2009 MERCEDES-BENZ GLK350Mercedes-benz Glk350 2009

Vehicle Details: Service Bulletins

Below you will find all available information on the 2009 MERCEDES-BENZ GLK350.

ManufacturerKnown WMI(s)Fuel Type
MERCEDES-BENZ
MERCEDES-BENZ VIN Decoder

Use the box here to look up VINs from MERCEDES-BENZ as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI91.18-P-077075 - SEATS: Crease formation on genuine leather seat covers in vehicles with low mileage ??A?A? Objects left on the seats for extended periods of time (pressure marks). ??A?A? Objects wedged between the seat backrest and seat cushion (e.G. Seat bel
  • LI7240P056909 - ELECTRICAL SYSTEM:SOFTWARE: Window lifter and outside mirror on passenger side malfunction after replacement of door control unit.
  • LI0702P0547173 - ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL: Ticking or pulsing noise from high-pressure pump and/or fuel injectors.
  • NCU - HVAC Warra - EQUIPMENT: To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, mercedes-benz usa, llc (mbusa) has entered into a settlement regarding claims relating to alleged mold and mildew type
  • LI47.20-P-054958 - FUEL SYSTEM, GASOLINE: Combination message: "clean fuel filter" is displayed. The fault code 162500 (water level message - bosch) or P226997 (water level message - delphi) or 171600 (filter load - bosch) is stored in the engine control unit.
  • LI27.50-P-056467 - POWER TRAIN: Shift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300, P073400, P073500, P076F0
  • LI82.30-P-058874 - VISIBILITY: Passenger side wiper arm strikes vent grille of water collector
  • S-SC- 2013090008 - ELECTRICAL SYSTEM: This service campaign has been initiated because daimler ag (dag), the manufacturer of mercedes-benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized mercedes-benz deal
  • LI07.07-P-058244 - ENGINE AND ENGINE COOLING: Engine diagnosis warning lamp lights up. The fault code (fc) P0101fa or P0101fb or P0101fc is logged in the engine control unit.
  • GI88.40-P-057430 - EQUIPMENT: Message in instrument cluster "distronic pluscurrently unavailable - see owner's manual"
  • C1A140101 - EQUIPMENT:ELECTRICAL: This customer 1 action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the verizon
  • LI05.10-P-049909 - ENGINE AND ENGINE COOLING: Engine noises after engine start
  • LI07.08-P-060993 - ENGINE (PWS): Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "implausible data were received from the ethanol sensor"
  • LI-72-19-P053604 - EXTERIOR LIGHTING:TURN SIGNAL: Xentry (mercedes): the signal light for right rear turn is inoperative. Fault message displayed. *pe
  • LI-91-40P051830 - SEAT BELTS:FRONT:RETRACTOR: Mercedes-benz: the front seat belt catches when pulled out, because the strap was not guided back properly. Happens on both the passenger and driver's side. *rm updated 5/22/2012. *js
  • LI-27-60-P049270 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the auto-transmission switches to limp home mode or has no power. There are multiple possible fault codes. A piston may be damaged. *rm
  • LI-32-25 - POWER TRAIN:AXLE ASSEMBLY: Mercedes-benz: there is thumping or rattling noise from the front axle area when on uneven roads. There are several causes.*rm
  • LI-72-20 - STRUCTURE:BODY:DOOR : Mercedes-benz: on rough roads there is a knocking noise in the liftgate area. The stop buffers are too hard and are creating the noise during vibration. *rm
  • LI-82-30 - EXTERIOR LIGHTING: Mercedez-benz: auto lights inoperative mesage is displayed. This is a software problem. *rm
  • SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
  • TSB-82-00-695 - EXTERIOR LIGHTING:HEADLIGHTS: Mercedes: part change to banjo bolt for headlamp mount. The latch for the banjo bolt for the headlamp mount is no longer needed; therefore, the new part is now screwed onto the lamp frame using a thermoplastic nut *pe
  • LI-47-30 - ENGINE AND ENGINE COOLING:ENGINE: Mercedes (xentry): engine diagnosis warning lamp activated. Magnetic short between armature and pole core due to calibration error at valve and tolerance deviation by supplying manufacturer. This causes the purge valve to jam in the open
  • SC-2009080005 - STRUCTURE:BODY:TRUNK LID : Mercedes benz: adjust trunk lid stops. Due to tolerance and settling of the rubber seal the trunk lid may touch the bumper during closing on the affected vehicles. Dealers will adjust the trunk lid stops at the next workshop visit. *pe
  • LI46-20-P-048484 - STEERING: Xentry: steering leaky at internal oil lines. Connector of internal oil line or sealing washers/o-rings damaged. Not necessary to replace the entire steering system. Remove steering; replace both internal oil lines; install steering. Mo
  • LI-54-21 - EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH: Xentry: exterior lights constantly on. Possible components: low beams; front fog lamp; high beams; washer fluid pump and the headlamp cleaning system are also potentially affected. Hardware fault in driver side sam. Model 204. No model
  • TB-82-10-683 - EXTERIOR LIGHTING:HEADLIGHTS: Mercedes: headlamps vibrate. Vibration of the headlamps can be detected especially while stationary, perform the procedure to resolve. *pe
  • P-047912 - STRUCTURE:BODY:TAILGATE : Daimler(xentry): automatic liftgate sometimes doe not open or close completely. The drive unit of the liftgate control is actuated but does not manage to open or close the liftgate completely, (the liftgate starts moving but then stops).

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.