LI27.50-P-056467

Service Bulletin Details

Public Details for: LI27.50-P-056467

Shift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300, P073400, P073500, P076F0


- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -

Shift quality complaints and/or automatic transmission
in limp-home mode in combination with the fault codes
P060600, P072200, P072300, P072364, P072900, P073000
P073100, P073200, P073300, P073400, P073500, P076F00
Topic number
LI27.50-P-056467
Version
4
Design group
27.50 Gear assembly
Date
07-26-2013
Validity
Model series 231 with CODE 803
X204, model series 207, model series 212, model series
218 and model series 231 with CODE 804
Reason for change
Remedy adapted.
Reason for block
Complaint:
Shift quality complaints and/or automatic transmission in limp-home mode in combination with one or more of the
following fault codes: P060600, P072200, P072300, P072364, P072900, P073000, P073100, P073200, P073300,
P073400, P073500, P076F00.
Cause:
The output speed sensor can wander out of the signal trigger range due to mechanical vibrations. Under certain circumstances this can result in a failure to register the output speed of the automatic transmission until the next ignition
cycle.
Remedy:
The following Xentry Diagnostics add-ons must be installed for the following remedies:
•
•
Add-on 2889 and 2908 for DVD 05/2013
Add-on 2909 for DVD 07/2013
Before carrying out the remedies, please check the corresponding vehicle data card for the necessary CODE (all specified code conditions must be fulfilled simultaneously).
Remedy for vehicles with CODE 804, with CODE 32A, without CODE 01A:
Please install a fully integrated transmission control repair kit A 000 270 35 00 and update the software of the automatic transmission.
Remedy for vehicles with CODE 804, with CODE 32A, with CODE 01A:
Please install a fully integrated transmission control (VGS) repair kit A 000 270 34 00 and update the software of the
automatic transmission.
07-26-2013 4:31 PM
© Copyright Daimler AG
PARKEGL
Page 1/3
Remedy for vehicles with CODE 804, without CODE 32A, without CODE 35A, without CODE 01A, and model series
231 with CODE 803:
If the fully integrated transmission control (VGS) is intact, update the software of the automatic transmission.
If the fully integrated transmission control (VGS) is defective, install a fully integrated transmission control (VGS) repair kit A 000 270 35 00 and then update the software of the automatic transmission.
Remedy for vehicles with CODE 804, with CODE 01A, without CODE 32A, without CODE 35A:
If the fully integrated transmission control (VGS) is intact, update the software of the automatic transmission.
If the fully integrated transmission control (VGS) is defective, install a fully integrated transmission control (VGS) repair kit A 000 270 34 00 and then update the software of the automatic transmission.
Note:
Part numbers are non-stocking DRT parts and must be ordered for a specific VIN number.
Symptoms
Power transmission / Automatic transmission / Automatic transmission - function / General
Power transmission / Automatic transmission / Automatic transmission - function / No power flow
Power transmission / Automatic transmission / Automatic transmission - function / Electrical fault/Fault code
Power transmission / Automatic transmission / Automatic transmission - function / Poor shift quality
Parts
Part number
ES1 ES2 Designation
Quantity Note
EPC Other
make
part
A 000 270 34 00
Fully integrated transmission
control (VGS) repair kit
1
FBS3
X
A 000 270 35 00
Fully integrated transmission
control (VGS) repair kit
1
FBS4
X
Work units
Op. no.
Operation text
Time
Damage
code
Note
27-2382
REPLACE SUPPORTING BODY OF
ELECTRICAL KIT FOR AUTOMATIC
TRANSMISSION
23 AW
53377 73
Should only be used if fully integrated transmission control (VGS) repair kit has been installed.
54-0992
CODE AUTOMATIC TRANSMISSION
CONTROL UNIT
2 AW
54-0991
INSTALL AUTOMATIC TRANSMISSION CONTROL UNIT SOFTWARE
4 AW
02-5058
CONNECT/DISCONNECT BATTERY
CHARGER
1 AW
07-26-2013 4:31 PM
© Copyright Daimler AG
PARKEGL
Should only be used if fully integrated transmission control (VGS) repair kit has been installed.
54553 90
Page 2/3
02-4762
CONNECT/DISCONNECT DIAGNOSTIC SYSTEM
2 AW
Validity
Vehicle
Engine
Transmission
CLS (218)
276
722
CLS (218)
278
722
CLS (218)
651
722
CLS (218)
642
722
E (207)
642
722
E (207)
276
722
E (207)
278
722
E (207)
651
722
E (207)
274
722
E (207)
271
722
E (212)
276
722
E (212)
651
722
E (212)
278
722
E (212)
271
722
E (212)
274
722
E (212)
642
722
GLK (204)
651
722
GLK (204)
642
722
GLK (204)
274
722
GLK (204)
276
722
GLK (204)
272
722
SL (231)
276
722
SL (231)
278
722
07-26-2013 4:31 PM
© Copyright Daimler AG
PARKEGL
Page 3/3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.