Temsa Ts35 2011
Vehicle Details: Recalls, Service Bulletins
Use the box here to look up VINs from TEMSA as well as other manufacturers
-
Where is the 2011 TEMSA Ts35 produced?
- The 2011 TEMSA Ts35 is produced in ADANA Adana, Turkey.
-
Are there recalls for the 2011 TEMSA Ts35?
- There are 2 recall(s) for the 2011 TEMSA Ts35, additional information is below.
Recall 94671 [USA]: Due to the distance between the operating instructions and the window?s release mechanism, in the event of an emergency, passengers may not recognize and follow the instructions for releasing the emergency exit windows delaying their safe exit from the bus and , increasing the risk of personal injury.
Recall 94220 [USA]: Without the check lamp feature, the driver may not be aware that the indicator lamp is not working properly, and if there were an abs problem, the driver would not receive a warning. a malfunctioning anti-lock brake system may increase the risk of a crash.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
- TS-C115 - SUSPENSION: This bulletin defines alignment specifications of the ts35 vehicle. Alignment of ts 30.
- No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
- TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
- TS35E - EQUIPMENT: The lift
- TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
- TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
- Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
- TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
- TS-U111 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-U107 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: New flap is to be installed in fuel tank filler cap
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick
- RAS SYSTEM BLEED - STEERING: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
- TS-C115 - EQUIPMENT: Alignment sepcifications of ts35. This bulletin defines alignment specifications of the ts35 vehicle.
- Information Docu - POWER TRAIN:AUTOMATIC TRANSMISSION: Information document sheet.
- TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
- TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
- RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
- TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
- Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
- 9020-230Y - ELECTRICAL SYSTEM: Ts 35 epa13 wiring. Refer to section 6 and section for hardware pin-out of moki, zr32, multiplexers, and can lines. As the multiplex unites are controlled by special algorithm, in case needed, the latest vehicle program should be downloade
- TS-M127 - STRUCTURE:BODY: Zf service information bulletin for retrofitting seal carrier and readjustment of king pin
- SB-TS-M-61 - EQUIPMENT: Temsa: information provided regarding the replacement of hydraulic hoses in some buses. *pe
- SB-TS-U08 - EQUIPMENT: Temsa: information provided regarding the torque value for intercooler clamp improvement. Model ts-35. No model years listed. *pe
- SB-TS35-U06 - ELECTRICAL SYSTEM:IGNITION:SWITCH: Temsa bus: when ignition is off or key switch is removed, door control switch can not be use. A new relay flasher buzzer sound under dashboard will be installed. Modification to door control switch inside bus allows usage when ignition
- SB-TS35-U01 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR: Temsa: on some model buses, there is an issue with low voltage charge modification on the alternator. *pe