Hyundai Genesis 2008
Vehicle Details: Consumer Complaints, Service Bulletins
HYUNDAI VIN Decoder
Use the box here to look up VINs from HYUNDAI as well as other manufacturers
Frequently Asked Questions
-
Where is the 2008 HYUNDAI GENESIS produced?
- The 2008 HYUNDAI GENESIS is produced in Superior Township Mi, United States (usa).
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 24-BD-001H - VISIBILITY/WIPER (PWS): This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming
- 24-FL-001G - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: This bulletin outlines the basic components of the bg fuel test kit and the procedure to test the quality of the fuel during vehicle diagnosis. Poor fuel quality may lead to cold engine startability issues, hesitation at idle or during acc
- 23-EM-005H - ENGINE AND ENGINE COOLING: This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
- 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
- 22-GI-006G - EQUIPMENT: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit
- 22-GI-006H - TIRES: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale
- 22-EM-010H - ENGINE AND ENGINE COOLING: Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 21-EM-004H - EQUIPMENT: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps
- 21-BR-002H - BRAKES (PWS): This bulletin provides best practice recommendations when performing brake service procedures.
- 21-EM-003H - EQUIPMENT: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 20-SS-004H - TIRES: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the a??Tire balance data sheeta?? Must be fully completed including imbalance and road for
- 20-BD-014H - EQUIPMENT: This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. The tsb illustrates the various causes of condensation inside the la
- 20-SS-002H(1) - TIRES: This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 20-BD-007H-1 - EQUIPMENT: This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 20-EE-003H - ELECTRICAL SYSTEM: This bulletin provides information on identifying dealer stock vehicles with either: a battery soc alert - low battery state of charge (soc) at or below 50%. a 30 day alert - vehicle has not started and reported an soc in 30 days.
- 20-AT-016H - EQUIPMENT ADAPTIVE/MOBILITY: The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both oem (new) and remanufactured automatic transmissions:
- 20-BD-007H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 20-SS-001H - SUSPENSION: This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 20-BE-001H - ELECTRICAL SYSTEM: This bulletin provides guidelines to inspect the usb, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common android auto and apple carplay connection conditions. 3. This bullet
- 19-BE-011H-1 - LANE DEPARTURE: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
- 19-GI-006H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides instruction detailing the proper methodology for scanning and uploading captured gds data files to the techline repository. Compliance with this bulletin ensures that the gds data files are correctly transferred and m
- 19-FL-003H - POWER TRAIN: This bulletin provides the procedure to write the vehicle identification number (vin) during the replacement of the engine control module (ecm) or powertrain control module (pcm). Once the vin has been programmed to the ecm/pcm, it cannot b
- TSB-13-01-014 - ELECTRICAL SYSTEM:SOFTWARE: Hyundai: on certain model vehicles, an update is required on the ecm software and procedural information is being provided. Models up to 2013 genesis. *pe
- TSB-13-01-006-1 - SERVICE BRAKES, HYDRAULIC:FLUID: Hyundai: on certain vehicles, the brake fluid needs replacing and information procedure has been provided. Models 2010-2012 vi equus, 2008-2012 bh genesis. *pe updated 9/20/13. *pe
Vehicle Documentation
 |
[pdf]
User Manual Owner's Manual Reference Guide Specifications Dimension Guide Guide Application Guide
2011 Cat Batteries Cross Reference Guide PEGP7801 06 Caterpillar Inc Users should consult the most current edition of this application guide and their owner s manual The marketer manufacturer expressly deny any responsibility for battery replacement size information from or dealer 1 cat® specifications premium high output batteries — available worldwide world toughest 100 hour vibration testing 5 times industry standard 2 general service a line designed less demanding applications † automotive light duty commercial industrial C10505677 caterpillar scene7 is content cat 80 cda files 90229 7 2011 Cat Batteries Cross Reference Guide TABLE OF CONTENTS GENERALINFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Cat Battery Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 14 Assembly Numbers, Cell Layouts and Terminals . . . . . . . . . . 5 BCI Group... lang:en score:21 filesize: 3.37 M page_count: 230 document date: 2010-12-14 |
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20171031 |
Hyundai issued a technical service bulletin for the bh genesis sedan hecu inspection and brake fluid replacement (recall 114). The dealer told me this service was performed on my car in 2014. My hecu has failed and braking is very limited. It appears that the resolution to this recall does not resolve the problem. My car is not safe to drive. Should the recall be issued again requiring replacement of the hecu?
| No | No | N | None | None | 20130113 |
Automotive safety research institute, south korea (katri), production defects is a representative survey the recall survey by referring to the contents below would be appreciated. Hyundai genesis sponge phenomena during braking and lane departure occurs 1 lane departure occurs when braking phenomenon and sponge of passenger cars produced by hyundai motor company (hmc). Sale 2 abs (anti-lock brake system, continental, mk25e) control device (modulator) corrosion occurs in some parts i stepped on the brakes normally braking delay or increase the stopping distance of the vehicle to brake jungle experience symptoms even if defects are discovered 3 abs (anti-lock brake system) module of corrosion status of a severe case of vehicles put on the brakes when the driver's intended direction and the other in the direction the vehicle is proceeding to check abs brake unit brake wheels locked to prevent a safety device for the driver's intention to proceed in one direction: 4 the investigation of the device for a vehicle abs (anti-lock brake system, continental, mk25e) deems. *tr