S-SC- 2013090008
Service Bulletin Details
Public Details for: S-SC- 2013090008
This service campaign has been initiated because daimler ag (dag), the manufacturer of mercedes-benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized mercedes-benz deal
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 -
Models from 2019
2019 MERCEDES-BENZ SL450 |
2019 MERCEDES-BENZ SL550 |
Models from 2018
2018 MERCEDES-BENZ SL450 |
2018 MERCEDES-BENZ SL550 |
Models from 2017
Models from 2016
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Campaign No. 2013090008, February 2014 Revision B A – Date 02/21/14 11/18/13 10/18/13 Purpose Revision to Warrranty information Update to work Procedure Initial release TO: ALL MERCEDES-BENZ CENTERS SUBJECT: Models 166 (ML), X166 (GL), 204 (C), X204 (GLK), 207 (E-Coupe), 212 (E), 218 (CLS), 231 (SL) Model Year 2013 Update mbrace Control Module Software This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of MercedesBenz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the mbrace control module software at the next workshop visit. Prior to performing this Service Campaign: Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described. Approximately 47,148 vehicles are affected. Order No. S-SC- 2013090008 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records. 2 Procedure Note: Use DAS/Xentry 09/2013 with add-on 3076 or higher. Follow the steps exactly as described in DAS/Xentry. Connect battery charger (battery voltage >12.5V). Ensure all electrical consumers are switched-off. In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Refer to Star Diagnosis System (SDS) Best Practices Guide. 1. Connect Star Diagnosis to vehicle. 2. Update mbrace emergency call system control unit (N123/4) software: Quick test view / mbrace (N123/4) / Adaptations / Control unit programming. 3. Follow on-screen instructions. Note: Refer to: LI82.95-P-056655 for more information. Perform service work on other vehicles while the software for the control module is being updated. S-SC- 2013090008 3 Note: The following allowable labor operation should be used when submitting a warranty claim for this repair: Warranty Information Operation: Connect/disconnect battery charger (02-5058) Star Diagnosis System (SDS), Connect/disconnect (02-4762) Update emergency call system control module software (02-8294). Damage Code 54 955 37 8 Operation Number 02-5058 02-4762 02-8294 Note Operation Number labor times are subject to change. S-SC- 2013090008 Labor Time (hrs.) 0.1 0.1 0.3