Hyundai Entourage 2006
Vehicle Details: Recalls, Investigations, Consumer Complaints, Service Bulletins
HYUNDAI VIN Decoder
Use the box here to look up VINs from HYUNDAI as well as other manufacturers
Frequently Asked Questions
-
Where is the 2006 HYUNDAI Entourage produced?
- The 2006 HYUNDAI Entourage is produced in Superior Township Michigan, United States (usa).
-
Are there recalls for the 2006 HYUNDAI Entourage?
- There are 2 recall(s) for the 2006 HYUNDAI Entourage, additional information is below.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 24-BD-001H - VISIBILITY/WIPER (PWS): This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming
- 23-EM-005H - ENGINE AND ENGINE COOLING: This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
- 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
- 22-GI-006H - TIRES: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale
- 22-EM-010H - ENGINE AND ENGINE COOLING: Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 21-EM-004H - ENGINE AND ENGINE COOLING: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps
- 21-BR-002H - EQUIPMENT: This bulletin provides best practice recommendations when performing brake service procedures.
- 21-EM-003H - EQUIPMENT: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 20-SS-004H - TIRES: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the a??Tire balance data sheeta?? Must be fully completed including imbalance and road for
- 20-BD-014H - EQUIPMENT: This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. The tsb illustrates the various causes of condensation inside the la
- 20-SS-002H(1) - TIRES: This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 20-BD-007H-1 - EQUIPMENT: This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 20-EE-003H - ELECTRICAL SYSTEM: This bulletin provides information on identifying dealer stock vehicles with either: a?? A battery soc alert - low battery state of charge (soc) at or below 50%. A?? A 30 day alert - vehicle has not started and reported an soc in 30 days.
- 20-AT-016H - EQUIPMENT ADAPTIVE/MOBILITY: The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both oem (new) and remanufactured automatic transmissions:
- 20-BD-007H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 20-SS-001H - SUSPENSION: This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 20-BE-001H - ELECTRICAL SYSTEM: This bulletin provides guidelines to inspect the usb, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common android auto and apple carplay connection conditions. 3. This bullet
- 19-BE-011H-1 - BACK OVER PREVENTION: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
- 19-GI-006H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides instruction detailing the proper methodology for scanning and uploading captured gds data files to the techline repository. Compliance with this bulletin ensures that the gds data files are correctly transferred and m
- 19-FL-003H - ELECTRICAL SYSTEM: This bulletin provides the procedure to write the vehicle identification number (vin) during the replacement of the engine control module (ecm) or powertrain control module (pcm). Once the vin has been programmed to the ecm/pcm, it cannot b
- 19-DS-001H-1 - WHEELS: This bulletin provides information for inspecting and replacing front or rear wheel bearing hub assemblies for any model hyundai vehicle. This procedure is applicable when there is noise such as a whirring/roaring/grinding/rumbling/etc. Tha
- TSB-14-01-002 - SUSPENSION:FRONT:CONTROL ARM:LOWER ARM: Hyundai: procedure information for preventative measure for rear crossmember and rear lower arms in applying cavity wax and undercoating. Model 2006-2008 entourage. *pe
- TSB09-FL-003-2 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: some vehicles may experience a malfunction indicator lamp illuminated with the etc (electronic throttle control) system related dtc P2135 ( forced limited power) or dtc P0638 (power management). *pe
- TSB-09-01-018 - EXTERIOR LIGHTING:TAIL LIGHTS:SWITCH: Hyundai service campaign: see document search button for owner letter. Stop lamp switch replacement (campaign 092). This bulletin describes the procedure to remove, replace, and adjust the stop lamp switch. *pe
- TSB-09-AT-013 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: automatic transaxle range switch diagnostic trouble codes P0705 (range switch signal problems), P0707 (range switch open circuit), and P0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly op
- TSB-09-FL-003-1 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: mil on dtc P2135 or P0638 or cold engine rpm fluctuation- tps replacement & ecm update. Some vehicles may experience either slight engine rpm fluctuation at cold warm up or malfunction indicator lamp illuminated with the etc (elec
- TSB-09BE001 - STRUCTURE: Hyundai: power sliding door (psd) control module replacement. Some models may exhibit a condition where a psd reopens approximately 6 in. From latch area while closing. *pe
- TSB-09-FL-003 - ENGINE AND ENGINE COOLING:ENGINE: Hyundai: some vehicles may experience a malfunction indicator lamp illuminated with the etc (electronic throttle control) system related dtc P2135 or dtc P0638. *pe
Keyfob Information
The following is a list of any known keyfobs for the HYUNDAI Entourage 2006 as well as their FCC IDs if available
- ASP-C-40-112: 2006-2010 Hyundai Entourage / HY15 / Non Transponder / Ignition Lock Cylinder / Coded / ASP-C-40-112 (ASP)
- ASP-C-40-113: 2006-2010 Hyundai Entourage / HY15 / Transponder / Ignition Lock Cylinder / Coded / ASP-C-40-113 (ASP)
Known Recall Investigations
Stop lamp switch failure investigation # PE09003
There is no summary currently available
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20121031 |
Tl* the contact owns a 2006 hyundai entourage. The contact stated that while having the vehicle inspected, it was found that all of the bushings had failed. The vehicle was taken to a dealer where no failure was found. The vehicle was not repaired. The manufacturer was contacted about the failure. The failure mileage was 50,000. ..Updated 04/18/13 *bf the consumer stated after hearing a strange creaking and clicking sound over a period of months. He took the vehicle to the dealer to have it inspected. The dealer stated there was a split in the right outer tie rod, which he authorized them to fix. However, a month later, the consumer took the vehicle back to the dealer, because the sound had returned. The technician found the frame bushing had worn out. The consumer authorized them to replace the frame bushing. While replacing the bushing, the technician noticed that the bushing had no resistance and it went it with little force. The consumer stated he continued to hear the noise, so he took the vehicle to his regular mechanic. An inspection revealed the sub-frame was damaged and there were two holes and a crack that had occurred. It was their opinion that the damage was not from natural wear and use; rather it likely occurred during the bushing replacement. Also, the vehicle had numerous electrical problems, since it was purchased. Every couple of months, the consumer would have to replace the light bulbs, because they would constantly go out. The turn signal would work sometimes and sometimes it wouldn't work. Updated 04/24/13
Common OBD-II Error Codes
- P2135 [3] Throttle/Pedal Pos Sensor/Switch A / B Voltage Correlation
- P0638 [3] Throttle Actuator Control Range/Performance (Bank 1)
- P0705 [1] Transmission Range Sensor A Circuit malfunction (PRNDL Input)
- P0707 [1] Transmission Range Sensor A Circuit Low Input
- P0708 [1] Transmission Range Sensor A Circuit High Input