Ducati Hypermotard 2008
Vehicle Details: Recalls, Consumer Complaints, Service Bulletins
Use the box here to look up VINs from DUCATI as well as other manufacturers
Sub-models: - Hypermotard 1100 - Hypermotard 1100s -
-
Where is the 2008 DUCATI Hypermotard produced?
- The 2008 DUCATI Hypermotard is produced in Bologna, Italy.
-
Are there recalls for the 2008 DUCATI Hypermotard?
- There are 4 recall(s) for the 2008 DUCATI Hypermotard, additional information is below.
Recall 71360 [USA]: If the engine stops while the motorcycle is being driven, it could increase the risk of a crash.
Recall 2008104 [Canada]: Other
Recall 2007327 [Canada]: Electrical
Recall 2008104 [Canada]: Other
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- TTB-24-001Rev 3 - VEHICLE SPEED CONTROL: Tips & tricks revision 03 summary. Applicability: multistrada-racing exhaust applicability. Hypermotard-possible oil seep, loose handlebar feel, gearchange lever pin, standard faring elements characteristics.
- TTB-24-001Rev 2 - EXTERIOR LIGHTING: Tips & tricks revision 02 summary. Applicability: multistrada-front fork wiring, rear shock, and fuel level and range indication. Hypermotard-exhaust heat guard hardware pitting. Scrambler-cosmetic headlight defect. All models-pre-delive
- SRV-SRB-24-001 - SUSPENSION: Procedure for assessing front fork oil leaks. Applicability: all models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technic
- SRV-SRB-23-037 - POWER TRAIN: Finial drive chain maintenance precautions. Applicability: all models and model years (except xdiavel). This service bulletin replaces and cancels the previous bulletins: srv-srb-18-030 published on 05/11/2018, srv-srb-19-046 published on
- SRV-SRB-23-036 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding. Applicability: all models. This service bulletin replaces and cancels the previous bulletin srv-srb-20-014 published on 4/17/2020. It provides dealers and service managers with needed info
- SRV-SRB-23-018R1 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine_rev.01. Applicability: all models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant an
- SRV-SRB-23-031 - ENGINE AND ENGINE COOLING: Precautions to follow during crankcase cleaning. Applicability: all models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcas
- SRV-SRB-23-018 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine. Applicability: all models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes s
- SRV-SRB-22-038 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all models. This service repair bulletin provides dealers and service managers a provides a summary of the updates available for motorcycles that have customer concerns about a slight e
- SRV-TSB-22-010 - ENGINE AND ENGINE COOLING: Cr235 a?? Checking proper configuration of options installed on the motorcycle. Applicability: all models (usa & mex country versions only) . This technical service bulletin informs dealers and service managers of required bbs electronic c
- SRV-SRB-22-031 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all us models. This service bulletin provides a summary of the updates available for motorcycles that have customer concerns about a slight elongation, over time and use, of rear brake
- SRV-SRB-22-020 - ENGINE AND ENGINE COOLING: Service operation manual update 2022. Applicability: all models, all model years. This service bulletin informs dealers and service manages of service and operations updates to the operations manual.
- TTB-22-001_R 01 - SERVICE BRAKES, HYDRAULIC: Tips & tricks v 01 - applicability: all models. Pg 13 : possible damage to water pump gear oil seal. Diavel 1260 (all model versions). Pg. 15: indication for replacement of brake hoses under warranty. Multistrada v4 pp, pg. 41, possible pre
- SRV-ESB-22-002 - ELECTRICAL SYSTEM: Rules for battery replacement under warranty. Applicability: all models, all years. This electronic service bulletin replaces and cancels srv-esb-19-001, published january 17, 2019. It provides dealers and service managers the correct repl
- TTB-20-001 r25 - ENGINE AND ENGINE COOLING: Tips & tricks v25 - applicability: all models. Pg 12 : update of engine oil filter cartridge tightening torque. Multistrada v4 (all model versions). Pg. 38: possible incorrect diameter of the silencer front or rear manifold in the racing ex
- Ducati Service - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Pre-delivery check list.
- TTB-20-001 rev20 - ENGINE AND ENGINE COOLING: Tips & tricks. Applicability: all models, all model years, p. 10-error P0314 validation: high misfire with risk of damaging the catalytic converter; p.11-control unit reprogramming. Multistrada v4s all model years, p.30-right-hand switch b
- SRV-TTB-21-001v3 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: Tips & tricks ver 03. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics i
- SRV-TTB-20-001 r - ELECTRICAL SYSTEM: Tips & tricks ver 12. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics ra
- SRV-SRB-21-013 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Rideability complaints. Applicability: all models. The purpose of this service bulletin is distribute a questionnaire to help dealers and service managers collect detailed information about any rideability complaints for models equipped w
- SRV-SRB-20-014 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding - applicability: all vehicle models, all years. This service bulletin provides guidance for front brake system bleeding. It includes a "guided diagnosis" attachment, which outlines the seque
- SRV-ESB-20-001 - ELECTRICAL SYSTEM: Ducati immobilizer systems - applicability: all vehicles with electronic coded keys. This electronic service bulletin replaces and cancels the bulletin srv-esb-18-004 published on may 3rd, 2018 and provides information regarding the immobi
- SRV-SRB-19-045 - EQUIPMENT: Scheduled maintenance check list update - applicability: all models. This service bulletin provides dealers and service managers with scheduled maintenance updates specific to each of ducati's models. This includes updated mileage and time
- SRV-SRB-19-046 - POWER TRAIN: Final drive chain maintenance precautions - applicability: all models and model years (except xdiavel). The purpose of this service bulletin is to further inform dealers and service managers of proper maintenance to ensure optimal performa
- SRV-SRV-19-035 - ENGINE AND ENGINE COOLING: Tiltwatch indicator for engine shipments - applicability: all models, all years. This service repair bulletin informs dealers and service managers about the "tiltwatch" indicator being implemented on engine packages. It also provides inst
- SRV-ESB-18-004 - ENGINE (PWS): Immobilizer systems - this electronic service bulletin supersedes srv-esb-16-002 published 10/06/2016. It contains updated system information regarding ducati immobilizer systems (engine start lock systems) for the listed year models. The
- SRV-SRB-16-017 - EQUIPMENT: Transparent maintenanceposter and scheduled maintenance checklist update - this service bulletin contains ducati service minimum requirements. It includes maintenance checklists and intervals, as well as illustrations for display.
- SVC-09-009 - STEERING:GEAR BOX:SHAFT SECTOR: Ducati motorcycle: the gear selector mechanism applicable to all ducati model motorcycles equipped with 2v/4v engines has been revised due to difficulty in selecting a gear and gear selector was set incorrectly. No model years listed.
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20100731 |
My motorcycle, 2008 ducati s2r1000 (not an option on the next vehicle selector), has a plastic gas tank which has begun to expand. The outside dimensions of the tank have increased and it now does not sit correctly in the frame, and it presses against the ignition switch. Previously it opened and closed without problems, now i have to wedge it against the ignition switch to close it. The rubber mounts no longer sit on the frame which makes the gas tank sit to one side. I have not significantly modified my motorcycle except for an aftermarket exhaust and some cosmetic changes. I have made no modifications to the fuel tank, fueling system or fuel pump. I took the bike to the dealer who submitted a claim to ducati north america (the importer/factory) and they noted they would monitor it for replace. I am very concerned as to the safety of this motorcycle now. The tank's swelling has caused it sit incorrectly and have large bubbles. If the tank swells enough, it will split open and i am concerned this will happen while i am riding. *tr
| No | No | N | None | None | 20090301 |
Motorcycle stalls when coming to a stop or when pulling in the clutch. Has been to the shop 11 times and they have replaced , ecu, exhaust valve guide seals, and numerous items. Dealer can't fix the problem. It's unsafe when it just dies. It's a known problem with this bike but ducati won't do anything about it. *tr
| No | No | N | None | None | 20080712 |
On july 11, 2008 i purchased a new ducati hypermotard 1100 motorcyle. Approximately 2 days later it started stalling upon initial start up. It would restart and idle rough. Then after moving off to my first stop (intersection ,light etc.) it would stall again. Once motorcycle was fully warmed up it wouldn't stall as much. I took the motorcycle to dealer where purchased and they reset the tps(throttle position sensor) and raised the idle. The bike would still stall out especially the warmer the outside temperature was. I brought bike back to dealer and they replaced the oxygen sensor and oil temperature sensor. The bike still stalls . It seems to stall more frequently when it is warm out. The warmer it is the worse it is. It will stall upon start up and then at the next few stops (intersection, light, etc.). Most times it will stall with no warning. Upon some research of my own i am not the only one with this problem. Most people are either living with it; or replacing the exhaust and putting on a performance ecu (electronic control unit) that comes with the exhaust. After speaking to another local dealer they told me the same thing. The only way to fix the stalling is replacing the ecu with a performance one. Which makes the motorcycle emission illegal. Ducati seems to know about this problem; because they have all sorts of test and forms for the dealers to fill out and do. But no remedy to the stalling. As of today october 16, 2008 the motorcycle still stalls out. *tr
Common OBD-II Error Codes
- P0314 [1] Single Cylinder Misfire (Cylinder not Specified)