FSB 293-024

Service Bulletin Details

Public Details for: FSB 293-024

Exhaust gas recirculation (egr) differential pressure sensor


- 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 -

Volvo Trucks North America
Greensboro, NC USA
Date
This Field Service Bulletin replaces bulletin FSB 293-024
dated 3.2014.
7.2014
Group
No.
Release
293 024 03
Page
1(4)
EGR Differential Pressure Sensor
D13F, D13H
FSB 293-024, Exhaust Gas Recirculation (EGR)
Differential Pressure Sensor
(July 2014)
On VOLVO vehicles equipped with a VOLVO D13 engine built between January 1, 2007 and
January 1, 2013 that require the replacement of the EGR venturi tube or an EGR differential
pressure sensor, it will be necessary to replace them with a kit to update the system to the
current levels.
Note: It is NOT necessary to replace the entire engine harness when a new type sensor is
being installed.
Note: Once a vehicle has been updated with the new style EGR venturi tube and differential
pressure sensor, future repairs of these components should be performed individually and not
with the update kit.
CAUTION
Confirm pin locations are correct when installing the EGR differential pressure sensor
jumper harness. Improper pin locations will result in improper operation. Refer to Engine
Harness Connector Pin Locations in this bulletin.
Refer to the appropriate service bulletin in Function Group 29 for service procedures.
Service personnel: Please circulate, read and initial
Service
Manager
Warranty
Administrator
PV729-FSB293-024_V
Workshop
Foreman
Service Technicians
USA65413
Volvo Trucks North America
Date
7.2014
Group
No.
Release
293
024
03
Engine Harness Connector Pin Locations
EGR Differential Pressure Sensor DIN Connector Engine Harness
DIN Connector Housing Wire Assembly and Plug Positions
Wire Assembly
Plug Position
White/Green (+5V)
DIN Connector Position 1
Brown (Signal)
DIN Connector Position 2
White/Brown (GND)
DIN Connector Position 4
Sealing Plug
DIN Connector Position 3
EGR Differential Pressure Sensor DIN Connector Jumper Harness
DIN Connector Housing Wire Assembly and Plug Positions
Wire Assembly
Plug Position
Green (+5V)
DIN Connector Position 1
Brown (Signal)
DIN Connector Position 2
Yellow (GND)
DIN Connector Position 4
Sealing Plug
DIN Connector Position 3
Page
2(4)
Volvo Trucks North America
Date
7.2014
W2056394
Old Style Differential Pressure Sensor
W2079416
New Style Differential Pressure Sensor
Group
No.
Release
293
024
03
Page
3(4)
Volvo Trucks North America
Date
7.2014
Group
No.
Release
293
024
03
Required Parts
EGR Differential Pressure Sensor Kits
Description (Application)
Kit Part Number
Non-Allison Transmission
85143379
Allison Transmission
85143380
Non-Allison Transmission Kit Includes
Description
Quantity
Sensor
1
Harness
1
Venturi
1
Wrap
1
Screw Sensor
2
O-Ring
2
Allison Transmission Kit Includes
Description
Quantity
Sensor
1
Harness
1
Venturi
1
Wrap
1
Screw Sensor
2
O-Ring
2
Page
4(4)


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.