Honda Element 2003

• Recall 141601 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2003-2006 acura mdx, 2005-2012 rl, 2003-2007 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2006 cr-v, 2003-2011 element, 2007-2008 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began august 12, 2019. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are e5d and x5c.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 140814 [USA]: An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling specific 2003 acura 3.2cl, 2013-2016 ilx, 2013-2014 ilx hybrid, 2003-2006 mdx, 2007-2016 rdx, 2002-2003 3.2tl, 2004-2006, and 2009-2014 tl, 2010-2013 zdx and 2001-2007 and 2009 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2007 and 2010-2011 cr-v, 2003-2011 element, 2007 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
  honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began april 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is o41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is u40.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 128650 [USA]: An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
  Honda (american honda motor co.) is recalling certain 2003-2012 honda accord and pilot, 2010 accord crosstour, 2001-2011 civic, 2002-2011 cr-v, 2003-2004, 2006-2008 and 2011 element, 2007 and 2009-2013 fit, 2010-2012 insight, 2002-2004 odyssey, and 2012 ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
  honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began june 22, 2018. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are k1p, and m1o.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111872 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2003-2006 acura mdx, 2005-2011 acura rl, 2005-2006 honda cr-v, 2003-2011 element, 2007-2008 fit, 2003-2008 pilot, 2002-2004 odyssey, and 2006-2011 ridgeline vehicles originally sold, or that have ever been registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, honda is recalling certain model year 2003-2006 acura mdx, 2005-2008 acura rl, 2005-2006 honda cr-v, 2003-2008 element, 2007-2008 fit, 2003-2008 pilot, 2002-2004 odyssey, and 2006-2008 ridgeline vehicles originally sold, or that have ever been registered, in arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia, or "zone b." lastly, unless included in "zone a" or "zone b" above, honda is recalling model year 2002-2004 odyssey and model year 2003-2004 acura mdx, honda element, and honda pilot vehicles originally sold, or registered, in alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin, and wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began june 27, 2016. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are ka0, ka1, ka2, and ka3.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 118909 [USA]: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the passenger seat occupant or other occupants possibly causing serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2005 honda civic vehicles manufactured march 21, 2000, to january 20, 2005, 2001-2004 honda civic gx vehicles manufactured june 14, 2000, to august 19, 2004, 2003-2005 honda civic hybrid vehicles manufactured february 24, 2002, to january 18, 2005, 2003-2007 honda accord vehicles manufactured february 21, 2002, to august 28, 2007, 2002-2004 honda cr-v vehicles, 2002-2003 honda odyssey vehicles manufactured june 19, 2001, to july 12, 2003, 2003 acura mdx vehicles manufactured september 19, 2002, to june 19, 2003, 2003 honda element vehicles manufactured june 25, 2002, to july 31, 2003, and 2003 honda pilot vehicles manufactured november 26, 2001, to august 21, 2003. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
  honda will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are ju4, ju5, ju6, and ju7. Note: vehicles that have already received a replacement passenger air bag inflator as part of the recall remedy for an earlier campaign such as 14v353 or 14v700 (honda recall numbers s95, jh6, jh7, jh8, jh9, jj0, jj1, jj2, jj6, jm5 and jm6) are not included in this recall. However, this recall does supersede 13v132 and 14v349. Note: on december 18, 2015 honda informed nhtsa of an expansion of this recall to include certain model year 2004 honda cr-v vehicles in addition to additional model year 2003 cr-v vehicles.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107181 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2007 accord, 2001-2005 civic, 2001-2004 honda civic gx, 2003-2005 honda civic hybrid, 2002-2006 cr-v, 2003-2011 element, 2002-2004 odyssey, 2003-2008 pilot, 2006 ridgeline, 2003 acura 3.2cl, 2003-2006 acura mdx, and 2002-2003 acura 3.2tl vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
  honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Owners may contact acura customer service at 1-800-382-2238, select option 4. Note: vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to september 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after september 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: this recall fully supersedes recalls 08v-593, 09v-259, 10v-041, 11v-260, 14v-351 and 15v-153. Honda's numbers for this recall are jq9, jr0, jr1, jr2, jr3, jr4, jr5, jr6, jr7, and jr8.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113963 [USA]: In the event of a crash necessitating deployment of the passenger?s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
  American honda motor co. (honda) is recalling certain model year 2001-2005 honda civic, 2003-2004 civic cng and element, 2002-2005 cr-v, 2002-2004 odyssey, 2003-2005 accord, pilot, civic hybrid, and acura mdx, 2005 acura rl and 2006 honda ridgeline vehicles originally sold, or ever registered, in geographic locations associated with high absolute humidity. Specifically, vehicles sold, or ever registered, in alabama, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, u.S. Virgin islands, saipan, guam, and american samoa are addressed by this recall. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
  honda will notify owners, and dealers will replace the passenger side air bag inflator, free of charge. The recall began january 26, 2015. Owners may contact honda customer service at 1-800-999-1009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.Note: this recall supersedes safety recall 14v-353, with the exception of vehicles originally sold, or ever registered, in california.Those vehicles will continue to be addressed, and a free remedy provided, under that safety recall campaign.This recall also includes vehicles in the specific geographic areas listed above that were included within safety recalls 13v-132 and 14v-349.

  Show Content

• Recall 68544 [USA]: Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the park position can allow the vehicle to roll away, increasing the risk of a crash.
  Honda is recalling certain model year 2003 honda accord, civic two and four door, and model year 2003-2004 honda element vehicles. The interlock lever of the ignition switch may unexpectedly deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated.
  dealers will remove the original interlock pin and lever within the ignition switch, and replace them with new, designed components. This service will be performed free of charge. The safety recall began on october 7, 2010. Owners may contact honda at 1-800-999-1009.
  honda safety recall no. R44.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 85799 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2021024 [Canada]: Structure
  Issue: on certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (ontario, quebec, new brunswick, nova scotia, prince edward island, and newfoundland & labrador). Safety risk: a rear trailing arm that separates could cause a loss of control and increase the risk of a crash. Corrective actions: honda will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear trailing arm front mount bolts. If the vehicle passes the inspection, the dealer will apply corrosion protection and install support braces. Honda will offer to repurchase vehicles that do not pass the inspection. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.

  Show Content

• Recall 2019323 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: this is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

• Recall 2019117 [Canada]: Airbag
  Issue: on certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: this recall only affects certain vehicles that had a takata airbag inflator installed during a previous airbag recall or collision repair. Safety risk: in a crash where the airbag deploys, there could be an increased risk of injury. Corrective action: the company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

  Show Content

• Recall 2016249 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the airbag inflator. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2015225 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2014567. Correction: dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2014567 [Canada]: Airbag
  Honda canada is conducting a voluntary safety improvement campaign concerning the driver's airbag inflator on certain vehicles equipped with takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the motor vehicle safety act. Note: this special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: click here for more information

  Show Content

• Recall 2014242 [Canada]: Airbag
  On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: this recall is an expansion of recall 2013111. Honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2010264 [Canada]: Powertrain
  On certain vehicles the interlock lever of the ignition switch may wear prematurely, which can allow the interlock function to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the park position before rotating the ignition key to the off position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the park position can allow the vehicle to roll away, increasing the risk of a crash causing property damage and/or personal injury. Correction: dealers will replace the original interlock pin and lever within the ignition switch with updated versions.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Honda Element 2003 as well as their FCC IDs if available

• R-HON-S5T3: 2002-2011 Honda Civic Element / 3-Button Keyless Entry Remote / OUCG8D-344H-A (AFTERMARKET)
  FCC ID: OUCG8D-344H-A OUCG8D344HA
• OR-HON005: 2002-2011 Honda Civic Element / 3-Button Keyless Entry Remote / PN: 72147-S5T-A01 / OUCG8D-344H-A (OEM Refurb)
  FCC ID: OUCG8D-344H-A

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

• Ignition shift interlock investigation # EA09001

  On august 4, 2010, american honda motor co. (honda) submitted a defect information report (dir) to nhtsa regarding a ignition interlock defect in approximately 384,220 model year (my) 2003 honda accord and civic and my 2003 and 2004 honda element vehicles with automatic transmissions (recall 10v-364).In a september 22, 2010 supplemental dir, honda expanded the scope of the recall population based on manufacturing and complaint data.The total population for the complete recall is approximately 551,498 vehicles.The information listed in this closing report refers only to the subject vehicles, my 2003 accords with automatic transmissions.According to hondas dir, "under certain conditions the interlock lever of the ignition switch may unexpectedly deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the park position before rotating the ignition key to the off position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the park position can allow the vehicle to roll away, increasing the risk of a crash."hondas dealers will be instructed to inspect the ignition interlock switch and, if necessary, replace the original interlock pin and lever within the ignition switch and replace them with new, redesigned parts.This investigation is closed.
  

  Show Content

The subframe is rusted near the rear control arm, there is a danger of the control arm separating which can result in a crash. The vehicle was stationary when i discovered this as i was attempting to jack the car up to change a tire.

The subframe is rusted near the rear control arm, there is a danger of the control arm separating which can result in a crash. The vehicle was stationary when i discovered this as i was attempting to jack the car up to change a tire.

Rear trailing arms causing unsafe driving rear end unsafe over bumps

Rear trailing arms causing unsafe driving rear end unsafe over bumps

The door lock cylinders for the driver/passenger/tailgate will not accept a key to unlock the doors. The locks are immovable from the outside and inside, requiring a locksmith to open the doors or complete removal of the doors to safely enter and exit the vehicle. The key, when inserted into the lock in attempt to enter the vehicle, often will not release from the seized lock cylinder resulting in the key firmly lodged in the lock of the door, rendering it impossible then to drive the vehicle. The above mentioned cylinder locks are safety hazards for the following reasons: children and adults entering and exiting the vehicle may be prone to injury from oncoming traffic due to door cylinder locks not operating properly and causing the door to jam requiring forceful pressure to be applied from the interior and exterior of the vehicle in order for the door to open. Infants and elderly individuals incapable of the motor skills necessary to open doors and locks may be locked inside of the vehicle with uncontrollable in cabin temperatures resulting in excessive heat/cold for an extended amount of time that could result in injury or death. Quick and safe entry and exit to and from the vehicle is impossible, resulting in an increase of the probable instances of theft or damage to persons/property attempting to enter/exit the vehicle in less than perfectly safe conditions. The fee involved with servicing the replacement of this door lock cylinder is exorbitant. A quote from the dealership put me at $200.00 just for them to open the door panel and look at it. To replace the cylinder and re-key it would cost upwards of $400.00 more. $600.00 to replace a cylinder lock on a car door. There are many other 2003 honda element owners who have had this issue as well, often paying the money to have the cylinders replaced, only to have them fail again a year later.

The door lock cylinders for the driver/passenger/tailgate will not accept a key to unlock the doors. The locks are immovable from the outside and inside, requiring a locksmith to open the doors or complete removal of the doors to safely enter and exit the vehicle. The key, when inserted into the lock in attempt to enter the vehicle, often will not release from the seized lock cylinder resulting in the key firmly lodged in the lock of the door, rendering it impossible then to drive the vehicle. The above mentioned cylinder locks are safety hazards for the following reasons: children and adults entering and exiting the vehicle may be prone to injury from oncoming traffic due to door cylinder locks not operating properly and causing the door to jam requiring forceful pressure to be applied from the interior and exterior of the vehicle in order for the door to open. Infants and elderly individuals incapable of the motor skills necessary to open doors and locks may be locked inside of the vehicle with uncontrollable in cabin temperatures resulting in excessive heat/cold for an extended amount of time that could result in injury or death. Quick and safe entry and exit to and from the vehicle is impossible, resulting in an increase of the probable instances of theft or damage to persons/property attempting to enter/exit the vehicle in less than perfectly safe conditions. The fee involved with servicing the replacement of this door lock cylinder is exorbitant. A quote from the dealership put me at $200.00 just for them to open the door panel and look at it. To replace the cylinder and re-key it would cost upwards of $400.00 more. $600.00 to replace a cylinder lock on a car door. There are many other 2003 honda element owners who have had this issue as well, often paying the money to have the cylinders replaced, only to have them fail again a year later.

I'm concerned with the amount of rust under the vehicle. My element is from pennsylvania and they do use salt on the streets in the winter. Took car to mechanic and was told the car was very rusted underneath. Changing parts under the car is a difficult task due to the rest. Mechanic said it was cause car was driven in pennsylvania the cause is to how the roads are salted. I did read this is a serious problem in canada and other places and very dangerous but in america not as much. I'm wondering how i get this looked at by honda and the problem be fixed like other elements are being fixed or to see if it passes to have the unforced bracket put on.

I'm concerned with the amount of rust under the vehicle. My element is from pennsylvania and they do use salt on the streets in the winter. Took car to mechanic and was told the car was very rusted underneath. Changing parts under the car is a difficult task due to the rest. Mechanic said it was cause car was driven in pennsylvania the cause is to how the roads are salted. I did read this is a serious problem in canada and other places and very dangerous but in america not as much. I'm wondering how i get this looked at by honda and the problem be fixed like other elements are being fixed or to see if it passes to have the unforced bracket put on.

2003 honda element. Consumer writes in regards to passenger side airbag and ignition switch safety recall. *ld the consumer stated the vehicle was improperly repaired during the recall repair process. *js the consumer stated the manufacturer was contacted but, did not offer any assistance.*js *js

Common OBD-II Error Codes

• P2646 [3] A Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2647 [3] A Rocker Arm Actuator System Stuck On Bank 1
• P2651 [2] B Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2652 [1] B Rocker Arm Actuator System Stuck On Bank 1
• P1298 [1] Injector High Side Open - Bank 1
• P2649 [1] A Rocker Arm Actuator Control Circuit High Bank 1
• P1009 [1] P1009
• P0171 [1] System too Lean (Bank 1)
• P0420 [4] Catalyst System Efficiency Below Threshold (Bank 1)
• P0606 [2] PCM Processor Fault
• P2A00 [1] O2 Sensor Circuit Range/Performance Bank 1 Sensor 1
• P2900 [1] ISO/SAE Reserved