Chrysler 300 2006

• Recall 107918 [USA]: These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. an inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Chrysler (fca us llc) expanded the affected population to include 73,712 2005-2009 ram 2500 trucks produced at the st. Louis north assembly plant. With this change, chrysler is recalling certain model year 2004-2008 ram 1500, 2005-2009 ram 2500, 2006-2009 ram 3500, 2007-2010 ram 3500 cab chassis, 2008-2010 ram 4500 and 5500 cab chassis, 2004-2009 dodge durango, 2007-2009 chrysler aspen, 2007-2012 jeep wrangler, 2008-2012 dodge challenger, 2005-2008 dodge magnum, 2005-2012 chrysler 300, 2006-2012 dodge charger, 2005-2011 dodge dakota, and 2006-2009 mitsubishi raider vehicles originally sold, or ever registered, in al, ca, fl, ga, hi, la, ms, sc, tx, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, chrysler is also recalling 2004-2008 ram 1500, 2005-2009 ram 2500, 2006-2009 ram 3500, 2007-2009 ram 3500 cab chassis, 2008-2009 ram 4500 and 5500 cab chassis, 2004-2009 dodge durango, 2007-2009 chrysler aspen, 2007-2009 jeep wrangler, 2008-2009 dodge challenger, 2005-2008 dodge magnum, 2005-2009 chrysler 300, 2006-2009 dodge charger, 2005-2009 dodge dakota and 2006-2009 mitsubishi raider vehicles originally sold, or ever registered, in az, ar, de, washington d.C., il, in, ks, ky, md, mo, ne, nv, nj, nm, nc, oh, ok, pa, tn, va, and wv, or "zone b." lastly, unless included in "zone a" or "zone b" above, chrysler is recalling certain 2005-2008 ram 2500, 2006-2008 ram 3500, 2007-2008 ram 3500 cab chassis, 2008 ram 4500 and 5500 cab chassis, 2004-2008 dodge durango, 2007-2008 chrysler aspen, 2007-2008 jeep wrangler, 2008 dodge challenger, 2005-2008 dodge magnum, 2005-2008 chrysler 300, 2006-2008 dodge charger, 2005-2008 dodge dakota, and 2006-2008 mitsubishi raider vehicles originally sold, or registered, in ak, co, ct, id, ia, me, ma, mi, mn, mt, nh, ny, nd, or, ri, sd, ut, vt, wa, wi, and wy.
  chrysler will notify the chrysler, dodge, jeep and ram owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on march 27, 2017. Owners may contact chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is s43. Note: this recall supersedes recall 14v-7700.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114693 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Chrysler (fca us llc) is recalling certain model year 2005-2009 dodge ram 2500, 2004-2008 dodge ram 1500 and durango, 2006-2009 dodge ram 3500, 2008-2010 dodge ram 4500 and 5500, 2007-2008 chrysler aspen, 2005-2010 chrysler 300, 300c, 300s, and srt8, 2006-2010 dodge charger, 2005-2008 magnum, 2005-2011 dodge dakota, and 2006-2009 mitsubishi raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
  chrysler will notify the affected chrysler and dodge owners and mitsubishi will notify the affected raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for chrylser on june 8, 2015. The recall for mitsubishi started on june 24, 2015. Chrysler and dodge owners may contact chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is r25. Note: this recall supersedes recall 14v817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 51300 [USA]: This can result in a decrease of braking force and the potential for an engine compartment fire.
  Certain passenger vehicles equipped with 2.7 liter engines and mk25e braking systems may exhibit inadequate clearance between the rear brake tubes and the exhaust gas recirculation tube. Contact between the brake tubes and exhaust gas recirculation tube over an extended period of time may cause the brake tubes to wear through and cause a brake fluid leak.
  dealers will inspect the rear brake tubes for damage and replace them free of charge. A clip will also be installed to secure the brake tubes to the right front shock tower to maintain proper clearance to the exhaust gas recirculation tube. The recall began on june 26, 2006. Owners may contact daimlerchrysler at 1-800-853-1403.
  daimlerchrysler recall no. F18. Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 59283 [USA]: If this occurs and the parking brake is not applied, the vehicle may roll away and cause a crash without warning.
  On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. If the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
  dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft is retained in the proper position. The recall began on november 28, 2005. Owners may contact daimlerchrysler at 1-800-853-1403.
  daimlerchrysler recall no. E14.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236; (tty:1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall R/2015/180 [UK]: Driver side airbag may fail to deploy correctly
  The driver airbag inflator housing may rupture during normal airbag deployment events and metal fragments could injure components. This is more likely to occur if the vehicle has been exposed to high levels of absolute humidity for extended periods of time.
  on affected vehicles replace the driver's air bag inflator.

  Show Content

• Recall 2016265 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the airbag inflator. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2015228 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2015-003. Correction: dealers will replace airbag inflators. All vehicles having received a replacement inflator as part of the previous special service campaign will have a replacement inflator installed.

  Show Content

• Recall 2015093 [Canada]: Airbag
  Fiat chrysler automobiles (fca) canada is conducting a voluntary safety improvement program involving takata driver and/or passenger airbag inflators installed in certain vehicles that were originally sold or ever registered in certain high humidity areas of the united states. Fiat chrysler automobiles (fca) will replace the driver and/or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in florida, hawaii, puerto rico, and the u.S. Virgin islands should contact a fiat chrysler automobile (fca) dealer. This action is not being conducted under the requirements of the motor vehicle safety act. Note: for the 2003 model year dodge ram, only the passenger side inflator would need replacement. Additional note: this special service campaign was replaced by recalls 2015094 and 2015228. Please see these recalls for more information: click here for more information on the 2015094 recall click here for more information on the 2015228 recall

  Show Content

• Recall 2015003 [Canada]: Airbag
  Chrysler canada is conducting a voluntary safety improvement campaign concerning the driver's airbag inflator on certain vehicles equipped with takata airbags. Chrysler canada will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the motor vehicle safety act. Note: this special service campaign was replaced by recall 2015228. Please see recall 2015228 for more information: click here for more information

  Show Content

• Recall 2006102 [Canada]: Brakes
  On certain vehicles equipped with a 2.7l engine, the exhaust gas recirculation (egr) tube may contact the brake tubes, which may result in a brake fluid leak and potential engine compartment fire. A brake fluid leak may also result in extended stopping distances. Correction: dealers will inspect the brake tubes for damage and replace if necessary. A clip will also be installed to secure the brake tubes to the right front shock tower in order to maintain proper clearance to the egr tube.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Chrysler 300 2006 as well as their FCC IDs if available

• RHK-CHY-9514: 2005-2009 Chrysler 300 / 4-Button Remote Head Key / PN: 5179514AB / KOBDT04A (OEM)
  FCC ID: KOBDT04A

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

I here to report what seems to be an on-going issue with the older model chrysler 300's. I have an 2006 and just recently started smelling gas fumes or an gas odor inside my car. I had a mechanic look at the problem. He assumes it was a cracked or damaged seal. He took the backseat out and looked. The ring was intact but the fuel filter had a small crack in it. We fixed it and thought the problem was over. He said the car would have a heavy fuel smell for a couple of days but would go away once the car was aired out. 3 days go by and though the fumes remained. Now,i see that gas isactually leaking from the underside of the rear passenger side. And the smell is still there. I am taking the car to another repair shop to do a more through exam of the car. Leaking gas should be the least of my problems.

Every time i fill my car with gas i get a gas smell inside my car and garage for the next few day. I call about a recall for my car and was told that my car was too old to be serviced at the dealership where i bought it.

Every time i fill my car with gas i get a gas smell inside my car and garage for the next few day. I call about a recall for my car and was told that my car was too old to be serviced at the dealership where i bought it.

* [xxx] * [xxx] * [xxx] * [xxx] * [xxx] * [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

* [xxx] * [xxx] * [xxx] * [xxx] * [xxx] * [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

I was hit from behind on freeway by drunk driver and pushed into side wall on highway. In the process my seatbelt unlocked and none of the air bags deployed even though he hit me going close 100mph.*dt*jb*dt the consumer provided photos. *tr

I was hit from behind on freeway by drunk driver and pushed into side wall on highway. In the process my seatbelt unlocked and none of the air bags deployed even though he hit me going close 100mph.*dt*jb*dt the consumer provided photos. *tr

I went to the gas station, 2-ish mile drive and came back home. About 20 minutes later we decided to go see my mother in law, 34 highway miles away. Cool, so we go, everything is fine, beastie (that's the name of my 2006 chrysler 300), is running good, my husband and 3yr old are jammin out to metallica, and we get to my mother in laws house.. Stay a couple hours and decided to head home.. So we say bye ect ect.. We get about 9.5 miles down our 34 mile ride home... Aww crap, there is a tractor on the road, so we go to pass him... Or so we thought... Make sure coast is clear, turn on blinker and step on the gas petal more firmly.. Ok in the other lane.. And bam!! Car dies in motion at 60 mph!! My husband just casually says "hey babe, i think the car just died" and i look like "haha whatever" and i couldn't believe it.. So we pull over and try to get it started, had my mil come jump us.. An hour later and we still don't have beastie started.. No clicking, no nothing.. So unfortunately beastie had to sit on the side of the road until the next day... The next day we got her towed to my mils house... That was 3 days ago... And beastie still hasn't started up for me...

I went to the gas station, 2-ish mile drive and came back home. About 20 minutes later we decided to go see my mother in law, 34 highway miles away. Cool, so we go, everything is fine, beastie (that's the name of my 2006 chrysler 300), is running good, my husband and 3yr old are jammin out to metallica, and we get to my mother in laws house.. Stay a couple hours and decided to head home.. So we say bye ect ect.. We get about 9.5 miles down our 34 mile ride home... Aww crap, there is a tractor on the road, so we go to pass him... Or so we thought... Make sure coast is clear, turn on blinker and step on the gas petal more firmly.. Ok in the other lane.. And bam!! Car dies in motion at 60 mph!! My husband just casually says "hey babe, i think the car just died" and i look like "haha whatever" and i couldn't believe it.. So we pull over and try to get it started, had my mil come jump us.. An hour later and we still don't have beastie started.. No clicking, no nothing.. So unfortunately beastie had to sit on the side of the road until the next day... The next day we got her towed to my mils house... That was 3 days ago... And beastie still hasn't started up for me...

Common OBD-II Error Codes

• U0199 [3] Lost Communication With "Door Control Module A"
• U0200 [3] Lost Communication With "Door Control Module B"
• P361A [1] P361A
• B0000 [1] ISO/SAE Reserved
• P0404 [1] Exhaust Gas Recirculation Circuit Range/Performance
• P0405 [1] Exhaust Gas Recirculation Sensor A Circuit Low
• P0406 [1] Exhaust Gas Recirculation Sensor A Circuit High
• P0573 [1] Cruise Control/Brake Switch A Circuit High
• P2112 [2] Throttle Actuator Control System - Stuck Closed
• P1521 [2] IMRC Input Error (Bank 1)
• P0652 [1] Sensor Reference Voltage "B" Circuit Low
• P0340 [1] Camshaft Position Sensor Circuit Malfunction (Bank 1)
• P2127 [1] Throttle/Pedal Position Sensor/Switch "E" Circuit Low
• C121C [1] C121C
• P0303 [1] Cylinder 3 Misfire Detected
• P0457 [1] Evaporative Emission Control System Leak Detected
• P0037 [1] HO2S Heater Control Circuit Low (Bank 1 Sensor 2)
• P0058 [1] HO2S Heater Control Circuit High (Bank 2 Sensor 2)
• P0131 [1] 02 Sensor Circuit Low Voltage (Bank I Sensor I)
• P0132 [1] 02 Sensor Circuit High Voltage (Bank I Sensor 1)
• P0133 [1] 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)
• P0138 [1] 02 Sensor Circuit High Voltage (Bank I Sensor 2)
• P0151 [1] 02 Sensor Circuit Low Voltage (Bank 2 Sensor 1)
• P0153 [1] 02 Sensor Circuit Slow Response (Bank 2 Sensor 1)
• P0159 [1] 02 Sensor Circuit Slow Response (Bank 2 Sensor 2)