Hyundai Xg350 2001

• Recall 87388 [USA]: If that happens, the vehicle may lose drive power to the wheels, and the front wheel may make contact with the fender or wheel well, thereby increasing the risk of a crash.
  Hyundai is recalling 188,282 my 2001-2004 sonata and my 2001-2004 xg300 and xg350 vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia. Road salt applied in these jurisdictions during the winter months may result in progressive, internal corrosion of the front sub-frame on the vehicles, and may result in thinning or perforation of the sub-frame steel. The corrosion is frequently visible and often discovered during inspection or routine maintenance, and owners may also hear noises or notice tire misalignment and steering pull. If these signals are undetected or unheeded, the corrosion may progress and the forward mounting of the lower control arm may detach from the sub-frame.
  dealers will measure the thickness of the front sub-frame and inspect the front sub-frame for corrosion damage and, if necessary, the front sub-frame will be replaced with a new sub-frame that incorporates additional holes in the upper and lower panels. If the front sub-frame does not require replacement, the dealer will add drainage holes to the sub-frame and will treat the sub-frame with rust-proofing material to stop the corrosion process. This procedure will be performed free of charge. The recall is expected to begin during april 2009. Owners may contact the hyundai customer assistance center at 1-800-633-5151.
  hyundai recall no. 089.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2009123 [Canada]: Structure
  On certain vehicles operated in areas of heavy road salt usage (ontario, quebec, new brunswick, nova scotia, prince edward island, and newfoundland & labrador), road salt can collect in the rear portion of the side members of the subframe and may result in internal corrosion leading to thinning or perforation of the subframe steel. The corrosion may ultimately lead to separation of the lower control arm at the forward mounting point to the subframe. When separation occurs, in most cases, the movement of the arm will cause the axle to pull out of the transaxle and the vehicle will no longer have drive power to the wheels. In extreme cases, the wheel can also rotate off its designed axis and make contact with the fender or the wheel well. Both outcomes could result in a loss of vehicle control and a crash causing property damage, personal injury or death. Correction: dealers will inspect and, if necessary, replace the front subframe assembly. Should the subframe not require replacement, drainage holes will be added, as well as treatment with rust-proofing material to arrest the corrosion process.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Tl*the contact owns a 2001 hyundai xg300. The contact stated there is corrosion on the sub frame. This results from perforation of the sub frame. He contacted the manufacture and was told his vehicle is not under a recall. The failure mileage is 173,000.

My 2001 hyundai xg350l was involved in a side accident and the side airbag did not deploy. This car had been to the dealer months ago subject to a recall to fix something defective on the side air bag. I have found no way to send this information to hyundai on their website. *jb

While driving at any speed vehicle will shut off. Also, everything else in vehicle shut down. Vehicle will stay off for up to 4 hours. Contacted dealer, and dealer could not find what was caus eof problem. *ak

Common OBD-II Error Codes

• P0740 [1] Torque Converter Clutch Circuit Malfunction
• P0741 [1] Torque Converter Clutch Circuit Performance or Stuck Off
• P0742 [1] Torque Converter Clutch Circuit Stock On
• P0743 [1] Torque Converter Clutch Circuit Electrical
• P0746 [1] Pressure Control Solenoid A Performance or Stuck Off
• P0748 [1] Pressure Control Solenoid A Electrical
• P0750 [1] Shift Solenoid A Malfunction
• P0755 [1] Shift Solenoid B Malfunction
• P0760 [1] Shift Solenoid C Malfunction
• P0765 [1] Shift Solenoid D Malfunction
• P0770 [1] Shift Solenoid E Malfunction
• P0705 [1] Transmission Range Sensor A Circuit malfunction (PRNDL Input)
• P0707 [1] Transmission Range Sensor A Circuit Low Input
• P0708 [1] Transmission Range Sensor A Circuit High Input
• P1159 [1] Bank 2 Fuel Control Shifted Rich
• P0171 [1] System too Lean (Bank 1)
• P0174 [1] System too Lean (Bank 2)
• P1118 [1] IAT Sensor Open/Short
• P1178 [1] Rotor Calibration Fault
• P0711 [1] Transmission Fluid Temperature Sensor A Circuit Range/Performance
• P0712 [1] Transmission Fluid Temperature Sensor A Circuit Low Input
• P0713 [1] Transmission Fluid Temperature Sensor A Circuit High Input
• P0885 [1] TCM Power Relay Control Circuit/Open
• P1723 [2] SSD Inductive Signature Malfunction
• P0139 [1] 02 Sensor Circuit Slow Response (Bank 1 Sensor 2)
• P0159 [1] 02 Sensor Circuit Slow Response (Bank 2 Sensor 2)
• P1151 [1] Fuel Restriction Indicator Circuit Malfunction