Isuzu N-series 2010
Vehicle Details: Recalls, Consumer Complaints, Service Bulletins
Below you will find all available information on the 2010 ISUZU N-series.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| ISUZU |
ISUZU VIN Decoder
Use the box here to look up VINs from ISUZU as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2010 ISUZU N-series?
- There are 3 recall(s) for the 2010 ISUZU N-series, additional information is below.
NHTSA Mandated Recalls
Recall 97682 [USA]: Overheating of the extension cord could melt the oil pan heater plug and/or block heater plug, resulting in an increased risk of fire.
Recall R/2011/078 [UK]: Reversing lamp may not function correctly
Recall R/2012/067 [UK]: Starter relay may overheat & burn out
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
- A WB08-X-001J - UNKNOWN OR OTHER: Policies and procedures update for all commercial vehicles. This bulletin provides instructions with regard to the isuzu commercial vehicle (cv) warranty parts center on the topics of parts retention, parts preparation for shipping, and adm
- SB23-J-001A - ENGINE AND ENGINE COOLING: The vacuum pump service part for affected vehicles listed in this bulletin has been superseded and is now the same vacuum pump that is the service part for the 6.6l gas engine. The updated pump requires the outlet vacuum hose be rerouted fo
- IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
- WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- IB09-X-004C - ENGINE AND ENGINE COOLING: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
- IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
- SB10K001I - POWER TRAIN:AUTOMATIC TRANSMISSION: In response to requests from the field and in an effort to reduce repair costs of aisin a465 6-speed transmission, the following on-vehicle procedures have been approved for service at the dealer level. The following procedures have been a
- IB13R001E - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio covered by this bulletin is repaired under warranty and may also be used for radi
- IB09J003C - ENGINE AND ENGINE COOLING: The following table contains many possible causes for the following symptoms. -hard start/no start -rough, misfire, unstable or incorrect idle -surges, lack of power, hesitation, lag or stumble while some of these symptoms may lead to c
- SB10K001H - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : In response to requests from the field and in an effort to reduce repair costs of the aisin a465 6-speed transmission, the following on-vehicle procedures have been approved for service at the dealer level. The following procedures have be
- IB10X001F - FUEL SYSTEM, DIESEL: Diesel particulate filter.
- IB08-X-002 - FUEL SYSTEM, DIESEL: Isuzu diesel engines available in the above affected vehicles meet the california air resource board's (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
- IB19-N-001 - ELECTRICAL SYSTEM: Diesel engines isuzu commercial truck of america is pleased to announce the release of oem and fleet value (fv) electrical wire connectors for certain isuzu n-series and f-series trucks. In some instances, the electrical connectors listed
- IB13R001C - EQUIPMENT: Isuzu n-series trucks equipped with optional isuzu-authorized alpine bluetooth radio (rpo codes i8h, i1v, or i2v) this bulletin outlines the procedures for using the alpine exchange program (the "exhange program"). The exchange program mu
- IB17L001 - FUEL SYSTEM, DIESEL: Damage to fuel systems, including to both low and high pressure components, often results from fuel contamination. Operating a vehicle?S diesel engine on fuels and additives that do not meet the vehicle manufacturer?S specifications for lub
- SB19L001 - FUEL SYSTEM, GASOLINE: The dual fuel tank control module and wiring harness assembly previously supplied by aipdn as replacement parts for the trax ii dual fuel tank option are no longer available. If either one of these components requires replacement the entir
- IB18X002A - POWER TRAIN: Important: effective june 1, 2018 ? The iqc process will be transferred to isuzu technical assistance. As of june 1, 2018, please contact the isuzu technical assistance line at 1-877-isuzucv (1-877-478-9828), prompt 3, prior to replacing en
- IB10X001E - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin is being issued to inform dealers of diesel particulate filter (dpf) cleaning recommendations, inspection practices, and recommended r&r procedures for service and cleaning system availability.
- IB08X002H - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Isuzu diesel engines available in the above affected vehicles meet the california air resource board?S (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
- IB08-X-002F - ENGINE (PWS): Isuzu diesel engines available in the above affected vehicles meet the california air resource board?S (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
- PIC5491J - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
- IB07-X-003J - EQUIPMENT ADAPTIVE/MOBILITY: The vehicle key has been improved in the above affected vehicles. The key design is more robust and the number of cuts in the key has been increased. As a result, important information is provided in this bulletin to assist dealers and cust
- IB15-L-001A - FUEL SYSTEM, OTHER: An investigation of returned number 1 and 2 egt sensors to the warranty parts center has identified a common occurrence of sensors being replaced with no trouble found (ntf). In order to better service the customer and stop the unnecessa
- IB15-K-002A - POWER TRAIN:AUTOMATIC TRANSMISSION: An investigation of inhibitor switches (replaced for dtc P0707) returned to the warranty parts center has identified a high frequency of switches being replaced with no trouble found (ntf). The most likely root causes of the P0707 dtc are
- IB12-J-003C - ENGINE (PWS): Proper installation of the fuel injector pipes into a long block assembly. The fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, fol
- IB12-N-001E - ELECTRICAL SYSTEM: Isuzu 2007-2015 my isuzu n-series: in extreme cold weather, there's no crank/no start, no fuel pressure/ fuel pump inoperation. *lj
- SB-12-K-003-A - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): Isuzu: reprogramming transmission control module (tcm), with revised calibrations, due to illumination of check transmission lamp, will prevent unnecessary replacement or repairs to aisin 6 speed automatic transmission. Model 2007-13 n se
- IB-14-X-001 - ENGINE AND ENGINE COOLING: Isuzu: information regarding corrosion inhibitor improvement that changes color of coolant to a dark color and is added at port to both radiator and surge tank. *pe
- IB-12-J-004-B - ENGINE (PWS): Isuzu: information concerning exhausts leaks, loss of coolant or over heating condition after a recent repair to one or both egr coolers. Appplies to 2007 - 2010 chenvrolet or gmc w3500/w4500/w5500, 2007 - 2015 isuzu npr/nprhd/nqr/nrr, 2007
- IB-12-J-003-B - ENGINE (PWS): Isuzu: information concerning the installation of the fuel injector pipes into a long block assembly. 1999 - 2002 isuzu fsr/ftr/fvr, 1999 - 2009 chevrolet or gmc t6500/t7500/t8500, 2000 - 2004 chevrolet or gmc wt5500, 2000 - 2004 isuzu frr,
- IB-12-N-001-A - ELECTRICAL SYSTEM: Isuzu: some vehicles may experience a no crank, no start, no tool communication condition in extremely cold weather situations. This failure may be caused by a stuck ecm main relay (x-30). Also included model n-series model year 2014-2015.
- IB-13-E-002 - SUSPENSION:FRONT:KING PIN: Isuzu: installation of a three bond 1215 part is recommended when installing the kingpin sealing plug. *kb
- IB-13-E-001 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE: Isuzu: mainenance and lubrication reminder of the front axle kingpin. This is important for the steering system. *kb
- SB-12-K-002 - POWER TRAIN:AUTOMATIC TRANSMISSION: Isuzu: due to insect nesting and/or debris left by flooding, fluid is leaking at top of automatic transmission dipstick tube, and a new breather hose vent was designed to reduce this condition. Models 2007-2012 n series, 2007-2010 w ser
- SB-12-J-005 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Isuzu (chevrolet/gmc): trucks with diesel engine would have idle vibration, trouble starting, engine not revving up, and a lack of power due to possible operation condition of suction control valve (scv)/fuel rail pressure (frp) regulator
- CSB-12-J-001 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Isuzu/gmc/chevrolet: see document search button for owner letter. During the process assembly of turbocharger engine, the housing became loose causing malfunction indicator lamp to illuminate and operation of vehicle revert to limp home
- SB-09-J-002-C - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Isuzu (gmc, chevrolet): diesel engines equipped with egr cooler was diagnose for leaks with an egr cooler tester consisting of pressure regulator. Models isuzu n series-2005-2015, gmc/chevrolet w series 2005-10, isuzu f series 2007-09
- SB08-J-001A - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER: Isuzu: turbocharger boost control solenoid circuit dtc P0045 false code detection. *kb
- SB-11-N-001 - ELECTRICAL SYSTEM:WIRING: Gm/izuzu: electrical problems including tail light or fuel guage malfunction. The abs/transmission/malfunction lights may be on. Water intrusion in wiring harnesses may be causing the problem. *rm
- IB-10-J-006 - UNKNOWN OR OTHER: Isuzu: there may be oil leaking from the left side of the engine. There is an improperly installed clamp problem. *rm
- IB10-J-005A - POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM): Izuzu: procedure to properly set up idle shut down. *rm
- IB-10-J-002 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Izuzu: 2011 izuzu n-series are equipped with a selective catalyst reduction system that reduces nitrogen oxide emissions from a diesel engine. *rm
- SB-10-J-002 - FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS: Isuzu truck: fuel injector failure-contaminated diesel fuel secondary fuel filter kit. Some returned fuel injectors has identified an occurrence of injector malfunction due to fuel contamination. It has been determined that many of these
- SB-09-J-006 - ENGINE AND ENGINE COOLING:ENGINE: Isuzu/gmc/chevrolet: oil related misdiagnosis-engine oil dipstick calibration incorrect. Models equipped with diesel particulate filler (dpf) and wholesaled before 12/03/09, were built with an incorrect engine oil dipstick calibration. T
- SB-IB09-J-002 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Isuzu/gmc/chevrolet: turbocharger inspection. A common occurrence of turbocharges being replaced for internal oil leaks. Results show that there is no fault with the turbocharger. The perceived oil leak actually may be a normal character
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | Y | None | None | 20190903 |
Tl* the contact owns a 2010 isuzu nrr. While driving 65 mph, the brake pedal was depressed and abs brake module failed. In addition, the brake and abs warning indicators illuminated simultaneously. The contact was able to stop the vehicle as intended. The contact stated that after returning to work and exiting the vehicle, he noticed an odor in the rear of the vehicle coming from the rear brakes. The contact stated that the brake shoes in the rear of the vehicle seized onto the brake drums due to overheating. The vehicle was towed to hfi truck center (located at 1463 us-22, mountainside, nj 07092, (908) 232-4600) where it was diagnosed that the abs brake module failed and caused severe damage to the abs pump, brake seals, brake drums, brake shoes, and wheel cylinder at the cost of $7,500. The vehicle was not repaired and the contact was informed that the vehicle was no longer under warranty. The manufacturer was informed of the failure. The failure mileage was 179,750.