2011 MACK Pinnacle (cxu)Mack Pinnacle (cxu) 2011

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2011 MACK Pinnacle (cxu).

ManufacturerKnown WMI(s)Fuel Type
MACK
MACK VIN Decoder

Use the box here to look up VINs from MACK as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2011 MACK Pinnacle (cxu)?
     - There are 11 recall(s) for the 2011 MACK Pinnacle (cxu), additional information is below.
NHTSA Mandated Recalls
  • Recall 111944 [USA]: If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.

  • Recall 103306 [USA]: A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.

  • Recall 103604 [USA]: A blocked reflector makes the truck-tractor less visible when operating the vehicle without a trailer in the dark, increasing the risk of a crash.

  • Recall 102077 [USA]: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.

  • Recall 96998 [USA]: Overheated brake components could result in a fire.

  • Recall 74844 [USA]: If the driver drives away with a trailer that is not properly coupled, the trailer can come loose and potentially result in a vehicle crash.

  • Recall 66776 [USA]: If the weld fails, the pedal shaft may work its way loose and potentially cause the clutch pedal to fall to the floor, which would limit the driver's control of the vehicle increasing the risk of a crash.

  • Recall 76885 [USA]: Slack adjusters with this flow notch could crack under normal braking conditions causing loss of braking which could result in a vehicle crash.

  • Recall 76535 [USA]: The bolts may fail and could result in the fifth wheel coming loose causing the trailer to separate from the tractor increasing the risk of a crash.

  • Recall 71189 [USA]: Lack of reflectors could lead to reduced visibility of the vehicle increasing the risk of a crash.

  • Recall 79488 [USA]: If this occurs, the battery box lid may come off when stepping on the step, which may cause a person to fall from the vehicle resulting in personal injury.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • CBR-2350 202402 - ELECTRICAL SYSTEM: Cbr -telematics gateway (tgw) connect ability issues
  • CBR-2347 202402 - ELECTRICAL SYSTEM: Cbr - active "set park brake" message on drivers information display (did).
  • CBR-202 202402 - POWER TRAIN: Cbr - automated manual transmission ( amt ) flywheel pilot bearing wear on input shaft.
  • M-465-001 202311 - POWER TRAIN: Tsb: mack trucks now offer an improved hd inter-axle through shaft for the crd 125, 150, 180, and 200 family carriers. The new hd shaft went into production on january 23rd, 2023 for 2.54 - 3.50 axle ratios and april 1st, 2023 for 3.56 - 3.
  • M728-005A 202308 - SUSPENSION: Tsb: barksdale leveling valve, leak test
  • M-141-001 202308 - ENGINE AND ENGINE COOLING: Tsb: air restriction indicator
  • KC-474-Ver5 - POWER TRAIN: Cbr: diagnostic trouble code (dtc) P215A-64, fault code spn 84 fmi 19
  • KC-614-Ver4 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Cbr: ewarranty to uchp labor code ( scc code ) crossover, conversion information for use with campaigns ( fi, pi ) and recalls ( ec, sc ), location on trucks dealer portal ( tdp )
  • M-170-003 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Tsb: vibration diagnostics
  • M-170-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Tsb: stock vehicle storage and maintenance
  • M-170-002 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Tsb: new vehicle safety certification requirements for vehicles, u.S. And canada
  • KC-2116 - ENGINE AND ENGINE COOLING: Cbr: mack nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-753 - ELECTRICAL SYSTEM: Mack chassis - terrapro (mru) and low entry (leu) models - field service bulletin fsb 381-042, warning light bar (wlb) replacement and software conversion kit - us07, us10, us10+obd13, us14+obd13 to us14+obd16 emissions, model years 2008 to
  • KC-2254 - ELECTRICAL SYSTEM: Mack chassis - no gauge cluster backlight
  • KC-2165 - ENGINE AND ENGINE COOLING: Mack def pump troubleshooting guide - us10+obd13 and newer emissions
  • M-265-002 - ENGINE AND ENGINE COOLING: Tsb-charge air cooler t-clamp install.
  • M-451-002 - SUSPENSION: 2009 document reformatted to be published as a tsb in impact. Axle carrier pinion angles
  • M-652-001 - SUSPENSION: 2009 document reformatted to be published as a tsb in impact. Axle alignment specifications
  • M-413-004 - POWER TRAIN: 2009 document reformatted to be published as a tsb in impact. Air-operated clutch assist adjustment and troubleshooting
  • KC-2112 - ELECTRICAL SYSTEM: Programming failure - chassis with cummins engine and an allison transmission
  • KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions.
  • KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions.
  • KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions.
  • KC-405 - POWER TRAIN: Warranty automated manual transmission ( amt, i-shift, mdrive ) control housing assembly; guidelines for filing a claim for chassis return visit with transmission issues after a repair requiring control housing removal and reinstallation -
  • KC-735 - EQUIPMENT: Premium tech tool (ptt) - message for data mismatch, product configuration mismatch; instruction to run an accessory kit displayed when attempting to run diagnostics for diagnostic trouble codes (dtc) or programming - us10+obd13 and newer e
  • KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
  • KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
  • KC-751 - POWER TRAIN: Vehicles equipped with an automated manual transmission model d or f ( amt-d, amt-f ) - transmission oil leakage from transmission input shaft seal or output shaft seal - us10 and newer emissions, common model years 2010 and newer.
  • KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
  • KC-653 - ENGINE AND ENGINE COOLING: Low oil pressure diagnostic process for 11 liter engines
  • KC-644 - ENGINE AND ENGINE COOLING: Manual compression test adapter for engines with stainless steel injector sleeves (conical tip injectors) - us07 and newer emissions, model year 2008 and newer
  • KC-630 - ENGINE AND ENGINE COOLING: Sensor and parameter value monitor - template parameter list for pre-obd (9-pin diagnostic connector) chassis in premium tech tool ( ptt ); regeneration and road test sensor monitor parameters - us07 and us10 emissions, model years 2008 to
  • KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
  • KC-2172 - UNKNOWN OR OTHER: No start condition after over the air programing - vecu5 no start "safe state"
  • KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
  • KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
  • KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
  • KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
  • KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
  • KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
  • KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
  • KC-633 - WHEELS: Mack chassis - front hub with unit-bearings ( unitized wheel bearings ), inspection information and guidelines - commonly model year 2008 and newer
  • KC-648 - UNKNOWN OR OTHER: Mack - pto pump speed calculator
  • KC-686 - VEHICLE SPEED CONTROL: (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
  • KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
  • KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
  • KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
  • KC-731 - POWER TRAIN: Mack chassis - equipped with an automated manual transmission model d or f (mdrive, amt-d, amt-f) - transmission oil leakage from transmission input shaft seal or output shaft seal - us10 and newer emissions, common model years 2010 and new
  • KC-2157 - ENGINE AND ENGINE COOLING: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions
  • KC-561 - ENGINE AND ENGINE COOLING: Engine oil analysis specifications - us10 and newer emissions
  • KC-552 - ENGINE AND ENGINE COOLING: Aftertreatment control module ( acm ) diagnostic trouble codes ( dtc ) U0001-88 and U0010-88 lighting the malfunction indicator lamp ( mil ); possible derate warning ⿿ us10 and newer chassis
  • KC-538 - ENGINE AND ENGINE COOLING: Regen fails to start/initiate or starts and immediately stops - us10 and us10+obd13 emissions
  • KC-529 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: System date and time, information; diagnostic tool ( j-pro, premium tech tool ( ptt ) ) displays incorrect timestamp for diagnostic trouble code ( dtc ) / fault code occurrences, possible data link codes present - us07 and newer emissions,
  • KC-495 - ELECTRICAL SYSTEM: Intake pre-heater electrical schematics (diagrams) - us10+obd13, us14+obd13 to us14+obd16 emissions
  • KC-492 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV): Diagnostic trouble code (dtc) P04DB - crankcase ventilation disconnected; us10+obd13 to us14+obd16 emissions
  • KC-2157 - UNKNOWN OR OTHER: Aftertreatment hydrocarbon injector (ahi) troubleshooting guide - us10+obd13 and newer emissions
  • KC-394 - LANE DEPARTURE: Mack chassis - cxu - lane departure warning system ( ldws ) more sensitive to the right-hand ( passenger ) side of the vehicle; pi0882
  • KC-404 - FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:INJECTORS: Volvo chassis - diesel exhaust fluid ( def ) contamination in fuel system, inspection and repair - us10 to us14 ( non-common rail fuel system )
  • KC-402 - UNKNOWN OR OTHER: Volvo chassis - diagnostic trouble code (dtc) sa 0 fmi 0 or spn 0 fmi 0 present on fault code readout - us10 and newer emissions, model year 2011 and newer
  • KC-286 - UNKNOWN OR OTHER: Mack chassis - fsb 563-008 plugs, pressure protection manifold - new brass plugs for noregon pressure protection manifold (ppm)
  • KC-283 - EXTERIOR LIGHTING:HEADLIGHTS: Mack chassis - models - anthem (an), pinnacle (pi, cxu, chu) - headlamp aiming instructions;
  • KC-253 - FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM: Mack chassis - fsb 237 - 020, unit injector yoke hold - down bolt torque specification
  • KC-238 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Mack chassis - where to find the body builder portal - body builder manual ( bbm ) information - us04 and newer emissions, model year 2008 and newer
  • KC-163 - FUEL SYSTEM, DIESEL: Diesel fuel information - acceptable biodiesel, fuel blend for summer and winter - us07 and newer emissions, model year 2008 and newer
  • KC-145 - POWER TRAIN: Automated manual transmission (amt) (spigot bearing) input shaft repair kit and shim kit, part number information, reference guide - us07 and newer emissions, model year 2008 and newer
  • KC-119 - POWER TRAIN: Mack chassis - equipped with an automated manual transmission (mdrive, amt) amt-c, amt-d or amt-f - transmission oil specifications - model years 2010 to 2020
  • KC-73 - EQUIPMENT: Mack chassis - disabling the driver id; removing the driver id prompt - us07 to us14+obd16 emissions, model years 2008 to 2017
  • KC-692 - EXTERIOR LIGHTING:LIGHTING CONTROL MODULE: Lighting control module ( lcm ) replacement - refer to technical parts information ( tpi ) 364 - 034 control unit
  • KC-136 - ENGINE AND ENGINE COOLING: Aftertreatment control module (acm) offline/not visible/missing from control unit information in premium tech tool (ptt) - us10+obd13 and newer emissions
  • KC-124 - POWER TRAIN: Automated manual transmission gearbox will not shift to high range after gearbox repair; mid 130 psid 24 fmi 1, P1072-92 unintentional disengagement of high range - us07 and newer emissions, model year 2008 and newer
  • KC-116 - UNKNOWN OR OTHER: Mack chassis - equipped with an automated manual transmission ( amt, mdrive ) - transmission grinding when downshifting following installation of a reman transmission or range assembly; range synchronizer (synchro) timing procedure - us07 a
  • CBR-15 - ENGINE AND ENGINE COOLING: Diagnostic trouble codes (dtc) for the engine pre-heat relay: supplementary instructions
  • FSB 491-032 - EQUIPMENT: Transmission oil cooler hose, replacement
  • K65527708 - EQUIPMENT: Diagnostic trouble codes (dtc) P20EE and P103C, diagnostic procedure; replaces guided diagnostics in premium tech tool ( ptt ) - us17+obd16 and newer chassis only
  • K84061935 - FUEL SYSTEM, DIESEL: Mack chassis - diagnsotic trouble code P026D-00, fuel injection quantity higher than expected; diagnosis and information - us14+obd15 emissions, model year 2016
  • K71313015 - STRUCTURE:BODY:HOOD: Hood insulation separating from hood, insulation installation instructions
  • K84940464 - POWER TRAIN: Expired - refer to k45673535 - mack chassis snm15-002b mdrive transmission service strategy ( revised failure mode descriptions )
  • K15194127 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Mack chassis - fault code sid 158 fmi 0 logging in instrument cluster ( mid 140, ic ), no code description or diagnostic information
  • K23315031 - FUEL SYSTEM, GASOLINE: Fuel tank strap insulator design update; fuel tank strap appearance changed
  • K93823300 - ENGINE (PWS): Mack chassis - pinnacle (chu,cxu,pi), anthem (an), granite (gu,gr) with mack engine only - power take off ( pto ) engine speed control inoperative; engine speed does not ramp when pto is activated - model year 2007 and newer
  • K25229168 - POWER TRAIN: Automated manual transmission gearbox will not shift to high range after gearbox repair; mid 130 psid 24 fmi 1, P1072-92 unintentional disengagement of high range - us07 and newer emissions, model year 2008 and newer
  • K76992557 - FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:FUEL RAIL: Aftertreatment hydrocarbon injector (ahi, 7th injector) changes between us10 and us17 (ghg17, common rail fuel system) - chassis experiencing high soot accumulation, abnormal ( too high, overtemp, too low ) regeneration temperatures followi
  • K04247174 - ENGINE (PWS): Diagnostic trouble code ( dtc ) p471 illuminating the malfunction indicator lamp (mil) - us17+obd16, us17+obd18 (ghg17, common rail fuel system) chassis with turbo compound only
  • K72614548 - ELECTRICAL SYSTEM: Diagnostic trouble code ( dtc ) P02FA illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K01050303 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Diagnostic trouble code ( dtc ) P0471 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K04342327 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Diagnostic trouble code ( dtc ) P0420 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K58557784 - ELECTRICAL SYSTEM: Fuel injector offset learning diagnostic trouble codes ( dtc ) / fault codes logged in engine control module ( ems ); possible rough / uneven idle - obd15 chassis
  • FSB284064 - ENGINE (PWS): Ecm and acm reprogramming, obd2015
  • FSB-364-037 - ELECTRONIC STABILITY CONTROL: Mack: when the output from the vecu gets shorted out to gnd, there is no warning and causes 5th wheel to slide without activating 5th wheel slide switch and needs to be reprogram. Model 2010-2014 chu, cxu, gu, td. *pe
  • FSB-511-002 - SERVICE BRAKES, AIR:DRUM:SHOES/LININGS: Mack: the protrusion of brake shoes beyond brake drum is being replaced with new 152mm (6.0 in) brakes shoes, 178 mm (7.,0 in) wide brake drums on some trucks. Model 2011-2014 chu, cxu, gu, td. *pe
  • FSB-511-009 - SERVICE BRAKES, AIR:DRUM:SHOES/LININGS: Mack: brake shoes protrudes beyond brake drum and can be resolved by installing brake shoes 152mm (6.0 in) and wide brake drums 18mm (7.0 in). Model 2011-2014 chu, cxu, gu, td. *pe
  • PI-364-845 - ENGINE (PWS): Mack: when suspension, on some trucks, is left dumped, there are no warning light, buzzer or road speed limit, due to vehicle electronic control unit (vecu) software fails to support vendor engines regarding this function. Model gu, cxu.
  • FSB-375-012 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Mack: when threshold of high voltage has been met, the lifeguard battery protection system (lvd) relay may not turn loads back on, due to an assembly error at supplier. Model 2010-2014 chu, cxu. *pe
  • PI-0845 - ENGINE (PWS): Mack: when suspension is left dumped, no warning light, road speed limit or buzzer due to software in vehicle electronic control unit (vecu) is not supporting vendor engines and needs reprogramming. Model 2011-2013 gu, cxu.
  • FSB-234-018 - EQUIPMENT ADAPTIVE/MOBILITY: Mack truck: to increased protection against fuel injector tip erosion, a new fuel tank ventilation filter was implemented, and mounts on outside of frame rail, using fuel tank j bracket huck fasteners. Model chu, cxu, gu, td.
  • FSB-593-013 - EQUIPMENT ADAPTIVE/MOBILITY: Mack truck: the grade gripper feature, on some trucks, are prone to harsh environments with internal contamination, caused by build up of grime, salt, road debris and other contaminants. Model chu, cxu, gu, td. *pe
  • FSB-234-019 - EQUIPMENT: Mack truck: mounted outside of frame rail, is new fuel tank ventilation filter mounting sleeve, using fuel tank j bracket huck fasteners and to increase protection against fuel injector tip erosion. Model chu, cxu, gu, td. *pe
  • PI-0848 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: Mack truck: in the wire harness that connects the chassis to tank, some wire seals may be missing, and can cause corrosion at connections. Model cxu. *pe
  • FSB-284-048 - ENGINE (PWS): Mack truck: due to oil contamination into engine wire harness, main oil gallery pressure sensor or piston cooling jet pressure sensor has failed and new anti wicking jumper harness is available to stop oil from wicking back and causing dam
  • PI-0839 - ELECTRICAL SYSTEM:SOFTWARE: Mack truck: to address piston cooling jet (pcj) diagnostic fault, regenerations in cold climates (-20c), the transmission electronic control unit (tecu), engine control module (ecm) and aftertreatment control module (acm) have updated soft
  • FSB-284-044 - ENGINE (PWS): Mack: under certain conditions, higher than expected turbocharger wheel speed, uneven engine speed, low t2 temperatures, high engine load, may have regeneration service failures. Model cxu, gu. No years listed. *pe
  • FSB-284-044 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Mack trucks: under certain conditions, some trucks may have experience regeneration service failures, that include higher turbocharger wheel speed, higher boost pressure, high engine load, uneven engine speed and low t2 temperatures on eng
  • PI-0827 - SUSPENSION: Mack: information procedure regarding the inspection and replacement of top plate and spring seat, due to defective bushings of twin y air suspension, if needed. Model chu, cxu. No years listed. *pe
  • FSB-413-003 - POWER TRAIN:CLUTCH ASSEMBLY:BELL HOUSING: Mack: on some trucks, more leg and knee room was provided for operator comfort due to air operated clutch assist system designed to reduce clutch pedal effort by 20% and clutch pedal travel by 2' (50.8mm). Model chu, ctp, cxp, cxu, gu. N
  • FSB-512-002 - SERVICE BRAKES, AIR:DISC:ROTOR: Mack: air disc brake experiencing thermal overload condition that over adjustment of normal pad wear compensation that maintains running clearance between brake pad and rotor and reduces running clearance below desired level. Model chu, c
  • FSB-373-019 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mack: due to supplier manufacturing issue with connector, some trucks may experience multiple open circuits in 31 way transmission connector and would to be inspected and if needed, repaired and replaced. Model 2011-2013 chu, cxu, gu, td.
  • FSB-831-002 - STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS: Mack: the door stop bracket will fail, on some trucks, due to an over extension of door, but a new door design assembly is available. Model chu, cxu, gu, td. No years listed. *pe
  • FSB-284-047 - ELECTRICAL SYSTEM:WIRING: Mack: on some trucks, oil contamination into engine wire harness, may be from oil level sensor failure and an anti wicking pigtail splice kit is available. Model chu, cxu, gu, leu, mru, td. No years listed. *pe
  • PI-0823 - STRUCTURE:BODY: Mack trucks: the chassis fairing skirt needs to be installed. *js
  • FSB-413-001 - POWER TRAIN:CLUTCH ASSEMBLY: Mack trucks: the air assisted clutch cable on some vehicles may fray at the clevis. *js
  • FSB--381-048 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Mack trucks: a popping sound may be heard in the speakers of some vehicles built with a separate radio amplifier and low voltage disconnect system. *js
  • FSB-873-015 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Mack trucks:due to excessive moisture in the climate unit, some vehicles may develop a blower motor failure. *js
  • FSB-364-036 - ELECTRICAL SYSTEM: Mack truck: flashers are to be removed due to durability issues. *js
  • FSB-221-010 - ENGINE (PWS): Mack trucks: low oil pressure. Stored dtc spn 100 fmi 1, during long hard pull conditions. *js
  • FSB-364-035 - EXTERIOR LIGHTING:TURN SIGNAL:SWITCH: Mack trucks: new switch mounting bracket was developed to replace existing turn signal switch mounting bracket, due to contact between switch fingers and sleeping shaft, that caused switch operation to improperly cancels itself. Model ch
  • FSB-371-045 - EQUIPMENT ADAPTIVE/MOBILITY: Mack truck: regarding the breaking or cracking, at starter solenoid stud, of 90 degree positive battery cable lug; the lug was bent at time of assembly, and engine vibrates, causing termination of terminal to weaken. Models cxu, gu. Mod
  • FSB-820-002 - EQUIPMENT: Mack: on some model trucks, the hood life of the shocks are short and need to install new shocks, with protective boot. Models 2009-2012 cxu. *pe
  • FSB-371-044 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES: Mack truck: torque issue and material may be causing battery cable clamps to crack or break. Truck needs to be inspected to determine how many clamps are cracked or broken. Model 2010-2012 chu, cxu, gu, leu, mru, td. *pe
  • PI-0815 - SUSPENSION: Mack trucks: rear suspension hardware torque. Bolts are loose or incorrectly torqued on the primaax suspension. *js updated 07/18/2013 *js
  • PI-0812 - SUSPENSION:REAR: Mack trucks: rear suspension adjustment washers. Replacement of the suspension adjustment washers is required. *js
  • PI-371-802 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES: Mack truck: located between clutch housing and clipping point on frame, behind battery box, is where battery cables are rubbing over slung cross members, due to improper cable routing and needs to be rerouted. Models cxu. No model years
  • FSB-820-001 - LATCHES/LOCKS/LINKAGES:HOOD:LATCH: Mack truck: on certain grade level or with wind blowing, hood opening angle may fail and fall shut, when safety latch is released. Models 2010-2012 cxu. *pe
  • PI-0796 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Mack truck: information provided regarding modification of egr valve on engines and removal of poppet shaft end cap o rings. Models chu, cxu, gu, leu, mru. No model years listed. *pe
  • FSB-371-043-1 - ELECTRICAL SYSTEM:WIRING: Mack truck: due to vehicle electronic control unit (vecu) output wire pt02, the circuit cb7a is in wrong cavity location, causing pt02 (power take off) function not working correctly. *pe
  • FSB-372-011 - EXTERIOR LIGHTING:BRAKE LIGHTS: Mack trucks: four way flasher abs fault. Certain vehicles equipped with a webb solid state flasher, built from jan. 1, 2010 to june 29, 2012 may experience an active abs fault when the 4 way flasher is enabled. *js
  • FSB-293-007 - FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES: Mack trucks: egr differential pressure sensor pin fretting. Severe fretting damage of the engine exhaust gas recirculation differential pressure sensor's (egr differential pressure sensor) connector may cause an unreliable signal to the sen
  • FSB-258-033 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER: Mack trucks: engine tubocharger compressor bypass valve, airline routing. This document covers the procedure for routing the flexible air line around the front of the engine if the existing steel air line fail. *js
  • PI-0792 - ELECTRICAL SYSTEM:SOFTWARE: Mack: due to wrong main software, driver information display (did) is missing the icon mdrive for transmission. *pe
  • PI-0781 - ENGINE (PWS): Mack: due to fretting of connector pins in engine vgt actuator connector, a new mounting arrangement has been developed and relocation of engine vgt actuator connector. Models chu, cxu, gu, mru, mp8. *pe updated 7/31/12.
  • PI-0780 - SUSPENSION:REAR:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE: Mack: during extreme downward articulation of rear axle, the air spring may separate at mounting bell. *pe
  • FSB-255-024-03 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Mack: an unreliable signal to engine vgt actuator from engine variable geometry turbocharger (vgt) actuator harness that has severe fretting damage, the connector pin and socket contacts should be replaced. *pe updated 9/17/12.
  • FSB-234-014-1 - FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY: Mack: on the right side of truck, is the mounted stanchion exhaust bracket and fuel vent lines, which the fuel tank ventilation filter is added. Models chu, cxu, gu, td, mp7, mp8, mp10, us07, us10. Model years 2008-2012. *pe
  • FSB-212-002 - ENGINE AND ENGINE COOLING:ENGINE: Mack trucks: oil seepage at flywheel housing. This problem has already been solved in production, but the production solution is not compatible with previous generation flywheel housings. *js
  • FSB-255-023 - ENGINE AND ENGINE COOLING:ENGINE: Mack trucks: severe fretting damage of the engine variable geometry turbocharger actuator (engine vgt actuator) harness and turbine shaft speed sensor (tss) connectors may cause an unreliable signal to the engine vgt actuator. Also include
  • FSB-258-032 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP: Mack: the aftertreatment diesel exhaust fluid (def) tank filler neck is being replaced with an improved filler neck . *pe updated 5/11/12. *pe
  • FSB-258-031 - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING: Mack: on certain mack vehicles built before 2/13/2012, the front chassis to urea tank connection, located on the side of the def tank may rub mounting bracket or not stay secured. *js
  • FSB-652-004-1 - SUSPENSION:MULTIPLE AXLE:TORQUE ARM: Mack: torque rod replacement on front rear axle. *js updated 5/9/12. *pe
  • FSB 313-001 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Mack: battery terminal corrosion. On certain cxu models equipped with the three battery box design, the battery terminals have corroded due to contaminants splashing directly onto the batteries. *js
  • FSB-364-032 - ELECTRICAL SYSTEM:SOFTWARE: Mack truck: trucks will be reprogram with the latest software version of vehicle electronic control unit after experiencing lost of dst2 and the chassis id. *pe
  • FSB-261-032 - UNKNOWN OR OTHER: Mack truck: expansion tanks may have persistent coolant leaks that requires inspection. Examine expansion tank for burn hole/mark under pressure cap that enables hot coolant to enter expansion area. Models chu, cxu, gu and td. *pe
  • FSB-258-030 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Mack truck: between aftertreatment hydrocarbon dosing module initial design and boss on mp8 engine, an interference was discovered. It prevents bracket and aftertreatment hydrocarbon dosing module from mounting flush to surface of engin
  • FSB-258-029 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Mack trucks: software update installation of engine turbocharger compressor bypass valve kit for the engine control module (ecm). *pe
  • PI-0761 - ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR: Mack trucks: to prevent grounding of positive terminal of an alternator on certain truck (cxu) engines, the clutch cable at the alternator (denso) has been rerouted. *pe
  • PI-0746 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS: Mack trucks: on certain trucks (chu, cxu gu td), all aftertreatment diesel exhaust fluid (def) coolant hoses are to be replaced. *pe
  • FSB-844-003 - VISIBILITY:GLASS, SIDE/REAR: Mack truck: passenger door peep window is loosening from door. This may result in the window butyl tape softening because of high temperatures. *pe
  • FSB-233-004 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: Mack truck: there is fuel leakage at tandem fuel pump. The replacement of fuel pump will not correct weep hole leakage of fluid leak. Chp, ctp, cxp, chu, cxu, gu, leu, mru, td, cmm, cmh models. *pe
  • SP-365-001 - POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE): Mack: clutch operation error prevents starter engagement unless pedal is fully depressed. *rm
  • SP-372-010 - EQUIPMENT:OTHER:LABELS: Mack trucks: the fuse identification decal is being corrected. *rm
  • SP-284-030 - ELECTRICAL SYSTEM:SOFTWARE: Mack trucks: there are engine ecm software updates. *rm
  • SP-263-047 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN: Mack trucks: there may be incorrect torque specifications on the fan hub assembly. *rm
  • FSB-323-013 - EXTERIOR LIGHTING:HEADLIGHTS: Mack truck: there is new routing for the headlamp harness. *rm
  • FSB-370-001 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES: Mack trucks: the diagnostic connector may become loose. Information on replacement of the diagnostic retainer clip. *rm
  • SP-430-001 - POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY: Mack trucks: the transmission shift instruction label has been updated. *rm
  • FSB-491-029 - UNKNOWN OR OTHER: Mack trucks: there are cracks in a steel oil tube that can lead to leaking. *rm updated 2/21/12. *pe
  • FSB-258-026 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: Mack trucks: the location of the nitrous oxyde sensor and piping around it has been changed to protect it from moisture damage if water enters the exhaust. *rm
  • FSB-293-011 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Mack trucks: there are new egr outlet hose clamps. *rm
  • SP-252-001 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Mack: procedure to fix the an insulation blanket in the exhaust system that can deteriorate over time. *rm updated 9/12/11. *pe
  • SP-252-002 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: Mack: procedure to fix the an insulation blanket in the exhaust system that can deteriorate over time. *rm updated 9/12/11. *pe
  • SB-262-008 - ENGINE AND ENGINE COOLING: Mack trucks: there is a new thermostat seal and cover to prevent coolant leakage. *rm
  • SP-284-028 - ELECTRICAL SYSTEM:SOFTWARE: Mack truck: there is a software update. *rm
  • SC-0346 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Mack trucks: the battery box lid may come off when stepping on the step. *rm
  • SB-214-024 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm
  • SB-373-010 - SERVICE BRAKES, AIR:ANTILOCK: Mack trucks: the clutch pedal can rub agains the anti-lock brake harness causing the malfunction light to go on. *rm
  • PI-0695 - POWER TRAIN:MANUAL TRANSMISSION: Mack truck: the oil slinger threads on the input shaft of the transmission were threaded incorrectly and could cause leakage in the area. *rm
  • SB-465-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mack trucks: there are new revised torque procedures to prevent the bull gear mounting screws from loosening. *rm
  • SB-258-021-2 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: Mack: diesel exhaust fluid pump, repair. On certain trucks, repairs has been authorized on diesel exhaust fluid (def) pump. The only exception for this procedure is to replace heating bracket on def pump which is not a serviceable compon
  • SP-645-641 - STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS: Mack: power steering hose, replacement. A blue silicone heater hose was incorrectly substituted and installed on return side of power steering system for power steering cooler during production. Need to replace hoses and power steering f
  • TB-284-021 - ELECTRICAL SYSTEM:SOFTWARE: Mack: engine ecu reprogramming. The mack mp7 and mp8 with multiple engine enhancements will have new software. The egr mass flow, and aftertreatment doser and nox sensor are included in the enhancement. *pe
  • SP-284-027 - ELECTRICAL SYSTEM:SOFTWARE: Mack truck: engine ecm and acm software updates. Enhancements are available for the engine control module (ecm) and aftertreatment control module (acm). Does not apply to mack trucks australia. Models mru, leu, gu, chu, cxu. No model y
  • FSB-234-009 - FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:MOUNTING: Mack truck: fuel tank mounting. Fuel tank straps over time may lose torque and allow the fuel tank to rotate. When this occurs, the filler neck can become inaccessible and difficult to fill the tank with fuel. Models chu, cxu, gu, td.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.