2013 KENWORTH T800Kenworth T800 2013

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2013 KENWORTH T800, manufacturered by Kenworth Truck Company.

ManufacturerKnown WMI(s)Fuel Type
KENWORTH1NK 3WM SFN 2XK
KENWORTH VIN Decoder

Use the box here to look up VINs from KENWORTH as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2013 KENWORTH T800 produced?
     - The 2013 KENWORTH T800 is produced in Kirkland Wa, United States (usa).
  • Are there recalls for the 2013 KENWORTH T800?
     - There are 16 recall(s) for the 2013 KENWORTH T800, additional information is below.
NHTSA Mandated Recalls
  • Recall 250692 [USA]: Insufficient air volume can reduce braking performance and increase the risk of a crash.

  • Recall 146474 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.

  • Recall 124776 [USA]: An incorrectly sized airline may lengthen the distance needed to stop the vehicle, increasing the risk of a crash.

  • Recall 111022 [USA]: If engine oil comes into contact with a hot surface, there is an increased risk of a fire.

  • Recall 107998 [USA]: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

  • Recall 99747 [USA]: Brakes that take longer to apply may lengthen the distance needed to stop the truck, increasing the risk of a crash.

  • Recall 91499 [USA]: Fasteners which are not properly torqued to specification can result in the driveline separating from the vehicle, disabling the vehicle and increasing the risk of a crash. the separated component could also become a road hazard.

  • Recall 95933 [USA]: Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.

  • Recall 2020148 [Canada]: Lights and instruments

  • Recall 2017590 [Canada]: Accessories

  • Recall 2017267 [Canada]: Brakes

  • Recall 2015211 [Canada]: Engine

  • Recall 2015190 [Canada]: Electrical

  • Recall 2013057 [Canada]: Lights and instruments

  • Recall 2012285 [Canada]: Powertrain

  • Recall 2012027 [Canada]: Brakes

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 24KWD - SERVICE BRAKES, AIR: Certain c500/t440/t470/t660/t680/t800/t880/w900 chassis may have air tank reservoirs that do not meet air volume requirements per fmvss/cmvss 121 ??A?A?Air brake systems??A?A?. This bulletin will be updated when repair parts and procedur
  • E296 - ENGINE AND ENGINE COOLING: Kenworth is providing guidance for paccar mx engine composite oil pan leak troubleshooting to avoid over-repairs and to provide warrantable repair guidance. Oil leaks, if not repaired, can lead to severe engine damage.
  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 27-026 - POWER TRAIN: Eaton ultrashift plus excessive engine over-speed lamp on.
  • 26-037 - POWER TRAIN: Fix-as-fail - prior versions of eaton endurant transmission software may be prone to setting linear clutch actuator (lca) fault codes leading to possible lca hardware replacement.
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 34-085 - ELECTRICAL SYSTEM: Information only ⿿ vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • TIB43-062 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information only â¿¿ this bulletin provides information about the california air resources board (carb) periodic smoke inspection program (psip) and heavy duty vehicle inspection program (hdvip).
  • TT7399EN - POWER TRAIN: Tech tip concerning transmission control module (tcm) recalibration for kenworth
  • 27-026 - ENGINE (PWS): Fix-as-fail - engine over-speed lamp could come on after a downshift with the eaton ultrashift plus transmission. This does not affect the function of the vehicle.
  • TIB-01-063 - EQUIPMENT: Kenworth: some trucks sleeper heaters are experiencing a leakage from sleeper heater core o ring coolant. Model 2012-13 t680, t880. *pe
  • TIB-13-040 - SUSPENSION:MULTIPLE AXLE: Kenworth: some trucks failed to meet company standards for air volume lift axle and the company will increase air volume for worthwhile improvement to exceed government fmvss 121. Model t800, w900. *pe see document search butt
  • TIB-23-001 - POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE): Kenworth: see document search button for owner letter. Due to developing borate salt crystals from a batch of dot4 fluid, causing a blockage in clutch master cylinder and not able to compress clutch or poor pedal feel. Model 2013 t680, 8
  • TIB-43-040 - EQUIPMENT:OTHER:LABELS: Kenworth: see document search button for owner letter. There is an incorrect family name on greenhouse gas compliance label and needs to be replaced. Model t370, t440, t660, t800. *pe
  • TIB-02-135 - STRUCTURE:BODY:HOOD: Kenworth: procedural information provided regarding the replacement of hood where there are damaged hood pockets. Model t800. *pe
  • TIB-27-002 - POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER: Kenworth: information concerning the allison transmission which has the incorrect torque converter for the application. Applied vehicles 26 t800s, w900s, and c500s manufactured between 1/25/2013 and 7/15/2013 with isx engine and allison aut
  • E065 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Mx rc5-rc14 software update campaign. Software updates are said to benefit the engines in rc5 and rc14 kenworth engines. Paccar/kenworth. *kb
  • TIB-E-053 - FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: Kenworth: see document search button for owner letter. Line fatigue failure may be due to excessive vibrations of high pressure fuel lines and diesel fuel leak and malfunction indicator lamp. *pe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.