Ducati Monster-696 2008

Vehicle Details: Consumer Complaints, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2008 DUCATI MONSTER-696, manufacturered by Ducati Motor Holding S.p.a. .

ManufacturerKnown WMI(s)Fuel Type
DUCATIML0 ML0
DUCATI VIN Decoder

Use the box here to look up VINs from DUCATI as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2008 DUCATI MONSTER-696 produced?
     - The 2008 DUCATI MONSTER-696 is produced in Bologna Emilia-romagna, Italy.
  • What is the GVWR of a 2008 DUCATI MONSTER-696?
     - The 2008 DUCATI MONSTER-696 has a GVWR of Class 1A: 3,000 lb or less (1,360 kg or less) lbs.
  • How much horsepower does the 2008 DUCATI MONSTER-696 have?
     - The 2008 DUCATI MONSTER-696 has 111 horsepower.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SRV-SRB-24-001 - SUSPENSION: Procedure for assessing front fork oil leaks. Applicability: all models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technic
  • SRV-SRB-23-037 - POWER TRAIN: Finial drive chain maintenance precautions. Applicability: all models and model years (except xdiavel). This service bulletin replaces and cancels the previous bulletins: srv-srb-18-030 published on 05/11/2018, srv-srb-19-046 published on
  • SRV-SRB-23-036 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding. Applicability: all models. This service bulletin replaces and cancels the previous bulletin srv-srb-20-014 published on 4/17/2020. It provides dealers and service managers with needed info
  • SRV-SRB-23-018R1 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine_rev.01. Applicability: all models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant an
  • TTB-23-001 rev07 - ELECTRICAL SYSTEM: Tips and tricks revision 7 summary. Range and motor error codes for the multistrada; assembly procedure of the brake caliper mounting plate when refitting the rear wheel for the monster; oil seal install instructions on dry clutch housing f
  • SRV-SRB-23-031 - ENGINE AND ENGINE COOLING: Precautions to follow during crankcase cleaning. Applicability: all models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcas
  • SRV-SRB-23-018 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine. Applicability: all models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes s
  • SRV-SRB-22-038 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all models. This service repair bulletin provides dealers and service managers a provides a summary of the updates available for motorcycles that have customer concerns about a slight e
  • SRV-TSB-22-010 - ENGINE AND ENGINE COOLING: Cr235 a?? Checking proper configuration of options installed on the motorcycle. Applicability: all models (usa & mex country versions only) . This technical service bulletin informs dealers and service managers of required bbs electronic c
  • SRV-SRB-22-031 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all us models. This service bulletin provides a summary of the updates available for motorcycles that have customer concerns about a slight elongation, over time and use, of rear brake
  • SRV-SRB-22-020 - ENGINE AND ENGINE COOLING: Service operation manual update 2022. Applicability: all models, all model years. This service bulletin informs dealers and service manages of service and operations updates to the operations manual.
  • TTB-22-001_R 01 - SERVICE BRAKES, HYDRAULIC: Tips & tricks v 01 - applicability: all models. Pg 13 : possible damage to water pump gear oil seal. Diavel 1260 (all model versions). Pg. 15: indication for replacement of brake hoses under warranty. Multistrada v4 pp, pg. 41, possible pre
  • SRV-ESB-22-002 - ELECTRICAL SYSTEM: Rules for battery replacement under warranty. Applicability: all models, all years. This electronic service bulletin replaces and cancels srv-esb-19-001, published january 17, 2019. It provides dealers and service managers the correct repl
  • TTB-20-001 r25 - STRUCTURE: Tips & tricks v25 - applicability: all models. Pg 12 : update of engine oil filter cartridge tightening torque. Multistrada v4 (all model versions). Pg. 38: possible incorrect diameter of the silencer front or rear manifold in the racing ex
  • TTB-20-001 rev20 - SEATS: Tips & tricks. Applicability: all models, all model years, p. 10-error P0314 validation: high misfire with risk of damaging the catalytic converter; p.11-control unit reprogramming. Multistrada v4s all model years, p.30-right-hand switch b
  • SRV-TTB-21-001v3 - EQUIPMENT: Tips & tricks ver 03. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics i
  • SRV-TTB-20-001 r - SUSPENSION: Tips & tricks ver 12. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics ra
  • SRV-SRB-21-013 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Rideability complaints. Applicability: all models. The purpose of this service bulletin is distribute a questionnaire to help dealers and service managers collect detailed information about any rideability complaints for models equipped w
  • SRV-SRB-20-014 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding - applicability: all vehicle models, all years. This service bulletin provides guidance for front brake system bleeding. It includes a "guided diagnosis" attachment, which outlines the seque
  • SRV-ESB-20-001 - EQUIPMENT ADAPTIVE/MOBILITY: Ducati immobilizer systems - applicability: all vehicles with electronic coded keys. This electronic service bulletin replaces and cancels the bulletin srv-esb-18-004 published on may 3rd, 2018 and provides information regarding the immobi
  • SRV-SRB-19-045 - EQUIPMENT: Scheduled maintenance check list update - applicability: all models. This service bulletin provides dealers and service managers with scheduled maintenance updates specific to each of ducati's models. This includes updated mileage and time
  • SRV-SRB-19-046 - POWER TRAIN: Final drive chain maintenance precautions - applicability: all models and model years (except xdiavel). The purpose of this service bulletin is to further inform dealers and service managers of proper maintenance to ensure optimal performa
  • SRV-SRV-19-035 - EQUIPMENT: Tiltwatch indicator for engine shipments - applicability: all models, all years. This service repair bulletin informs dealers and service managers about the "tiltwatch" indicator being implemented on engine packages. It also provides inst
  • SRV-ESB-18-004 - ENGINE (PWS): Immobilizer systems - this electronic service bulletin supersedes srv-esb-16-002 published 10/06/2016. It contains updated system information regarding ducati immobilizer systems (engine start lock systems) for the listed year models. The
  • SRV-SRB-16-017 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Transparent maintenanceposter and scheduled maintenance checklist update - this service bulletin contains ducati service minimum requirements. It includes maintenance checklists and intervals, as well as illustrations for display.
  • SVC-09-009 - STEERING:GEAR BOX:SHAFT SECTOR: Ducati motorcycle: the gear selector mechanism applicable to all ducati model motorcycles equipped with 2v/4v engines has been revised due to difficulty in selecting a gear and gear selector was set incorrectly. No model years listed.
  • TSB-08-007 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Ducati motorcycle: heat guard retaining screw. It will become loosen and needs to be replaced on the right and left heat guards. *pe
  • TSB-08-008 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Ducati motorcycle: oil pressure sensor wiring. Possible contact between the horizontal cylinder exhaust pipe and the wiring cable of the oil pressure sensor. *pe
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Additional Error TextIn the Possible values section, the Numeric value before the : indicates the position in error and the values after the : indicate the possible values that are allowed in this position. Unused position(s): 7;
Body ClassMotorcycle - Street
Cooling TypeWater
EngineHP111
EngineHP_to122
Error Code4,14
Error Text4 - VIN corrected, error in one position only (indicated by ! in Suggested VIN), multiple matches found; 14 - Unable to provide information for some of the characters in the VIN, based on the manufacturer submission.
GVWRClass 1A: 3,000 lb or less (1,360 kg or less)
MakeDUCATI
MakeID568
ManufacturerDUCATI MOTOR HOLDING S.P.A.
Manufacturer Id1133
ModelMonster
ModelID2927
Model Year2008
Other Engine InfoTWIN CYLINDER 90 DEGREE
Plant Company NameDucati Motor Holding Spa
Plant CountryITALY
Plant StateEMILIA-ROMAGNA
Possible Values(7:ABCDEFGHLMNPRSTWY)
SeriesNaked Standard Bike
SuggestedVINZDM1RB!TX8B115086
VINZDM1RB5TX8B115086
Vehicle DescriptorZDM1RB5T*8B
Vehicle TypeMOTORCYCLE
Vehicle Documentation
[pdf] User Manual Owner's Manual Instructions
Cop DUCum 1098S 913 7 139 1B sito Ducati Monster 696 2008 2014 User Manuals Desmoheart v 1612181193 cdn shopify s files 1 0045 2545 7496 |||
Owner s manual DUCATI MONSTER 696 Use and maintenance manual E 696 1 E 2 Welcome to the world of Ducati enthusiasts We Notes E congratulate you on your excellent choice of motorcycle. Ducati Motor Holding S.p.A. cannot accept any liability We are sure that you will use your Ducati for lon...
lang:en score:27 filesize: 5.4 M page_count: 130 document date: 2008-12-12
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20100812

I purchased a 2008 ducati monster 695. It has 4,900 trouble-free miles, but the gas tank is now expanding. There are ripples forming on the sides of the tank and the key latch is now pressed up against the tank itself. *tr

NoNoN NoneNone20100617

My motorcycle has a plastic gas tank which has begun to expand. The outside dimensions of the tank have increased and it now does not sit correctly in the frame and it presses against the ignition switch. Previously it opened and closed without problems, now i have to wedge it against the ignition switch to close it. The rubber mounts no longer sit correctly on the frame. I have not modified my motorcycle and i have made no modifications to the fuel tank or fuel pump. I took the bike to the dealer who submitted a claim to ducati north america (the importer/factory) and they refused to replace the tank. I was not given a reason. I am very concerned as to the safety of this motorcycle now. The tank's swelling has made it so the handlebars do not turn correctly. If the tank swells enough, it will split open and i am concerned this will happen while i am riding. *tr

NoNoN NoneNone20100531

The plastic fuel tank on my ducati monster 695 is expanding, making it difficult to latch and secure properly. *tr

NoNoN NoneNone20100527

Fuel tank on my motorcycle swelling from ethanol. The model is a monster s4rs. *tr

NoNoN NoneNone20100517

Vehicle: 2008 ducati monster s4rs tricolore (motorcycle) issue: excessive expansion of the fuel tank causing material yield and fitment problems _______________________________________________________ 1) normal use of gas tank (refueling) over a period of two years. 2) fuel tank is: a) expanding (to the point of witnessing external cracks, ripples, and bubbles ) b) elongation of the fuel tank causes access to components under it from being accessed readily (as designed). C) condition is constant and getting progressively worse. D) rupture/leaking has not occurred, but is expected. E) considering this is a motorcycle with the fuel tank located in close proximity to the rider, a catastrophic failure would be expected. 3) motorcycle was: a) returned to the dealer for review, upon which a decision was made to replace the tank at the manufacture's expense. B) the manufacture will swap the defective tank for the replacement unit. *tr

NoNoN NoneNone20100315

The plastic fuel tank on my 2008 ducati monster s2r1000 (selected monster 696 as vehicle since s2r1000 was not an option) is swelling to the point it is rubbing against the ignition switch housing and no longer sits on the frame for proper support. This is a serious issue because of the fire risk if the tank were to wear all the way through and allow gasoline to spill onto my ignition wiring and hot engine. Obviously, a fuel leak occurring while riding the motorcycle could result in a crash, injury or death, and property damage. I also cannot lift the fuel tank as designed by ducati to service the motorcycle. I understand this is a problem affecting several ducati models from 2005 to present. My motorcycle was originally purchased in september 2008, currently has less than 700 miles on it, has not been modified , and, other than this serious defect, is in brand new condition. *tr

NoNoN NoneNone20090827

2008 ducati monster with fuel tank deformation. *tr

Common OBD-II Error Codes
  • P0314 [1] Single Cylinder Misfire (Cylinder not Specified)
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
ZDM1RB5TX8B1150862008Monster EMILIA-ROMAGNA, ITALY

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.