2017 MERCEDES BENZ Slk250Mercedes Benz Slk250 2017

Vehicle Details: Investigations, Service Bulletins

Below you will find all available information on the 2017 MERCEDES BENZ Slk250.

ManufacturerKnown WMI(s)Fuel Type
MERCEDES BENZ
MERCEDES BENZ VIN Decoder

Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI09.00-P-074093 - ENGINE AND ENGINE COOLING: "my15+ m278 and m157 equipped vehicles with fault code ""P023400 a?? Boost pressure is too high"" "
  • MIMY2017 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Model indicator index.
  • LI8295P054406 - EQUIPMENT:ELECTRICAL: "sos mbrace service not activated".
  • LI8270P055572 - ELECTRICAL SYSTEM:SOFTWARE: Mobile phone cotacts are not transferred completely.
  • Launch NCU - 202 - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): Mercedes-benz ag (?Mbag?), the manufacturer of mercedes-benz, has determined that on certain model year (?My?) 2013-2017 b-class, c-class, cla-class, cls-class, e-class, g-class, gl-class, gla-class, glc-class, gle-class, glk-class, gls-cla
  • LI82.10-P-062051 - EXTERIOR LIGHTING:HEADLIGHTS: Headlamps fogged
  • LI82.10-P-064766 - LIGHTING (PWS): Lamp unit fogged or droplets forming. Due to the vent openings, the lamp unit is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate it. This can result in deposits on the diffuser and lens. Che
  • NCU - HVAC Warra - EQUIPMENT: To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, mercedes-benz usa, llc (mbusa) has entered into a settlement regarding claims relating to alleged mold and mildew type
  • P-SC-2020020001 - EQUIPMENT:OTHER:LABELS: Information label on tire sealant
  • LI82.95-P-056655 - ELECTRICAL SYSTEM: Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement.
  • LI82.85-P-055695 - ELECTRICAL SYSTEM: The comand unit does not start or the comand display remains dark. The comand unit cannot be operated. Note: the problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
  • LI77.30-P-056644 - STRUCTURE: Water entry through front section of retractable hardtop with the following localization: - partial water entry in the area of the side seals to the a-pillar (for area see fig. 1) when accelerating/braking the vehicle.
  • LI27.20-P-055758 - POWER TRAIN: Fc 2783 (friction power of torque converter lockup clutch is too high) or fc 0741 (actuation of torque converter lockup clutch not possible) stored in transmission control unit. One possible additional customer complaint could be "poor acce
  • LI82.85-P-058582 - EQUIPMENT: Apple products (iphone or ipod) are not charged via the serial usb interface of the comand online control unit (a40/3) in the stowage compartment of the center console.
  • LI54.18-P-056664 - ENGINE AND ENGINE COOLING: The engine intermittently has reduced output and the engine diagnosis warning lamp is/was active. One or more of the faults relating to the intake manifold pressure sensor listed under 'control unit / fault code' may be stored in the engine
  • LI46.15-P-058505 - STEERING: Creaking noise when making vertical or longitudinal adjustment to electrical steering column
  • LI91.25-P-059380 - SEATS: Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
  • LI82.70-P-060004 - EQUIPMENT:ELECTRICAL: Iphone mobile phone: various complaints after software update to ios8
  • 2018010007 - ELECTRICAL SYSTEM:SOFTWARE: Update hermes control unit software
Known Recall Investigations
  • Desiccated air bag inflator rupture investigation # EA21002

    From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.