2009 MERCEDES-BENZ ML500Mercedes-benz Ml500 2009

Vehicle Details: Service Bulletins

Below you will find all available information on the 2009 MERCEDES-BENZ ML500.

ManufacturerKnown WMI(s)Fuel Type
MERCEDES-BENZ
MERCEDES-BENZ VIN Decoder

Use the box here to look up VINs from MERCEDES-BENZ as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • NCU-2023060005 - ELECTRICAL SYSTEM: Mercedes-benz ag ("mbag"), the manufacturer of mercedes-benz vehicles, has determined that on certain model year (??A?A?My??A?A?) 2009-2012 gl-class, ml-class, r-class, and s-class (164/166, 251, 221 platforms) vehicles, the coding for the
  • LI91.18-P-077075 - SEATS: Crease formation on genuine leather seat covers in vehicles with low mileage ??A?A? Objects left on the seats for extended periods of time (pressure marks). ??A?A? Objects wedged between the seat backrest and seat cushion (e.G. Seat bel
  • LI8330P0496447 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: No cooling output, fault code 9006 stored in air conditioning control unit.
  • LI77.21-P-072113 - VISIBILITY:SUN/MOON ROOF ASSEMBLY: Creaking noise from fixed glass section of panoramic roof in area of rear passenger compartment grab handles
  • LI68.20-P-070037 - EQUIPMENT: Armrest in center console (front) only opens on one side or not at all - model series 167
  • NCU - HVAC Warra - EQUIPMENT: To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, mercedes-benz usa, llc (mbusa) has entered into a settlement regarding claims relating to alleged mold and mildew type
  • S-B-67.00-29 - VISIBILITY: Since 12/2012 (model 166) and since 06/2013 (model 242) the glass breakage loops are no longer in the side windows and rear window. Suitable interior protection ensures that the interior monitoring function continues to operate correctly.
  • P-B-54.10-225d - ELECTRICAL SYSTEM: If it is necessary to replace an hv battery, the return will only be accepted with the filled-out ?Analysis sheet for transportability of high-voltage batteries form? Accompanied by: , the removed part, the quick test printout, the bms co
  • LI82.95-P-056655 - ELECTRICAL SYSTEM: Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery replacement.
  • LI82.85-P-055695 - ELECTRICAL SYSTEM: The comand unit does not start or the comand display remains dark. The comand unit cannot be operated. Note: the problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
  • LI82.10-P-054588 - EXTERIOR LIGHTING: Xenon burner inoperative or flickers
  • S-SC- 2013090008 - ELECTRICAL SYSTEM: This service campaign has been initiated because daimler ag (dag), the manufacturer of mercedes-benz vehicles, has determined that the mbrace software does not correspond to current production configuration. An authorized mercedes-benz deal
  • LI49.20-P-056353 - ELECTRICAL SYSTEM: Engine diagnosis warning lamp active. Fault code 20be1b and/or 20bd1b (the heating element of the adblue tank has a malfunction) is logged in the blue-tec control unit.
  • LI49.20-P-056353 - ELECTRICAL SYSTEM: Engine diagnosis warning lamp active. Fault code 20be1b and/or 20bd1b (the heating element of the adblue tank has a malfunction) is logged in the blue-tec control unit.
  • LI46.15-P-058505 - STEERING: Creaking noise when making vertical or longitudinal adjustment to electrical steering column
  • LI32.20-P-057942 - SUSPENSION: Thumping noises from front axle when driving over bumps on road.
  • LI14.20-P-052079 - ENGINE AND ENGINE COOLING: Engine diagnosis warning lamp lights up - fault code entry (fc) 14a600 or 14a700
  • GI88.40-P-057430 - EQUIPMENT: Message in instrument cluster "distronic pluscurrently unavailable - see owner's manual"
  • C1A140101 - EQUIPMENT:ELECTRICAL: This customer 1 action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the verizon
  • LI91.25-P-059380 - SEATS: Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
  • LI91.10-P-050164 - ELECTRICAL SYSTEM: Noises from the mounting of the rear weight sensing system (wss) sensors
  • LI68.20-P-053607 - ELECTRICAL SYSTEM: Noise in center console area of w166.
  • LI67.30-P-055417 - ELECTRICAL SYSTEM: Side windows may make noises when closing and opening, or reverse direction when closing.
  • LI67.30-P-052837 - ELECTRICAL SYSTEM: Side windows may make noises when closing and opening, or reverse direction when closing.
  • LI35 30-P-058566 - POWER TRAIN: Throttle lift-off clunking noises at drive shafts of rear axle
  • LI05 20-P-067123 - ENGINE (PWS): Oil in engine wiring harness
  • LI07.08-P-060993 - ENGINE (PWS): Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "implausible data were received from the ethanol sensor"
  • LI46-20P-055943 - STEERING:GEAR BOX (OTHER THAN RACK AND PINION): Xentry (mercedes): rattling noise coming from the area of the steering column tube system, when driving over rough road and when accelerating or braking, there would be cracking noises. Models 164, 251. No model years listed. *pe
  • LI46-10P-054715 - STEERING: STEERING WHEEL/HANDLE BAR: Mercedes (xentry): due to amine deposits from steering wheel foam, horn plate of steering wheel, short circuited, causing the multifunction buttons, on steering wheel, to be non-functional. Models 164, 251. No model years listed.
  • LI-91-40-P050718 - SEAT BELTS:FRONT: Xentry(mercedes): bulletin provided regarding control unit detecting an undervoltage after buckling up (belt slack elimination) during seat belt adjustment sequence. *pe updated 5/23/12. *js
  • LI46-20-P051767 - STEERING:GEAR BOX (OTHER THAN RACK AND PINION): Mercedes-benz: the steering is leaking in the input shaft, below the protective cap. There is wear on a seal ring located in the control head. *rm updated 5/17/2012 *js
  • LI-27-60-P049270 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the auto-transmission switches to limp home mode or has no power. There are multiple possible fault codes. A piston may be damaged. *rm
  • LI-33-25 - SUSPENSION:FRONT:WHEEL BEARING: Mercedes-benz: at the front wheel bearing there is a loud knock sound when going around a corner at slow speeds. There is an insufficient fit at the bearings. *rm updated 10/14/11. *pe updated 6/19/13. *pe
  • LI-07-08 - ENGINE AND ENGINE COOLING:ENGINE: Mercedes-benz: the starter clicks but does not crank when trying to start. A voltage dip is causing the ignition procedure to fail. *rm
  • LI-80-57 - STEERING: Mercedes-benz: diagnostic procedures for the driver authorization system. *rm
  • SB-20101100005 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes-benz: software update for heater lines. *rm
  • LI-68-50 - EQUIPMENT ADAPTIVE/MOBILITY: Mercedes-benz: the load compartment roller blind has catch bolts loose or broken from improper force when using. *rm
  • SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
  • LI03-20-P-048278 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Mercedes (xentry): engine makes noise, ticking/crackling at idle speeds up to approx. 1500 rpm. Run in effect of 1st crankshaft main bearing. Models 211, 219, 164, 251, 203, 204, 209, 221, 461 and 463. No model years listed. *pe
  • LI91-22-P-048771 - SEATS:MID/REAR ASSEMBLY: Mercedes: the electrically folding 3rd seat row makes noises while folding up and down, or the folding function does not work at all. A warning message about locking the 3rd seat row may also appear in the display. *pe
  • LI-47-30 - ENGINE AND ENGINE COOLING:ENGINE: Mercedes (xentry): engine diagnosis warning lamp activated. Magnetic short between armature and pole core due to calibration error at valve and tolerance deviation by supplying manufacturer. This causes the purge valve to jam in the open
  • SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset
  • P-049567 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Mercedes: battery symbol and service required (in white). Fault message is displayed if the charge level is too low or the park pawl additional battery is defective. In addition fault code fc 9061 and/or fc 9062 is stored in the front sa
  • SB-91-40-192 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mercedes: replacing the emergency tensioning retractor. When replacing the left front reversible emergency tensioning retractor (a76) or the right front reversible emergency tensioning retractor (a76/1), return the damaged part to the qec
  • SB-2009120003 - ENGINE AND ENGINE COOLING:COOLING SYSTEM: Mercedes benz: check coolant protection level of the hybrid power electronics module and high voltage battery, correct if necessary. Model and my 164 2010. *pe
  • LI-72-00-P - STRUCTURE:BODY:DOOR: Xentry: outside door handle no longer returns to end position. Due to a bent pin in the dynamic balancer, the support spring of the bearing bracket can slide out of place or become unhooked. Models 164, 251, 166, 204, 212. No model years
  • LI-58-40 - ELECTRICAL SYSTEM: Xentry (mercedes): engine warning lamp is currently on or was on and a delay fault of the camshaft adjust to current or stored in the engine control unit. Models 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, and 403. No model years li
  • TB-P-047927 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION:LINES AND FITTINGS: Mercedes: following fault codes are entered in the control unit and displayed-fc5320 drain valve:open circuit or insufficient valve current in models series 211, 219; fc5260 drain valve open circuit or insufficient valve current in model 2
  • SB-P-047928 - ELECTRONIC STABILITY CONTROL: Mercedes: electronic stability program (esp), stability control (sr). References revised and reference to af deleted/supersedes dtb tb 42.45/42. Esp lamp on. Contact fault at connection for esp control unit mk25 (n47). No model years l
  • SB-47-20-56 - FUEL SYSTEM, OTHER:DELIVERY: Mercedes: ensuring unobstructed movement for the fuel level sensor. When installing the left or right fuel level sensor, it is essential for it to have unrestricted, unobstructed movement. *pe
  • TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an
  • TSB-2009020004 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Mercedes: it has been determined that the tele aid may not function properly as a result of a hardware fault in the tele aid control module. If this condition exists an instrument cluster message of no service and tele aid inoperable will

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.