Land Rover Range Rover Sport 2007

• Recall 124772 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Jaguar land rover north america, llc (land rover) is recalling certain 2012 land rover range rover vehicles originally sold, or ever registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan) and the u.S. Virgin islands, or "zone a." additionally, land rover is recalling certain 2009 land rover range rover vehicles, originally sold, or ever registered, in arizona, arkansas, delaware, the district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia and west virginia, or "zone b." additionally, land rover is recalling certain 2007-2008 land rover range rover vehicles originally sold, or ever registered in alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin and wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  land rover will notify owners, and dealers will replace the front passenger air bag assemblies, free of charge. The recall began december 18, 2017. Owners may contact land rover customer service at 1-800-637-6837. Land rover's number for this recall is p082.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107706 [USA]: If one or both of the flexible brake hoses fails, the vehicle may require a longer distance to stop, increasing the risk of a crash.
  Jaguar land rover north america, llc (land rover) is recalling certain model year 2006-2012 land rover range rover vehicles manufactured april 15, 2005, to september 4, 2012. One or both of the flexible front brake hoses may rupture causing loss of brake fluid.
  land rover will notify owners, and dealers will replace the left and right front brake hoses, free of charge. The recall began on july 28, 2015. Owners may contact land rover customer service at 1-800-637-6837. Land rover's number for this recall is p054.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 32785 [USA]: When moving the bike arm bracket to its down position, this pinch point has to potential of causing a severe laceration or amputation to the user's fingertips or hand.
  Certain aftermarket thule hitch style bicycle racks with fold down style bike arms. A pinch bolt exists between the bike arm bracket and the upright assembly of the hitch style bicycle rack.
  thule will notify owners and provide a repair kit and instructions free of charge. The recall began on june 20, 2007. Owners can contact thule at 800-thule91 (800-848-5391). Notes: land rover purchased some of these bike racks for use on their lr3 and range rover sport vehicles, part no. Lrnapbr4. L. L. Bean also sells some of these bike racks under the model name of hitching post pro (wd75, wd76, wd77, wd78, yl05, bbg9, bbh1, bbh2, bbh4), expressway (wd72, wd73, bbh5, bbh6), or trailblazer (wd31, bbh7). Rei has also purchased some of these bike racks under model names: hitching post pro (934, 934xt, 935, 935xt, 936, 936xt, 937, 937xt, 951, 951xt), expressway (995, 995xt, 996, 996xt), and trailblazer (998, 998xt).
  customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall R/2015/014 [UK]: Possible loss of braking efficiency
  It is possible that one or both of the front brake hoses could rupture allowing brake fluid to leak. A warning lamp and message will appear on the dash board when the fluid depletes to a certain level. Braking capability will be retained by the rear brake circuit pedal feel will be degraded and pedal travel extended. Stopping distances will increase.
  recall the vehicles that are likely to be affected and replace both front brake hoses.

  Show Content

• Recall R/2010/147 [UK]: Fire may occur
  The front pump bearing on some aftermarket replacement high pressure fuel pumps may fail due to lack of sufficient lubrication. This will cause failure of the shaft seal which will cause a fuel leak and if not rectified could cause a vehicle fire.
  recall affected vehicles and replace fuel pump with the latest specification pump.

  Show Content

• Recall R/2009/073 [UK]: Possible reduction in braking assistance
  It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.
  all recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

  Show Content

• Recall R/2009/051 [UK]: Fuel may leak
  Fuel may leak from the fuel pump front bearing which could lead to poor performance smell of fuel fuel leakage at the rear of the engine fuel leak onto the ground and in the worse case fire.
  recall the vehicles that are likely to be affected to replace the high pressure fuel pump drive belt belt tensioner the high pressure fuel lines and the fuel filter.

  Show Content

• Recall R/2009/073 [UK]: Possible reduction in braking assistance
  It has been identified that some vehicles may experience a reduction in braking performance leading to increased stopping distance due to the possibility of oil entering the brake booster or the brake vacuum pump non-return valve sticking in the closed position after cold start.
  all recalled vehicles will be fitted with a modified brake vacuum pipe along with a revised design non-return valve in the secondary port of the vacuum pump.

  Show Content

• Recall 2017015 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, metal fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: depending on the model, dealers will either replace the passenger frontal airbag inflator or airbag assembly. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2015029 [Canada]: Brakes
  On certain vehicles, the front brake hoses may rupture. This could cause a loss of front brake function, causing increased brake pedal travel and reducing braking performance. This could result in increased stopping distances and result in a crash causing injury and/or damage to property. Correction: dealers will replace the front brake hoses.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Tl* the contact owns a 2007 land rover range rover. While driving various speeds, the tire pressure, system suspension, bonnet, brake, transmission, dynamic stability control, and electronic traction control warning indicators illuminated continuously. The contact stated that the only way the indicators shut off was by turning off the vehicle. The vehicle was taken to land rover tampa (11301 n florida ave, tampa, fl 33612, (813) 930-2505) where the contact was informed that the vehicle was being reset. The vehicle was repaired, but the failure recurred two days later. The vehicle was taken to an independent mechanic where it was diagnosed that the electrical system needed to be reset. The vehicle was repaired again, but the failure recurred. The manufacturer was not notified of the failures. The approximate failure mileage was 75,906.

Takata recall

I received a recall re:safety recall p081: takata passenger airbags on july 29, 2016. The manufacturer has not replaced the passenger side airbag. Please update the status of the repair.

Takata passenger airbags (recall): sir/ma'am, received a letter via mail from the national highway traffic safety administration (nhtsa), recall #16v-374. Also, it may of affected my vehicle's electrical system since my gps dashboard system no longer works anymore. I would kindly ask someone to reach out to me via cell phone so that i can get my land rover repaired as soon as possible. Thanks!

Tl* takata recall. The contact owns a 2007 land rover range rover. The contact received notification of nhtsa campaign number: 16v374000 (air bags) and stated that the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

Takata recall. This car is kept in san bernardino county, california, where there are large fluctuations of temperature and periods of high humidity in both summer and winter. The car is ten years old. The deadline for receipt of new, non-defective airbag keeps getting pushed back. The latest is "maybe this year" (per range rover representative kathleen vaccarro, 201 818 8080). When pressed, vaccarro concedes that what it boils down to is that range rover has made the judgment that it is ok for its customers to be driving a vehicle with a defective airbag for an indefinite period of time. When pressed, she concedes (as anyone has to concede) that no-one knows the point at which the inflator will have degraded and will explode. If i wanted to go skydiving and trust that the parachute usually opens, then that is my decision. What range rover is doing is making that decision for me, against my will. What is nhtsa doing about this? This appears to be about money. However, "money" is not in your name. "safety" is in your name. So where is the safety?

Tl* takata recall. The contact owns a 2007 land rover range rover. The contact received notification of nhtsa campaign number: 16v374000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified. The contact had not experienced a failure. Vin tool confirms parts not available.

Tl* takata recall. The contact owns a 2007 land rover range rover. The contact received notification of nhtsa campaign number: 16v374000 (air bags); however, the part for the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was made aware of the issue. Parts distribution disconnect.

I was driving at a speed of about 25mph on a city street and began to brake gently as i was approaching a red light. The distance between my car and the car in front of me at the time i began braking was over 3-cars-length, but not more than 4. This was not an abrupt stop. As i applied the brake i could feel it began to shudder and the car was not slowing down. I pressed the brake more firmly and while it did respond more so than before, the car was by no means slowing down at a fast enough rate considering how long i had been applying the brake and the fact that i was only traveling at 25mph to begin with. I felt a pulsating that became increasingly pronounced and eventually the brake felt as though it was locked in place and unresponsive to my application of further pressure. The car was slowing down but it was not doing so at the normal rate. It would have likely required 2-3 times the normal distance to come to a complete stop. However, the brakes were too ineffective to have reasonably anticipated (by a long shot) and i rear ended the car in front of me that had come to nearly a complete stop at that point. At the time of impact my car had only slowed down by at the most 70%. Both my car and the car i rear ended were totaled. At no time prior to or upon impact did any warning light or indicator appear on the car. Nothing forewarned me that my brakes were at all compromised. The car was totaled and dmv records will show all of that info. This is a serious problem that could be catastrophic if not investigated. Range rovers are extremely heavy vehicles which makes a breaking system failure even more dangerous than it already is. Land rover has denied any defects or other manufacturer faults. I was injured with permanent neck pain likely as a result of the airbags failure to deploy. And the passengers in the impacted vehicle sustained notable injuries as well.

Common OBD-II Error Codes

• C1A24 [1] C1A24
• U210A [1] U210A
• B1B87 [2] B1B87
• B0063 [2] ISO/SAE Reserved
• B0083 [1] Second Row Left Seatbelt Load Limiter Deployment Control (Subfault)
• P0504 [1] Brake Switch "A"/"B" Correlation
• C1A96 [1] C1A96
• C1A20 [1] C1A20
• C1119 [2] C1119
• C1B11 [2] C1B11
• P2401 [1] Evaporative Emission System Leak Detection Pump Control Circuit Low
• P2402 [1] Evaporative Emission System Leak Detection Pump Control Circuit High
• P2404 [1] Evaporative Emission System Leak Detection Pump Sense Circuit Range/Performance
• P2405 [1] Evaporative Emission System Leak Detection Pump Sense Circuit Low
• P2406 [1] Evaporative Emission System Leak Detection Pump Sense Circuit High
• P240A [1] Evaporative Emission System Leak Detection Pump Heater Control Circuit/Open
• P240B [1] Evaporative Emission System Leak Detection Pump Heater Control Circuit Low
• P240C [1] Evaporative Emission System Leak Detection Pump Heater Control Circuit High
• P2450 [1] Evaporative Emission System Switching Valve Performance/Stuck Open
• P2451 [1] Evaporative Emission System Switching Valve Stuck Closed
• U1A4C [1] U1A4C
• P0096 [1] Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
• P2601 [1] Coolant Pump "A" Control Circuit Range/Performance