120913

Service Bulletin Details

Public Details for: 120913

State inspection and emission (i/m) test fails due to an invalid vin number. The customer of an affected vehicle may fail to pass an i/m test due to a non-compliant 17digit vehicle identification number (vin) stored in the dme (digital moto


- 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 -

Page 1 of 2
SI B12 09 13
Engine Electrical Systems
November 2013
Technical Service
SUBJECT
State Inspection and Emission (I/M) Test Fails Due To an Invalid VIN Number
MODEL
E46
E53
Produced to 12/2006
E83
E85
E86
Produced to 11/2007
SITUATION
The customer of an affected vehicle may fail to pass an I/M test due to a non-compliant 17digit vehicle identification number (VIN) stored in the DME (Digital Motor Electronic). The
VIN read out and displayed on the state test printout does not match the actual VIN of the
vehicle.
CAUSE
If the DME was reprogrammed using the previously available BMW service equipment (e.g.,
Progman, GT1), it is possible that only the last 7 digits of the VIN were entered into the DME, and
positions 4 through10 may only contain default characters.
For example: The state I/M tester or OBD scan tool may read out WBAAA00000A123456 instead
of the correct full 17-digit VIN, WBAZZ03492A123456.
CORRECTION
Reprogram the DME using only the most current version of ISTA/P. This will rewrite the correct
17-character VIN, which is read out directly from the vehicle itself, into the DME
Using ISTA/D, the VIN correction can be verified by viewing the DME identification page.
WARRANTY INFORMATION
The repair described in this bulletin is covered under warranty, regardless of time or mileage.
Reimbursement will be via normal claim entry utilizing the following information:
Defect Code:
85 10 02 15 NA
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15... 12/6/2013
Page 2 of 2
E46, E53, E83, E85
Labor Operation:
Labor Allowance:
Description:
12 14 715
Refer to KSD2
Programming DME (includes vehicle
test and charging the battery)
Refer to KSD2
Programming DME (includes vehicle
test and charging the battery)
or
E86 Only
12 14 710
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number,
which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the
“Search” button, and then enter the applicable flat rate labor operation in the FR code field.
[ Copyright ©2013 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15... 12/6/2013


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.