Prevost H3-40 2009
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2009 PREVOST H3-40.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| PREVOST |
PREVOST VIN Decoder
Use the box here to look up VINs from PREVOST as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2009 PREVOST H3-40?
- There are 1 recall(s) for the 2009 PREVOST H3-40, additional information is below.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- IS-23019 - SUSPENSION: Sway bar collars improvement
- MI16-32 - ENGINE AND ENGINE COOLING: Improved bearings are now available to replace the original bearings used on some prevost vehicles idler pulleys.
- IS-21072B - ELECTRICAL SYSTEM: Steering gateway. Revision b - pin 2 and 10 were inverted on connector a139
- MI22-12B - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: b - general update
- MI22-12A - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: a - erroneous secondary & accessory tanks location.
- MI22-12 - SERVICE BRAKES, AIR: Air tanks draining sequence
- IS-17151C - VISIBILITY: Halogen to led fog light replacement kit. Revision: c - advanced kits canceled
- MI20-08C - EQUIPMENT: Storage and startup guidelines : part number updates
- IS21-072A - ELECTRICAL SYSTEM: Steering gateway revision a cancel watch dog removal from efd part of the instruction
- IS20-925A - VISIBILITY: Central hvac merv filters installation
- IS20-932A - ELECTRICAL SYSTEM: H3 series envirocare - ions air sanitizer
- Mi21-07A - WHEELS: Ront & tag axle a?? Unitized hub bearing end play verification and replacement
- is_20089 - LATCHES/LOCKS/LINKAGES: Lavatory compartment sliding door latch improvement
- MI20-08C - STRUCTURE: Storage and startup guidelines: periodically, circumstances arise requiring operators to temporarily park a coach in storage. Whether it is a few weeks or several months, sporadic out of service times or a full stop, prevost recommends foll
- IS-20925A - POWER TRAIN: Central hvac merv filters installation reva
- IS-20932A - EQUIPMENT: H3 series envirocare - ions air sanitizer rev a
- IS-20932 - EQUIPMENT: H3 series envirocare - ions air sanitizer
- IS-18091A - STEERING: Tie rod 610052 first installation instructions: use these instructions when replacing the drop joint tie rod on s82, s84 / s84u i-beam axles. The new tie rod will be adjusted to the length of the original; however, a steering alignment ne
- MI20-19B - ENGINE AND ENGINE COOLING: Introducing a new engine coolant into prevost service center network
- MI20-19A - EQUIPMENT: Rev a: mention added concerning ddc series 60 engine sca requirement
- MI20-19 - ENGINE AND ENGINE COOLING: Introducing a new engine coolant into service
- SCi20-16 - ENGINE AND ENGINE COOLING: Fan clutch plate bolts re-torquing
- MI20-08B - EQUIPMENT: Storage and startup guidelines revision: b parts added to suggested material 08-10-2020
- IS-20922 - SEATS: Sigma passenger seats partition kit
- MI20-12 - STEERING: Jerky, noisy or hard to turn steering gearbox. Hydraulic end limiter adjustment. All models ⿿ equipped with rb bosch/zf servocom or servocomtronic steering gearbox
- MI20-08A - EQUIPMENT: Storage and startup guidelines: rev a: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed 611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831
- MI20-09 - EQUIPMENT:OTHER:LABELS: Prevost vehicle disinfection procedure
- MI20-08 - UNKNOWN OR OTHER: Storage and startup guidelines - all prevost vehicles & volvo 9700
- IS-19064 - STRUCTURE: Baggage door seal replacement
- MI15-24 - EQUIPMENT ADAPTIVE/MOBILITY: Added: power cables for l.H. Side alternator & fan drive breaker box
- IS12010 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This instruction sheet explains how to replace the left bell crank using kit 161349
- IS-08080A - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: When replacing a vehicle sound selector model vss04 with a new sound selector model vss05, an interface harness is required to connect the vehicle harness to the new sound selector model and a new vss05 compatible radio unit must also be in