Hyundai Genesis 2010

• Recall 122239 [USA]: In the event of a crash necessitating deployment of the passenger frontal air bag, the disconnected ocs would, by default, cause the first stage, and only the first stage, of the air bag to deploy, whether there is a child seat in the front seat and the bag should not deploy or if the crash is severe and both stages should deploy. either scenario increases the risk of injury to the front seat occupant.
  Hyundai motor america (hyundai) is recalling certain model year 2010-2016 genesis coupe vehicles manufactured december 12, 2008, to june 11, 2016. The electrical harness connector for the front passenger seat occupant classification system (ocs) may dislodge when the seat is moved.
  hyundai will notify owners, and dealers will secure the ocs connector to prevent it from disconnecting, free of charge. Parts are not currently available and a second letter will be sent to owners when parts are available. Owners may contact hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 151.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114772 [USA]: A following vehicle may not recognize that the vehicle is slowing or coming to a stop if the stop lamps on the vehicle do not illuminate as expected. there is an increased risk of a rear-end crash as a result.
  Hyundai motor america (hyundai) is recalling certain 2009-2011 hyundai genesis vehicles manufactured april 30, 2008, to november 21, 2010, and 2011 hyundai equus vehicles manufactured july 31, 2010, to november 21, 2010. Due to a circuit failure, the stop lamps in the affected vehicles may not illuminate.
  hyundai will notify owners, and dealers will repair the stop lamp switch circuit, free of charge. Hyundai issued an interim notification to owners on january 6, 2015. The recall began on march 23, 2015. Owners may contact hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 125.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 100057 [USA]: If the module corrodes, reduced brake effectiveness may result, increasing the risk of a crash.
  Hyundai is recalling certain model year 2009-2012 genesis vehicles manufactured april 30, 2008, through march 28, 2012. The vehicles may contain brake fluid which does not protect against corrosion of the hydraulic electronic control unit (hecu).
  hyundai will notify owners and instruct them to bring their vehicle to a dealer for service. Hyundai will inspect the hecu module for proper operation, and will replace the modules as necessary. Hyundai will replace the factory brake fluid in those vehicles that have not previously had the factory brake fluid replaced. These repairs will be done free of charge. The recall began on december 24, 2013. Owners may contact hyundai at 1-800-633-5151 or by email at [email protected]. Hyundai's recall number is 114.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 92737 [USA]: Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. additionally, when the ignition is in the 'on' position, the transmission shifter may be able to be moved out of park without first applying the brake. this may lead to unintentional movement of the car which may increase the risk of a crash.
  Hyundai motor company (hyundai) is recalling certain model year 2006-2009 accent, model year 2007-2011 azera, sonata and sante fe,2006-2011 tucson, 2009-2011 elantra touring, 2007-2010 elantra, 2008-2011 veracruz, 2009-2011 genesis, 2010-2011 genesis coupe, 2007-2008 entourage, and 2006-2008 tiburon vehicles. Originally, in april 2013, hyundai recalled 1,059,824 model year 2007-2009 accent and tucson, model year 2007-2010 elantra, model year 2007-2011 santa fe, model year 2008-2009 veracruz, model year 2010-2011 genesis coupe, and model year 2011 sonata vehicles. In september 2013, hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the park position and cause the electronic stability control (esc) malfunction light to illuminate.
  hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on april 22, 2013. Owners may contact hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2014558 [Canada]: Brakes
  On certain vehicles, a diode in the stop lamp circuit could fail, which could result in the brake lights failing to illuminate when the brake pedal is depressed, increasing the risk of a crash causing property damage and/or personal injury. Correction: dealers will repair the stop lamp switch circuit.

  Show Content

• Recall 2013376 [Canada]: Brakes
  On certain vehicles, corrosion could occur in the brake system hydraulic electronic control unit. Over time, this could affect the control unit's operation, causing a low/soft brake pedal and reduced braking effectiveness. This could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will affect repairs.

  Show Content

• Recall 2013325 [Canada]: Electrical
  On certain vehicles, the stop lamp switch may fail and cause intermittent operation of the brake lights. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing property damage and/or personal injury. Correction: dealers will replace the switch.

  Show Content

• Recall 2016508 [Canada]: Airbag
  On certain vehicles, objects or debris located under the front passenger seat could contact the electrical connector of the occupant classification system (ocs) and disconnect the connector if the seat is moved. This would disable the ocs and illuminate the instrument cluster air bag warning lamp. If the ocs is disabled, the first stage front passenger airbag would deploy in a frontal collision, regardless of the weight and size of the front passenger seat occupant. If the seat were to be occupied by a child seat or small statured occupant, it could increase the risk of injury. Additionally, this condition could cause the second stage of the frontal passenger airbag to fail to deploy during a crash, which could increase the risk of injury to the front passenger seat occupant. Correction: dealers will secure the ocs connector to prevent it from being disconnected.

  Show Content

• Recall 2013099 [Canada]: Electrical
  On certain vehicles, the stop lamp switch may fail and cause intermittent operation of the brake lights. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing property damage and/or personal injury. Correction: dealers will replace the switch.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Hyundai Genesis 2010 as well as their FCC IDs if available

• RSK-HY-2M350: 2010-2011 Hyundai Genesis Coupe / 4-Button Smart Key / PN: 95440-2M350 / SY5HMFNA04 (OEM)
  FCC ID: SY5HMFNA04
• RSK-ULK063: 2009-2014 Hyundai Genesis / 4-Button Smart Key Remote / PN: 95440-3V021 / SY5HMFNA04 (OEM Refurb)
  FCC ID: SY5HMFNA04

• Brake hydraulic control module failure investigation # PE13033

  On october 28, 2013, hyundai motor company (hyundai) submitted a defect information report (dir) to nhtsa describing a safety defect in the braking system of approximately 43,500 model year (my) 2009 through 2012 hyundai genesis sedans (nhtsa recall no. 13v-489).The hyundai report indicates that the recalled vehicles may contain brake fluid that does not sufficiently inhibit corrosion on the zinc plating of control valve armatures in the hydraulic electronic control unit (hecu) module. The dir indicated that, over time, the build-up of corrosion products may affect operation of hecu control valves, resulting in a low/soft brake pedal with reduced brake effectiveness, which may increase the risk of a crash.In october 2011, the hecu supplier notified hyundai that the brake fluid used in production plants was causing corrosion of valve armatures in the control module.The supplier changed the coating of the valve armatures in late march 2012 to correct the problem in production vehicles.Hyundais recall includes genesis vehicles produced prior to the implementation of the hecu change.In march 2013, hyundai initiated a service campaign (tl6) to replace brake fluid in the subject vehicles with brake fluid with better corrosion resistance properties.According to hyundais dir letter, after pe13-033 was opened, the company noted that some of the vehicles serviced in the tl6 campaign subsequently required hecu replacement.This was an indication that internal corrosion had progressed enough to affect valve operation and brake performance, prompting hyundai to conduct a safety recall.Hyundais repair procedures for 13v-489 require brake system flushing and replacement in all recalled vehicles with a new fluid containing the necessary corrosion inhibitor.In addition, for vehicles produced prior to june 1, 2010, dealers will perform an inspection procedure to verify that the hecu is functioning properly and replace units that do not meet the test requirements.Hyundai indicated that, based on analysis of claim data, only vehicles produced prior to june 1, 2010 have been in service long enough to require the additional inspection/replacement of the hecu. Analysis of failure data reported to nhtsa and provided by hyundai in response to odis information request letter for pe13-033 identified 756 complaints and 1,683 warranty claims for 30,114 subject vehicles produced prior to june 1, 2010, resulting in a complaint rate of 25.1 incidents per thousand vehicles (iptv) and a claim rate of 5.6 percent.The my 2009 vehicles, with the longest exposure times, experienced the highest complaint (33.5 iptv) and warranty (7.0 percent) rates.For the 45,639 subject vehicles produced after june 1, 2010, odi identified 13 complaints and 34 warranty claims, resulting in a complaint rate of 0.3 iptv and a warranty claim rate of 0.1 percent, indicating that the brake fluid corrosion concern had not progressed far enough to result in significant rates of brake system performance symptoms in those vehicles.This investigation is closed.Odi will continue to monitor complaints to evaluate the effectiveness of hyundais recall.The voqs noted in the failure report are: 10569231, 10560898, 10560495, 10559360, 10558279, 10558264, 10556964, 10556631, 10556577, 10556322, 10554988, 10554802, 10554122, 10552958, 10551817, 10551157, 10551110, 10551092, 10550791, 10550773, 10550431, 10549750, 10549634, 10549629, 10549567, 10549402, 10549376, 10549270, 10549228, 10549186, 10549021, 10548903, 10548823, 10548791, 10548737, 10548722, 10548716, 10548705, 10546565, 10544803, 10543663, 10542962, 10541959, 10541741, 10538208, 10537934, 10536652, 10535436, 10533459, 10525123, 10523412, 10514041, 10511037, 10510525, 10502374, 10499922, 10497935, 10492198, 10491494.
  

  Show Content

The vehicle brake lights stop working. The car will not start normally and will not shift normally. A fuss will fail over and over again. Hyundai dealer identified that the hecu is faulty.

Vehicle suddenly loses acceleration and drops to a maximum speed of 20 mph. Check engine light turns on but goes away after shutting down the car and leaving it on standby for a few minutes. Occurs every few hundreds miles. It's happened while the car is in motion, both on the street and highway.

Vehicle suddenly loses acceleration and drops to a maximum speed of 20 mph. Check engine light turns on but goes away after shutting down the car and leaving it on standby for a few minutes. Occurs every few hundreds miles. It's happened while the car is in motion, both on the street and highway.

Brake pedal suddenly becomes soft. Front brake pads were replaced 10/15/19. Problem corrected for three month. Pedal suddenly very soft without warning. Car will stop but not as expected. Dangerous if not anticipated. Diagnosed as hydraulic control module. Estimated cost to repair $3800.

Brake pedal suddenly becomes soft. Front brake pads were replaced 10/15/19. Problem corrected for three month. Pedal suddenly very soft without warning. Car will stop but not as expected. Dangerous if not anticipated. Diagnosed as hydraulic control module. Estimated cost to repair $3800.

While driving my genesis 2010 sedan, the battery light illuminated, then the power steering did not respond. I was about 1/2 miles from my house and i had to wrestle with my steering wheel until i got home. The scary part was that i unexpectedly lost power steering during a turn at the traffic light. Luckily, no on coming traffic was near as i completed the turn on the opposite slide of the street. I fortunately arrive home, parked the vehicle and had it towed to the mechanics. I learned that the alternator went out and so did the battery. Luckly, during the turn i did not crash, but it was very nervous the rest of the way.

I was driving in a grocery store parking lot and went over a speed bump at maybe 2 miles an hour and both my front headrest discharged.

Temporary spare has a split in the tread area. Never used. Took it out to clean trunk and noticed a flat spot on the tread and then the tear.

Driver lost control of vehicle going around curve, car turned out and slid off the road, making contact with a tree (rear of the vehicle hit the tree)

Common OBD-II Error Codes

• P2135 [1] Throttle/Pedal Pos Sensor/Switch A / B Voltage Correlation
• P0638 [1] Throttle Actuator Control Range/Performance (Bank 1)
• B2326 [1] Mirror Driver Vertical Feedback Potentiometer Circuit Short to Battery
• P0605 [1] Internal Control Module Read Only Memory (ROM) Error