Volvo Wah 2000

• Recall 106 [USA]: If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
  On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
  dealers will replace the ball socket assemblies. This campaign supersedes nhtsa campaign nos. 01v-139.001 and 02v-037.002. Owner notification began july 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1-800-528-6586.
  also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 6788 [USA]: This condition could cause the abs ecu to exhaust the air at the air brake modulators for one or more of the wheels. this could result in extended braking distances and a possible crash.
  Vehicle description: heavy duty trucks built with bendix air abs with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted abs activation at low speeds caused by 1) chafed abs wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
  dealers will replace the abs ecu.
  owner notification was phased.First mailing to critical category "a" owners began december 11, 2000.All other owner notification began february 12, 2001.Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1-800-528-6586.Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2002147 [Canada]: Suspension
  Certain vehicles affected may contain tie rod assemblies, model 20-edl, manufactured by trw. These tie rods may display premature wear that could eventually lead to the ball stud seperating from the socket assembly causing a possible loss of steering control. Correction: dealer will replace the tie rod assemblies.

  Show Content

• Recall 2001261 [Canada]: Steering
  The steer axle tie rod ball-socket assembly ball stud may separate from the socket due to premature wear. If this event occurs, there will be no steering control to the right steer axle with the potential for a vehicle crash. Correction: suspect tie rod ball-socket assemblies will be inspected and replaced as required by dealers.

  Show Content

• Recall 2000210 [Canada]: Brakes
  On certain vehicles, the abs ecu misinterprets certain signals from wheel ends which can result in the temporary loss of braking capability on one or more wheel positions for several seconds. This response results from either an abs cable that has chafed through the insulation and contacted a rotating part or a misaligned tone ring that has been damaged by contacting other components. Correction: abs ecu will be replaced with a new ecu with upgraded software capable of detecting and properly responding to erroneous signals.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Consumer stated that the drivline failed. *yh

Common OBD-II Error Codes

• U0121 [1] Lost Communication With Anti-Lock Brake System (ABS) Control Module
• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)