Mack Chn 2008

• Recall 71556 [USA]: There is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
  On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
  dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on january 28, 2008. Owners may contact mack trucks at 1-800-528-6586.
  mack trucks recall no. SC0331.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

• Recall 2007339 [Canada]: Other
  On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Common OBD Error codes specific to this vehicle.

• C0331 [1] Magnet / TCS meter # 1 left rear - signal out of range / performance
• P215A [1] Vehicle Speed - Wheel Speed Correlation
• P1058 [1] P1058
• U029D [1] Lost Communication With NOX Sensor "A"
• U029E [1] Lost Communication With NOX Sensor "B"
• U02A3 [1] U02A3
• P0201 [1] Injector Circuit Malfunction - Cylinder 1
• P0202 [1] Injector Circuit Malfunction - Cylinder 2
• P0203 [1] Injector Circuit Malfunction - Cylinder 3
• P0204 [1] Injector Circuit Malfunction - Cylinder 4
• P0205 [1] Injector Circuit Malfunction - Cylinder 5
• P0206 [1] Injector Circuit Malfunction - Cylinder 6
• P1072 [1] P1072
• P02FA [1] Diesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance
• P0471 [1] Exhaust Pressure Sensor "A" Circuit Range/Performance
• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)