Hyundai Xg 2001
Vehicle Details: Recalls, Consumer Complaints, Service Bulletins
Below you will find all available information on the 2001 HYUNDAI XG.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| HYUNDAI |
HYUNDAI VIN Decoder
Use the box here to look up VINs from HYUNDAI as well as other manufacturers
Sub-models: - Xg 300 -
NHTSA Mandated Recalls
Recall R/2003/061 [UK]: Wiring connection concern in side air bag srs loom
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 24-BD-001H - VISIBILITY/WIPER (PWS): This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming
- 23-EM-005H - ENGINE AND ENGINE COOLING: This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 23-BD-007H - STRUCTURE:BODY: Hyundai applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can becom
- 23-BD-002H - VISIBILITY: This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. This tsb illustrates the various causes of condensation inside th
- 22-GI-006H - TIRES: Effective june 2, 2008, federal motor vehicle safety standard 110 (fmvss 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale
- 22-EM-010H - ENGINE AND ENGINE COOLING: Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 21-EM-004H - ENGINE AND ENGINE COOLING: This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the bearing clearance test inspection requirements to determine next required steps
- 21-BR-002H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides best practice recommendations when performing brake service procedures.
- 21-EM-003H - EQUIPMENT: This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 20-BR-002H - BRAKES (PWS): This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 20-SS-004H - TIRES: This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the a??Tire balance data sheeta?? Must be fully completed including imbalance and road for
- 20-BD-014H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (drl), or fog lamp. The tsb illustrates the various causes of condensation inside the la
- 20-SS-002H(1) - WHEELS: This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 20-BD-007H-1 - EQUIPMENT: This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 20-EE-003H - ELECTRICAL SYSTEM: This bulletin provides information on identifying dealer stock vehicles with either: a battery soc alert - low battery state of charge (soc) at or below 50%. a 30 day alert - vehicle has not started and reported an soc in 30 days.
- 20-AT-016H - POWER TRAIN: The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both oem (new) and remanufactured automatic transmissions:
- 20-BD-007H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 20-SS-001H - SUSPENSION: This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 20-BE-001H - ELECTRICAL SYSTEM: This bulletin provides guidelines to inspect the usb, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common android auto and apple carplay connection conditions. 3. This bullet
- 19-BE-011H-1 - LANE DEPARTURE: The blind spot detection (bsd) or blind-spot collision warning (bcw) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The bsd/bcw detects v
- 19-GI-006H - EQUIPMENT ADAPTIVE/MOBILITY: This bulletin provides instruction detailing the proper methodology for scanning and uploading captured gds data files to the techline repository. Compliance with this bulletin ensures that the gds data files are correctly transferred and m
- TSB-09-AT-013 - POWER TRAIN:AUTOMATIC TRANSMISSION: Hyundai: automatic transaxle range switch diagnostic trouble codes P0705 (range switch signal problems), P0707 (range switch open circuit), and P0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly op
- TSB0740010 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): Automatic transaxle harsh and/or delayed upshift or downshift - gds analysis. *pe
- 0740016 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): Automatic transaxle diagnostic trouble codes P0715, P0716, P0717, P07120, P0721 and P0722. *nj
- 034006 - POWER TRAIN:AUTOMATIC TRANSMISSION: Ata solenoid diagnostic codes P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0756, P0770. *tt
- 0140005 - ENGINE AND ENGINE COOLING:ENGINE: Automatic transaxle diagnostic trouble codes P0715, P0717, P0720, P0721, P0722. *sc
- 05400061 - ENGINE AND ENGINE COOLING:ENGINE: Ata solenoid diagnostic codes P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770. Supersedes tsb# 0540006 to include dtc descriptions in september 10. *sc updated 3/5/10. *pe
- 0550004 - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP: Abs pump self check noise. Also included: 2003-2005 model xg and 1999, 2000, 2001, 2003, 2004 and 2005 model santa fe. *sc
- 0804 - INTERIOR LIGHTING: Trip computer bulb replacement. *nm
- 0490005 - ELECTRICAL SYSTEM: Trip computer bulb replacement. *mr
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20050621 |
Dt: 2001 hyundai xg. The consumer states the vehicle has had engine troubles all summer long. The vehicle would lunge while sitting at a stop light. The timing belt has been changed twice; the engine was coughing, gagging and idling funny. Spark plugs, spark plug wires and coils were replaced to try and fix this problem. The air bag light was coming on and off. This was finally fixed when they changed the air bag sensor. *ak *nm
| No | No | N | None | None | 20040727 |
While driving consumer applied the brakes and pedal went to the floor. Consumer was able to maintain control, and drove vehicle to the dealer for inspection. Mechanic determined that master cylinder needed to be replaced. Consumer informed the mechanic that master cylinder was replaced, but the problem recurred. *ak
Common OBD-II Error Codes
- P0705 [1] Transmission Range Sensor A Circuit malfunction (PRNDL Input)
- P0707 [1] Transmission Range Sensor A Circuit Low Input
- P0708 [1] Transmission Range Sensor A Circuit High Input
- P0712 [1] Transmission Fluid Temperature Sensor A Circuit Low Input
- P0715 [2] Input/Turbine Speed Sensor A Circuit Malfunction
- P0716 [1] Input/Turbine Speed Sensor A Circuit Range/Performance
- P0717 [2] Input/Turbine Speed Sensor A Circuit No Signal
- P0721 [2] Output Speed Sensor Range/Performance
- P0722 [2] Output Speed Sensor No Signal
- P0740 [2] Torque Converter Clutch Circuit Malfunction
- P0741 [2] Torque Converter Clutch Circuit Performance or Stuck Off
- P0742 [2] Torque Converter Clutch Circuit Stock On
- P0743 [2] Torque Converter Clutch Circuit Electrical
- P0746 [2] Pressure Control Solenoid A Performance or Stuck Off
- P0748 [2] Pressure Control Solenoid A Electrical
- P0750 [2] Shift Solenoid A Malfunction
- P0755 [2] Shift Solenoid B Malfunction
- P0756 [1] Shift Solenoid B Performance or Stock Off
- P0760 [2] Shift Solenoid C Malfunction
- P0770 [2] Shift Solenoid E Malfunction
- P0720 [1] Output Speed Sensor Circuit Malfunction
- P0765 [1] Shift Solenoid D Malfunction