20-034 INC
Service Bulletin Details
Public Details for: 20-034 INC
Informational communication (inc) when replacing united brand shade motor with mcd motor, the united shad bracket requires modification to fit the mcd motor.
- 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2011
2011 ENTEGRA ANTHEM |
2011 ENTEGRA ASPIRE |
2011 ENTEGRA CORNERSTONE |
2011 ENTEGRA INSIGNIA |
Models from 2010
2010 ENTEGRA ANTHEM |
2010 ENTEGRA ASPIRE |
2010 ENTEGRA CORNERSTONE |
2010 ENTEGRA INSIGNIA |
Models from 2009
2009 ENTEGRA ANTHEM |
2009 ENTEGRA INSIGNIA |
UNITED TO MCD SHADE MOTOR BRACKET MODIFICATION Publication Date: Bulletin Type: INC Bulletin #(s): 20-034 Make(s): Job Code(s): N/A Model(s): Flat Rate(s): N/A Model Year(s): November 2020 Entegra Coach Cornerstone, Anthem, Aspire, Insignia 2009, 2010, 2011, 2012, 2013, 2014, 2015 Incident: When replacing United brand shade motor with MCD motor the United shade bracket needs to be modified to fit the MCD motor. Affected Units: All units with United Shade brand shades installed. Parts Kit #: N/A Parts Kit: Misc. Tools & Supplies: Parts Return Information: Parts Kit Contents: N/A Phillips screwdriver, Cutting plier, Countersink bit, 1/8” drill bit, Drill, 2 ea.#5-20 x 3/8 Phillips Flat Head screws. None INSPECTION Confirm unit has United Shade brand shades Installed. INC 20-034 Motor Bracket Modification November 2020 Page 1 of 5 INSTRUCTIONS Tools and hardware you need 1. Phillips screwdriver 2. Cutting plier 3. Countersink bit 4. 1/8-in drill bit 5. Drill 6. #5-20 x 3/8 Phillips Flat Head screws (2) Step 1- Take the existing red motor out by removing the screws. INC 20-034 Motor Bracket Modification November 2020 Page 2 of 5 Step 2- Remove the headplate on MCD motor by removing 2 screws. Step 3- Use the cutting pliers to cut 4 knobs. INC 20-034 Motor Bracket Modification November 2020 Page 3 of 5 Step 4- Place the headplate back onto the motor. You should have a flat surface now. Step 5- You will need to drill 2 new holes on the bracket to mount the MCD motor. Mark the hole location on the bracket. These two holes should be perpendicular to the existing holes. Use the countersink to deburr the holes. INC 20-034 Motor Bracket Modification November 2020 Page 4 of 5 Step 6- Use the 2- #5-20 x 3/8 Phillips Flat Head screws to mount the MCD motor on the bracket. 972.548.1850 mcdinnovations.com 3303 North McDonald St. McKinney, TX 75071 Jayco’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by Jayco in our sole discretion. Jayco reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. Jayco designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. Jayco makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact Jayco directly when attempting to pursue remedies under state or federal law. Jan. 2019. 903 South Main Street • P.O. Box 460 • Middlebury, IN 46540 INC 20-034 Motor Bracket Modification November 2020 Page 5 of 5