2006 ISUZU N-seriesIsuzu N-series 2006

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2006 ISUZU N-series.

ManufacturerKnown WMI(s)Fuel Type
ISUZU
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2006 ISUZU N-series?
     - There are 2 recall(s) for the 2006 ISUZU N-series, additional information is below.
NHTSA Mandated Recalls

  • Recall 97670 [USA]: Overheating of the extension cord could melt the oil pan heater plug and/or block heater plug, resulting in an increased risk of fire.

  • Recall R/2011/077 [UK]: Instrument cluster may not operate correctly

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • IB09-X-004C - EQUIPMENT ADAPTIVE/MOBILITY: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
  • IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
  • IB13R001E - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio covered by this bulletin is repaired under warranty and may also be used for radi
  • IB09J003C - ENGINE AND ENGINE COOLING: The following table contains many possible causes for the following symptoms. -hard start/no start -rough, misfire, unstable or incorrect idle -surges, lack of power, hesitation, lag or stumble while some of these symptoms may lead to c
  • IB19-N-001 - ELECTRICAL SYSTEM: Diesel engines isuzu commercial truck of america is pleased to announce the release of oem and fleet value (fv) electrical wire connectors for certain isuzu n-series and f-series trucks. In some instances, the electrical connectors listed
  • IB13R001C - EQUIPMENT: Isuzu n-series trucks equipped with optional isuzu-authorized alpine bluetooth radio (rpo codes i8h, i1v, or i2v) this bulletin outlines the procedures for using the alpine exchange program (the "exhange program"). The exchange program mu
  • IB17L001 - FUEL SYSTEM, DIESEL: Damage to fuel systems, including to both low and high pressure components, often results from fuel contamination. Operating a vehicle?S diesel engine on fuels and additives that do not meet the vehicle manufacturer?S specifications for lub
  • PIC5260C - VISIBILITY:SUN/MOON ROOF ASSEMBLY: This preliminary information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
  • PIP5540B - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP4925B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
  • PIP5540D - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5628 - ENGINE AND ENGINE COOLING: This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
  • PIC6107A - EQUIPMENT: This preliminary information communication provides information to the technician about being unable to receive onstar ?Over the air? Updates. Technician will need to press the onstar button and verify they have an active account and that t
  • IB18X002A - POWER TRAIN: Important: effective june 1, 2018 ? The iqc process will be transferred to isuzu technical assistance. As of june 1, 2018, please contact the isuzu technical assistance line at 1-877-isuzucv (1-877-478-9828), prompt 3, prior to replacing en
  • IB10X001E - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin is being issued to inform dealers of diesel particulate filter (dpf) cleaning recommendations, inspection practices, and recommended r&r procedures for service and cleaning system availability.
  • PIC5088E - EQUIPMENT: This preliminary information communication provides information to the technician about vehicles that may not receiving all channels on the xm band. Technician will need to use a scan tool and verify current digital radio receiver status un
  • PIT3099P - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information communication provides information to the technician about installing general motors accessory pats. Technician can check service information for some accessories. Technician can also contact partect for assista
  • PIP5232B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR: This preliminary information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspe
  • PIC5491G - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
  • PIC4310L - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIC5953A - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
  • PIT5264C - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicles that are travelling from canada to the united states. While in the united states they are unable to receive turn-by-turn directions. Due to the
  • PIT3271G - TIRES: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • PIC3278F - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
  • PIC4310K - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIC4801E - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician on how to diagnose and repair vehicles that may have an onstar turn-by-turn navigation the system that is inoperative. Technician verifies there are no diagno
  • PIC4310H - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIT4907A - BRAKES (PWS): This preliminary information communication provides information to the technician about brake rotors on new vehicles and replacement parts from general motors service parts operations. Technician should be advised the costing should not be
  • PIC4935D - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar
  • PIC5491D - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
  • PIP5163 - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIC5932 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about customers that may complain of various concerns when using bluetooth components. Technician should use the preliminary information to gather information
  • PIP5226 - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
  • PIT3099M - EQUIPMENT ADAPTIVE/MOBILITY: This preliminary information communication provides information to the technician about installing general motors accessory pats. Technician can check service information for some accessories. Technician can also contact partect for assista
  • PIC5959B - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This preliminary information communication provides information to the technician about vehicle that has no xm audio on certain channels but xm channel info is displayed. Technician will need to contact xm and deactivate and activate the mo
  • PIC4310J - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIP5163A - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIC5953 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
  • PIP5029G - ENGINE (PWS): This preliminary information communication provides information to the technician about vehicles that have a malfunction indicator lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need
  • PIC5491J - EQUIPMENT: This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
  • PIP5226A - EQUIPMENT: This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is
  • PIC3278F - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
  • IB12-J-003C - ENGINE (PWS): Proper installation of the fuel injector pipes into a long block assembly. The fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, fol
  • IB-14-X-001 - ENGINE AND ENGINE COOLING: Isuzu: information regarding corrosion inhibitor improvement that changes color of coolant to a dark color and is added at port to both radiator and surge tank. *pe
  • IB-12-J-003-B - ENGINE (PWS): Isuzu: information concerning the installation of the fuel injector pipes into a long block assembly. 1999 - 2002 isuzu fsr/ftr/fvr, 1999 - 2009 chevrolet or gmc t6500/t7500/t8500, 2000 - 2004 chevrolet or gmc wt5500, 2000 - 2004 isuzu frr,
  • IB-13-E-002 - SUSPENSION:FRONT:KING PIN: Isuzu: installation of a three bond 1215 part is recommended when installing the kingpin sealing plug. *kb
  • IB-13-E-001 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE: Isuzu: mainenance and lubrication reminder of the front axle kingpin. This is important for the steering system. *kb
  • SB-12-J-005 - ENGINE (PWS): Isuzu (chevrolet/gmc): trucks with diesel engine would have idle vibration, trouble starting, engine not revving up, and a lack of power due to possible operation condition of suction control valve (scv)/fuel rail pressure (frp) regulator
  • SB-09-J-002-C - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Isuzu (gmc, chevrolet): diesel engines equipped with egr cooler was diagnose for leaks with an egr cooler tester consisting of pressure regulator. Models isuzu n series-2005-2015, gmc/chevrolet w series 2005-10, isuzu f series 2007-09
  • SB-09-K-001 - POWER TRAIN:AUTOMATIC TRANSMISSION: Isuzu (chevrolet/gmc): the transmission slips, will not shift, or may overheat. Technicians may find dtcs P0894 or P0218 stored either current or in history. These conditions may be caused by friction material debonding from the torque c
  • CB-08-X-001 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Chevrolet\gmc\isuzu service campaign: see document search button for owner letter. Some isuzu npr and chevrolet, gmc w3500 12,000 lbs. Gvw trucks equipped with diesel engines may have a warranty and owner assistance information booklet whi
  • SB08-J-002 - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): Throttle actuator control (tac) module codes, mil/ses dtc's P2108, P1516, U0107, reduced engine power (reprogram pcm). *nj

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.