Van Hool Td925 2009
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2009 VAN HOOL Td925.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| VAN HOOL |
VAN HOOL VIN Decoder
Use the box here to look up VINs from VAN HOOL as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2009 VAN HOOL Td925?
- There are 3 recall(s) for the 2009 VAN HOOL Td925, additional information is below.
NHTSA Mandated Recalls
Recall 125488 [USA]: Cracking of a steering knuckle carrier may result in its total failure, allowing a wheel to separate from the vehicle, increasing the risk of a crash.
Recall 86234 [USA]: Excessive heating can cause a fire resulting in smoke, operator distraction, or personal injury. an overheated mirror switch could cause the exterior rear view mirrors to not operate. the mirrors may not adjust properly from the interior switch or operate poorly. therefore, the driver may not be able to have full use of the rear view mirror, increasing the risk of a crash.
Recall 2011051 [Canada]: Accessories
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SB2372 - VISIBILITY:POWER WINDOW DEVICES AND CONTROLS: This service bulletin provides you with information about the location of emergency side window decals so that the vehicle meets the national highway traffic safety administrationa??S (nhtsa) federal motor vehicle safety standards (fmvss)
- SB2345 - STRUCTURE: Two different types of step nose lighting units have been installed during manufacturing. I?? The early units (which are limited available as spare part) are provided with a led card for the a??Downwarda?? Light and an optical fiber for th
- SB2255 - EQUIPMENT:ELECTRICAL: Service information: in its production process, bock, manufacturer of refrigerant compressors, has switched to a new type of motor protection switch for the electric motor of the refrigerant compressor. As the mp10 motor protection switch (
- SB1709 - WHEELS: Product improvement: all vehicles with light-alloy wheels - introduction of wheel-end monitoring system (wem). Van hool has released a wheel-end monitoring system (wem) which can be installed on all vehicles equipped with light-alloy wheels
- SB2039A - POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY: Service information - introduction of new 4/2 solenoid valve in compressed-air circuit van hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous knorr-bremse (bosch) soleno
- SB1856 - POWER TRAIN: Service information - maintenance operations related to refrigerant compressor oil this service information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure a reliable system, it is important to perform
- SB1334 - UNKNOWN OR OTHER: To change "quick release valve" of front axle brakes.
- SB1328 - POWER TRAIN: Dana, manufacturer of axles, has informed van hool that the procedure for checking the wheel bearing end-play has been changed.
- SB1323 - SUSPENSION: Introducion to electronic contrlolled air suspension(elc).
- SB1254 - STRUCTURE: To inspect auxiliary structure around front axle for not properly executed welds.
- SB1250 - SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY: To reinforce the td925 chassis in the drive axle area.
- SB2039 - ENGINE AND ENGINE COOLING:ENGINE:SOLENOID/ACTUATOR: Service information bulletin: van hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous knorr-bremse (bosch) solenoid valve (vh11102170) is no longer made available as spare
- SB1961 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Service information bulletin: what to do in case of prolonged vehicle standstill. This service bulletin provides an overview of works to be performed during prolonged vehicle standstill.
- SB1702 - ENGINE AND ENGINE COOLING: Service information bulletin: stress-free installation of flex pipe this service bulletin gives step-by-step instructions on how to install the flex pipe properly. The flexible part of the flex pipe handles thermal expansion and engine vib
- MIC-VANH-090820 - EQUIPMENT: Van hool n.V. And abc companies did not release any new service bulletins during the month of august 2020.
- SB1796 - POWER TRAIN: Service information: he purpose of this service bulletin is to inform you about the innocent traces of lubricant at the bottom of the transmission bell housing on new vehicles. They are caused by the protective anti-corrosion coating at the
- SB1777 - STRUCTURE: Service information: this bulletin is being released as a reminder of the importance of wheel bearing preventive maintenance. Check the wheel bearing end-play every 50,000 miles*, and when having any work done on the brakes or any other com
- SB1634 - ENGINE AND ENGINE COOLING: Product improvement. Introduction of new single check valves in cooling-circuits deaeration lines.Van hool have recently switched over into production a new type of single check valve. Contrary to the previous type equipped with a plastic h
- SB1645 - WHEELS: To remove/install wheel-nut caps. Some vehicles have plastic chrome-coloured wheel-nut caps on top of the wheel nuts. This service bulletin gives instructions on how to remove/install these wheel-nut caps correctly.
- SB1402 - ELECTRICAL SYSTEM:WIRING: Van hool has determined that the parcel-rack lighting circuit is not well executed due to an error in the production process. On td925 vehicles, a connection in the parcel-rack lighting circuit is inadequate. The splicing of the electri
- 1261A - WHEELS: Service information: bevel gear of front axle steering system service records have shown that the grease in the bevel gear could affect performance at very low temperatures (below -20c/-4f). If the grease in the bevel gear becomes hard e
- 1295 - WHEELS: Field change program: proper attachment and securement of 11vac cables above lh front wheel housing field reports have shown that the routing and the clamping of the 110vac cables above the lh front wheel housing on the coach interior can
- SB1295 - WHEELS: Field change program: proper attachment and securement of 11vac cables above lh front wheel housing field reports have shown that the routing and the clamping of the 110vac cables above the lh front wheel housing on the coach interior can
- SB1254 - EQUIPMENT: Field change program: to inspect auxiliary structure around front axle for not properly executed welds on the vehicles affected by this bulletin there is a possibility that the welding bead between some tubes of the front axle auxiliary st
- SB1250 - STRUCTURE: Field change service bulletin: to reinforce the td925 chassis in the drive axle area this procedure has been released to owners of affected van hool td925 coaches in order to reinforce and repair frame cracks if they exist on the cross mem
- SB1278 - STEERING: Vanhool: procedure on replacing pivot bearing of hydraulic steering cylinder. Also recommendations for greasing. *cn
- SB-1234 - ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID: Van hool coaches: starter solenoid flyback diode. All coaches featuring multiplex technology. In the main junction box of the units, multiconnector pin e11 of multiplex node 4 (part #10690971) has been connected to the starter motor sole