission kicks in gear causing a crash(a good possibility) and wheel spin when it is equipped with tcs!. Tcs does not operate. Transmission made whiney noise when it was new and contacted dealer. They say it was normal(they always do! And never try to fix the car) i believe that is to blame for the problem. Engine stalls at a stop. Transmission needs to be replaced. Many other problems involved with the car. Seats made noise when going up and down, dealer lubed it 2 times already and it's doing it again. Sunroof rattles and dealer refuse to fix.*ak
| No | No | N | None | None | 20010513 |
Safety issue,the vehicle is disabled when this fuel chip fails, how can i safely pull off the freeway without causing a major accident if there is no throttle response to power my vehicle.
| No | No | N | None | None |
Rear control arm is bent, causing vehicle to sway from side to side. Dealer has repaired vehicle at owner's expense. Please provide further information.*ak