Isuzu H-series 2005
Vehicle Details: Decoded VIN Details, Service Bulletins
ISUZU VIN Decoder
Use the box here to look up VINs from ISUZU as well as other manufacturers
Frequently Asked Questions
-
Where is the 2005 ISUZU H-SERIES produced?
- The 2005 ISUZU H-SERIES is produced in Flint Michigan, United States (usa).
-
What is the GVWR of a 2005 ISUZU H-SERIES?
- The 2005 ISUZU H-SERIES has a GVWR of Class 6: 19,501 - 26,000 lb (8,845 - 11,794 kg) lbs.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
- WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
- IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
- WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- IB09-X-004C - ENGINE AND ENGINE COOLING: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
- IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
- IB12-J-003E - FUEL SYSTEM, GASOLINE: Proper installation of the fuel injector pipes into a long block assembly the fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, foll
- IB19R001 - ENGINE AND ENGINE COOLING: Isuzu provides optional engine block heaters and oil pan heaters which are designed to warm the engine coolant and engine oil enough during extreme cold temperatures to allow easy starting. Oil gets thicker (more viscous) as it gets colder
- IB19X004 - EQUIPMENT: California law requires that a proff of correction certificate ("poc certificate") be completed for every motor vehicle emissions campaign/recall (if any) that is applicable to a motor vehicle in order for that vehicle to be registered in t
- PIC5260C - VISIBILITY:SUN/MOON ROOF ASSEMBLY: This preliminary information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
- PIP4925B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
- PIP5540D - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
- PIP5628 - ENGINE AND ENGINE COOLING: This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
- 05-06-04-035D - FUEL SYSTEM, GASOLINE: This informational bulletin provides the technician with information on what e85 fuel may due to a non e85 vehicle.
- 00-06-01-012G - ENGINE (PWS): This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on engine surfaces.
- PIP5232 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This preliminary information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspe
- PIC5088E - EQUIPMENT: This preliminary information communication provides information to the technician about vehicles that may not receiving all channels on the xm band. Technician will need to use a scan tool and verify current digital radio receiver status un
- PIC3100F - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: This preliminary information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held gps unit to test the odomete
- PIP5232B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This preliminary information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspe
- PIT5399 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about connectivity concerns when connecting an apple device via usb cord. Technician should insure the customer is using an original equipment manufacturer ap
- PIC4310L - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
- PIC5953A - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
- PIT3271G - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
- PIC3278F - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
- PIC4310K - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
- PIT3173C - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correc
- PIC4310H - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
- PIT4907A - BRAKES (PWS): This preliminary information communication provides information to the technician about brake rotors on new vehicles and replacement parts from general motors service parts operations. Technician should be advised the costing should not be
- PIC4935D - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar
- PIP5163 - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
- PIT3099M - EQUIPMENT ADAPTIVE/MOBILITY: This preliminary information communication provides information to the technician about installing general motors accessory pats. Technician can check service information for some accessories. Technician can also contact partect for assista
- PIC5959B - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about vehicle that has no xm audio on certain channels but xm channel info is displayed. Technician will need to contact xm and deactivate and activate the mo
- PIC4310J - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
- PIC5953 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
- PIP5029G - ENGINE (PWS): This preliminary information communication provides information to the technician about vehicles that have a malfunction indicator lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need
- PIP5226A - EQUIPMENT: This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
- PIC3278F - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
- IB-12-J-003-B - ENGINE (PWS): Isuzu: information concerning the installation of the fuel injector pipes into a long block assembly. 1999 - 2002 isuzu fsr/ftr/fvr, 1999 - 2009 chevrolet or gmc t6500/t7500/t8500, 2000 - 2004 chevrolet or gmc wt5500, 2000 - 2004 isuzu frr,
- CB-13-J-001-A - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Isuzu: see document search button for owner letter. Some vehicles will develop a crack, over time, in the exhaust manifold resulting in increased noise during operation. Models 2004-09 ftr/fvr/fxr, 2004-09 c/t series, 2005-07 h series.
- SB-12-J-005 - FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL: Isuzu (chevrolet/gmc): trucks with diesel engine would have idle vibration, trouble starting, engine not revving up, and a lack of power due to possible operation condition of suction control valve (scv)/fuel rail pressure (frp) regulator
- CB-10-X-001 - EQUIPMENT:OTHER:LABELS: Isuzu service campaign: see document search button for owner letter. The emissions label was installed incorrectly so it cannot be seen. 2005-2007 h series. *rm
- CB-10X001 - EQUIPMENT:OTHER:LABELS: Isuzu service campaign: see document search button for owner letter. Voluntary emission supplemental label recall. Vehicles were built with the engine emission label installed in a location that is visually obstructed by the air cleaner.
- IB-10-X-002 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Isuzu truck: instrument panel cluster exchange procedure when replacement is necessary. Follow diagnostic and repair information found in the intstrument panel gauges and console sub section of service information. If diagnosis points to
- SB08-C-002 - STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS: Passenger side front outside door handle inoperative (replace outside door handle). *nj
NHTSA decoded information from VIN
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Axles | 2 |
Body Cab Type | MDHD: Conventional |
Body Class | Truck |
Brake System Type | Hydraulic |
DisplacementCC | 7800.0 |
DisplacementCI | 475.98520393891 |
DisplacementL | 7.8 |
Drive Type | 4x2 |
Engine Configuration | In-Line |
Engine Cylinders | 6 |
Engine Manufacturer | Duramax |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Diesel |
GVWR | Class 6: 19,501 - 26,000 lb (8,845 - 11,794 kg) |
Make | ISUZU |
MakeID | 542 |
Manufacturer | GENERAL MOTORS LLC |
Manufacturer Id | 984 |
Model | H-Series |
ModelID | 14204 |
Model Year | 2005 |
NCSA Body Type | Single-unit straight truck or Cab-Chassis (GVWR range 19,501 to 26,000 lbs.) |
NCSA Make | Isuzu |
NCSA Model | Medium/Heavy – CBE |
Other Engine Info | Turbo Intercooler. |
Plant City | FLINT |
Plant Country | UNITED STATES (USA) |
Plant State | MICHIGAN |
Series | H6500 |
Turbo | Yes |
VIN | 4GTJ6C1325F700568 |
Vehicle Descriptor | 4GTJ6C13*5F |
Vehicle Type | TRUCK |
Latest VINs Decoded for this Manufacturer
VIN | Year | Model | Manufactured In |
---|---|---|---|
4GTM7C1345F700615 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTJ6C1325F700568 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTJ7C1305F700579 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTJ7C1375F700854 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTM7C1385F700570 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTJ6C1375F700596 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |
4GTJ6C13X5F700639 | 2005 | H-Series | FLINT MICHIGAN, UNITED STATES (USA) |