FSB-364-036
Service Bulletin Details
Public Details for: FSB-364-036
Mack truck: flashers are to be removed due to durability issues. *js
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 -
Models from 2012
| 2012 MACK GRANITE (GU) |
| 2012 MACK PINNACLE (CHU) |
| 2012 MACK PINNACLE (CXU) |
| 2012 MACK TD |
Models from 2010
| 2010 MACK CHU |
| 2010 MACK CXU |
| 2010 MACK GU |
Models from 2009
| 2009 MACK CHU |
| 2009 MACK CXU |
| 2009 MACK GU |
Models from 2008
| 2008 MACK CHU |
| 2008 MACK CXU |
| 2008 MACK GU |
Models from 2007
| 2007 MACK CHU |
| 2007 MACK CXU |
| 2007 MACK GU |
Models from 2006
| 2006 MACK CHU |
| 2006 MACK CXU |
| 2006 MACK GU |
SB-10052362-1862 Mack Trucks, Inc. Greensboro, NC USA Field Service Bulletin Trucks Date Group No. Release Page 6.2013 364 036 01 1(5) Flasher Replacement CHU, CXU, GU, TD FSB 364-036, Flasher Replacement (June 2013) Mack is removing the flasher 20971013 from production and the aftermarket due to the durability issues of the flasher. The 20971013 flasher will be replaced by 25162061 in the aftermarket. This will increase the reliability of the flasher circuit and the vehicle. Follow the procedure to replace the flasher if needed. Note: This bulletin does not apply to MACK Trucks Australia. Required Parts 1 - 25162061 Flasher 2- 25099161 Screw 1 - 25173632 Harness W3082443 PV729-FSB364-036_M USA59502 Mack Trucks, Inc. Field Service Bulletin Date 6.2013 Group No. Release 364 036 01 Repair Procedure Note: Information is subject to change without notice. Illustrations are used for reference only, and may differ slightly from the actual engine version. However, key components addressed in this information are represented as accurately as possible. You must read and understand the precautions and guidelines in Service Information, Function Group 30, "General Safety Practices, Electrical and Electronics" before performing this procedure. If you are not properly trained and certified in this procedure, ask your supervisor for training before you perform it. 1 Secure the vehicle for service by parking it on a flat level surface, applying the parking brake, chocking the rear wheel, and placing the transmission in neutral. 2 Disconnect all cables from the negative (ground) battery terminals to prevent personal injury from electrical shock and prevent damage to electrical components. 3 Remove the upper dash panel covering the fuse and relay center. C0035358 4 Remove and discard the old flasher. Page 2(5) Mack Trucks, Inc. Field Service Bulletin Date 6.2013 Group No. Release 364 036 01 5 Install the new “Kysor Flasher” into position and secure with drill and drives as needed. W3082444 6 Connect the harness end into the socket position for the flasher connection. 7 Connect both end of the pigtails together. W3082446 Page 3(5) Mack Trucks, Inc. Field Service Bulletin Date 6.2013 Group No. Release 364 036 01 8 Attach the ground lead to stud #7 or #8. W3082445 9 Check flasher operation. 10 Install the upper dash panel cover. C0035358 11 Install all the previously removed cables to the negative (ground) battery terminals. 12 Start the engine, check for proper vehicle operation. Page 4(5) Mack Trucks, Inc. Field Service Bulletin Date 6.2013 Group No. Release 364 036 01 Page 5(5) Reimbursement This repair may be eligible for reimbursement if a product failure was experienced within time and mileage limits of the applicable Warranty coverage. Reimbursement is obtained via the normal claim handling process. Claim Type (used only when uploading from the Dealer Bus. Sys.) 01 Labor Code Primary Labor Code 7263B-01-80 0.3 hrs. Causal Part 20971013 Mack Trucks, Inc. engages in a comprehensive program of testing and evaluating to provide the best possible product. Mack Trucks, Inc. however, is not committed to, or liable for updating existing vehicles.