2015 KENWORTH T800Kenworth T800 2015

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2015 KENWORTH T800, manufacturered by Kenworth Truck Company.

ManufacturerKnown WMI(s)Fuel Type
KENWORTH1NK 3WM SFN 2XK
KENWORTH VIN Decoder

Use the box here to look up VINs from KENWORTH as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2015 KENWORTH T800 produced?
     - The 2015 KENWORTH T800 is produced in Kirkland Wa, United States (usa).
  • Are there recalls for the 2015 KENWORTH T800?
     - There are 21 recall(s) for the 2015 KENWORTH T800, additional information is below.
NHTSA Mandated Recalls
  • Recall 250695 [USA]: Insufficient air volume can reduce braking performance and increase the risk of a crash.

  • Recall 146500 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.

  • Recall 128610 [USA]: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.

  • Recall 124781 [USA]: An incorrectly sized airline may lengthen the distance needed to stop the vehicle, increasing the risk of a crash.

  • Recall 110174 [USA]: If the weld fails causing a loss of power to the rear wheels, the vehicle operator may be unable to move the vehicle, or may experience deceleration if the vehicle is in motion, increasing the risk of a vehicle crash.

  • Recall 111050 [USA]: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.

  • Recall 108018 [USA]: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

  • Recall 112749 [USA]: As a result, the brake caliper bolts may loosen, reducing the effectiveness of the brakes and increasing the risk of a crash.

  • Recall 107772 [USA]: Brake drag may result in a wheel end fire.

  • Recall 111121 [USA]: If the smaller wire gauge may overheat increasing the risk of a vehicle fire.

  • Recall 101629 [USA]: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.

  • Recall 2020551 [Canada]: Structure

  • Recall 2020148 [Canada]: Lights and instruments

  • Recall 2018389 [Canada]: Brakes

  • Recall 2017590 [Canada]: Accessories

  • Recall 2017267 [Canada]: Brakes

  • Recall 2015211 [Canada]: Engine

  • Recall 2015190 [Canada]: Electrical

  • Recall 2014590 [Canada]: Brakes

  • Recall 2014512 [Canada]: Electrical

  • Recall 2014046 [Canada]: Engine

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 24KWD - SERVICE BRAKES, AIR: Certain c500/t440/t470/t660/t680/t800/t880/w900 chassis may have air tank reservoirs that do not meet air volume requirements per fmvss/cmvss 121 ??A?A?Air brake systems??A?A?. This bulletin will be updated when repair parts and procedur
  • E296 - ENGINE AND ENGINE COOLING: Kenworth is providing guidance for paccar mx engine composite oil pan leak troubleshooting to avoid over-repairs and to provide warrantable repair guidance. Oil leaks, if not repaired, can lead to severe engine damage.
  • E269 - ENGINE AND ENGINE COOLING: Emissions recall - paccar mx-13 engine model year 2015b engines require a software update to ensure emissions compliance for on-board diagnostic (obd).
  • E271 - ENGINE AND ENGINE COOLING: An engine software update is required to resolve obd system readiness, def doser diagnostics, and otherobd system software related issues.
  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only ⿿ windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 27-026 - POWER TRAIN: Eaton ultrashift plus excessive engine over-speed lamp on.
  • 26-037 - POWER TRAIN: Fix-as-fail - prior versions of eaton endurant transmission software may be prone to setting linear clutch actuator (lca) fault codes leading to possible lca hardware replacement.
  • 13-054 - BRAKES (PWS): Fix-as-fail - bendix new-gen lightweight steer axle drum brake spider cracking
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-066 - STRUCTURE: Def tank covers may become loose and potentially crack on vehicles built before october 2019 with def tank part number m86-6221-003**(tank-def medium assy) and m86-6222-003**(tank-def large, assy). Resolution is to resolve the vibration on
  • 34-085 - VEHICLE SPEED CONTROL: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • TIB43-062 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information only ??A?A? This bulletin provides information about the california air resources board (carb) periodic smoke inspection program (psip) and heavy duty vehicle inspection program (hdvip).
  • 03-070 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Fix as fail: vehicles built 11/30/15 to 7/18/16 may display an error message in the service advised display after updating cecu software.
  • 63-008 - ELECTRICAL SYSTEM: Non-safety campaign - obd modem is unable to communicate to telematics systems.
  • 18-008 - WHEELS:HUB: Fix-as-fail ? There is an updated plug to fix leaking steer axle hubcaps.
  • 7-17 - WHEELS: Fix-as-fail ? There is an updated plug to fix leaking steer axle hubcaps.
  • 26-029 - ELECTRICAL SYSTEM: Fix-as-fail - a U1548 fault code is present in the davie log file, with no fault lamp illuminated or other obvious symptoms.
  • 27-026 - ENGINE (PWS): Fix-as-fail - engine over-speed lamp could come on after a downshift with the eaton ultrashift plus transmission. This does not affect the function of the vehicle.
  • 51-007 - ELECTRICAL SYSTEM:SOFTWARE: Fix-as-requested - nav+ hd software update for random reboot fix and mp3 features enabled.
  • TIB-13-040 - SUSPENSION:MULTIPLE AXLE: Kenworth: some trucks failed to meet company standards for air volume lift axle and the company will increase air volume for worthwhile improvement to exceed government fmvss 121. Model t800, w900. *pe see document search butt
  • TIB-02-135 - STRUCTURE:BODY:HOOD: Kenworth: procedural information provided regarding the replacement of hood where there are damaged hood pockets. Model t800. *pe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.