IS-19084
Service Bulletin Details
Public Details for: IS-19084
Accessory air filter replacement replaces 642192
- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2019
| 2019 PREVOST H3-41 |
| 2019 PREVOST H3-45 |
| 2019 PREVOST H3-45 VIP |
| 2019 PREVOST X3-45 |
| 2019 PREVOST X3-45 COMMUTER |
| 2019 PREVOST X3-45 VIP |
Models from 2018
| 2018 PREVOST H3-41 |
| 2018 PREVOST H3-45 |
| 2018 PREVOST H3-45 VIP |
| 2018 PREVOST X3-45 |
| 2018 PREVOST X3-45 COMMUTER |
| 2018 PREVOST X3-45 VIP |
Models from 2017
| 2017 PREVOST H3-41 |
| 2017 PREVOST H3-45 |
| 2017 PREVOST H3-45 VIP |
| 2017 PREVOST X3-45 |
| 2017 PREVOST X3-45 VIP |
Models from 2016
| 2016 PREVOST H3-41 |
| 2016 PREVOST H3-45 |
| 2016 PREVOST H3-45 VIP |
| 2016 PREVOST X3-45 |
| 2016 PREVOST X3-45 VIP |
Models from 2015
| 2015 PREVOST H3-41 |
| 2015 PREVOST H3-45 |
| 2015 PREVOST H3-45 VIP |
| 2015 PREVOST X3-45 |
| 2015 PREVOST X3-45 VIP |
Models from 2014
| 2014 PREVOST H3-41 |
| 2014 PREVOST H3-45 |
| 2014 PREVOST H3-45 VIP |
| 2014 PREVOST X3-45 |
| 2014 PREVOST X3-45 VIP |
Instruction Sheet IS-19084 Accessory air filter replacement Replaces 642192 H Series from E-2566 X Series from E-5590 First Release 05-22-2020 MATERIAL Kit #140259 includes the following parts: Part number Description Qty 140219 BRACKET, AIR FILTER 1 501312 A STB 1/4PMX1/8PF 1 501332 A 90 1/4PMX1/4PF 1 501527 A TEE 3/8PFX3/8PFX3/8PF 1 501749 A ST 1/4PMX3/8PM 1 501894 TEE 1/4PM x 1/4PF x 1/4PF 1 502841 NUT HEX NYRT NX500 M5-0.8 2 640031 AIR FILTER, PNEUMATIC 1 Writer: FLIS-19084 Page 2 / 5 640488 VALVE, EMERGENCY AIR, FILL 1 641331 FP ST #6 X 1/4PM 1 992086 CLAMP HOSE CT CAILLAU 32-52 1 FI-19084 Feuille d’instructions 1 IS-19084 Instruction Sheet 1 NOTE Material can be obtained through regular channels. Writer: IS-19084 Page 3 / 5 PROCEDURE DANGER Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the ignition switch to the OFF position and trip the main circuit breakers equipped with a trip button. On Commuter type vehicles, set the battery master switch (master cut-out) to the OFF position. Lock out & Tag out (LOTO) must be performed during set-up, maintenance or repair activities. Refer to your local procedure for detailed information regarding the control of hazardous energy. 1. Release accessory air pressure. 2. Locate the accessory air filter in the front service compartment. 3. Remove air lines to/from filter. FIGURE 1 4. Remove filter mounting screws. FIGURE 2 Writer: IS-19084 Page 4 / 5 5. Remove filter. Keep as reference for fitting arrangement. FIGURE 3 6. Using removed filter as a reference, assemble a similar fitting arrangement on the new filter.Fitting orientation may vary by model. FIGURE 4: FITTING ARRANGEMENT (TYPICAL). ORIENTATION MAY VARY BY MODEL. Writer: IS-19084 Page 5 / 5 7. Transfer any additional fittings from the original arrangement. Use 680098 Loctite 567 liquid Teflon on fittings. FIGURE 5 8. Install the new filter. FIGURE 6 9. Check for any leaks. 10. Confirm proper tank pressure and proper operation of accessories. PARTS / WASTE DISPOSAL Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/ Federal) Writer: